trurl Posted April 6, 2017 Share Posted April 6, 2017 4 hours ago, tunetyme said: ... 2 empty slots disks 7 & 8 (used for preclearing, copying etc. ... I went through the conversion process from rfs to xfs. In that process there was a recommendation to have both include in each plus exclude slots 7 & 8 (disk). I have an error for both shares saying I am including and excluding and to correct this. Both share indicate that neither share is excluding any disks. However it also only shows 6 disks not 8. I'm confused by this description. It makes some sense to talk about a slot number, but if it is empty, it does not have a disk number in the array, and excludes and includes only apply to disks in the array. Maybe if you could quote or give a link to the "recommendation" it might give some context. Quote Link to comment
trurl Posted April 6, 2017 Share Posted April 6, 2017 1 minute ago, trurl said: I'm confused by this description. It makes some sense to talk about a slot number, but if it is empty, it does not have a disk number in the array, and excludes and includes only apply to disks in the array. Maybe if you could quote or give a link to the "recommendation" it might give some context. Maybe you have those empty slots excluded in Global Share Settings? Post diagnostics. Quote Link to comment
GeekMajic Posted April 6, 2017 Share Posted April 6, 2017 Feature Request: Can "Fix Common Problems" be made to coordinate with "Auto-Update"? I have Auto Update set to 3 days after a new version, but Fix Common starts warning me once the new version is released. Can they either coordinate or can Fix Common be set to allow X number of days before a warning is displayed? Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 Just now, GeekMajic said: Feature Request: Can "Fix Common Problems" be made to coordinate with "Auto-Update"? I have Auto Update set to 3 days after a new version, but Fix Common starts warning me once the new version is released. Can they either coordinate or can Fix Common be set to allow X number of days before a warning is displayed? Hmm. I'm sure that doesn't happen on either of my systems as long as the plugin is set to auto update within auto update's settings.... I'll reconfirm though... Quote Link to comment
GeekMajic Posted April 6, 2017 Share Posted April 6, 2017 @Squid Do you have notifications set to Error and Warning in Fix Common? Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 Just now, GeekMajic said: @Squid Do you have notifications set to Error and Warning in Fix Common? TBQH, I have notifications from FCP disabled, as I'm continually testing various scenarios to help people out here, and I always forget to undo the errors that I induce in my server's, and the daily notifications I get drive me nuts.... I'll check out what you're seeing tonight Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 (edited) 3 hours ago, trurl said: I'm confused by this description. It makes some sense to talk about a slot number, but if it is empty, it does not have a disk number in the array, and excludes and includes only apply to disks in the array. Available slots and my disk number are the same number in my system. I forget that I organize things a little differently than most people. The slot number is the disk number so slot number 7 is disk number 7. Now that I have finished the conversions there isn't a disk 7 or 8 in the system. Edited April 6, 2017 by tunetyme clarify Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 Here are the diagnostics. tower-diagnostics-20170406-1153.zip Quote Link to comment
trurl Posted April 6, 2017 Share Posted April 6, 2017 36 minutes ago, tunetyme said: Available slots and my disk number are the same number in my system. I forget that I organize things a little differently than most people. The slot number is the disk number so slot number 7 is disk number 7. Now that I have finished the conversions there isn't a disk 7 or 8 in the system. This is exactly how I would number them also and since this is how unRAID numbers them everyone should number them this way to avoid confusion. Sorry, I was just confused by the mention of disk7, which as you say, doesn't exist. 8 hours ago, tunetyme said: I went through the conversion process from rfs to xfs. In that process there was a recommendation to have both include in each plus exclude slots 7 & 8 (disk). I have an error for both shares saying I am including and excluding and to correct this. Both share indicate that neither share is excluding any disks. However it also only shows 6 disks not 8. I see this in your syslog Apr 6 03:09:03 Tower root: Fix Common Problems: Warning: Share S is set for both included (disk2,disk3,disk4,disk5,disk6) and excluded (disk7,disk8) disks but as you say, that share doesn't have any excludes currently in your diagnostics. shareInclude="disk2,disk3,disk4,disk5,disk6" shareExclude="" Did you change that share's settings after the timestamp for that warning in your syslog? If you go to Fix Common Problems and have it scan again, does it still give that warning? Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 Yes, It gives me the warning for both shares P and S. I have rebooted as well. I could put a couple of disks in those to slots and see if that will allow me to "uncheck" those disks, however I have formatted them to be backup disks NTFS. Will that be a problem? Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 Can you upload here the actual .cfg files for those shares in question from the flash drive (config/shares/...) and not the ones from the diagnostics for me to seeSent from my LG-D852 using Tapatalk Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 5 hours ago, GeekMajic said: Feature Request: Can "Fix Common Problems" be made to coordinate with "Auto-Update"? I have Auto Update set to 3 days after a new version, but Fix Common starts warning me once the new version is released. Can they either coordinate or can Fix Common be set to allow X number of days before a warning is displayed? You found a bug that was introduced in November. Fixed Quote Link to comment
GeekMajic Posted April 6, 2017 Share Posted April 6, 2017 @Squid Yay, I'll take the large, blue bear as my prize. I updated the plugin to today's version. I'll give it a few days and see what happens. Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 Just now, GeekMajic said: I'll take the large, blue bear as my prize Always wondered at why people would take the bear that's already been asphyxiated, instead of simply getting the white bear and choking it themselves.... Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 4 hours ago, Squid said: Can you upload here the actual .cfg files for those shares in question from the flash drive (config/shares/...) and not the ones from the diagnostics for me to see As requested, I think you were addressing this request to me. S.cfg P.cfg Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 1 minute ago, tunetyme said: As requested, I think you were addressing this request to me. S.cfg P.cfg Interesting. Those are definitely from the flash drive and not the diagnostics zip file? And you haven't made any adjustments to the share settings? Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 No adjustments and yes they are from the flash drive Quote Link to comment
GeekMajic Posted April 6, 2017 Share Posted April 6, 2017 12 minutes ago, Squid said: Always wondered at why people would take the bear that's already been asphyxiated, instead of simply getting the white bear and choking it themselves.... Cause I don't feel like fighting with it to sit still and shut up. 1 Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 I certainly tried to make changes from within the plugin Quote Link to comment
trurl Posted April 6, 2017 Share Posted April 6, 2017 3 minutes ago, tunetyme said: I certainly tried to make changes from within the plugin If you mean the Settings page for the User Share, that is not a plugin. If you do mean a plugin, then which plugin? Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 Fix Common Problems This only diagnosed the problem my error. It was set under User Shares in the GUI Quote Link to comment
Squid Posted April 6, 2017 Author Share Posted April 6, 2017 @trurl, @tunetyme I ran those .cfg files through FCP, (and made the appropriate folder within /mnt/user), and it doesn't generate anything at all. Nor should it, because there is nothing wrong with the setting. The initial post stated "... recently updated updated from 4.7 to 6.3.3" My guess is that the errors were indeed valid with the initial configs of the shares. And FCP caught that. At some point you went in and changed a setting or what not within the shares and that has corrected the error (I know this happened, because shareFruit and shareCOW is part of the configs which is definitely not part of 4.7 / 5.x ) Some of the confusion may arise from how FCP works. After errors are detected, those errors will continually display within FCP until a rescan or a reboot or performed (to aid you in fixing the problems). I would guess that if you went back into FCP and rescanned then you would not see those two errors anymore. Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 This is straight from FCP Warnings Found Suggested Fix Share S is set for both included (disk2,disk3,disk4,disk5,disk6) and excluded (disk7,disk8) disks While if you're careful this isn't a problem, there is absolutely no reason ever to specify BOTH included and excluded disks. It is far easier and safer to only set either the included list or the excluded list. Fix it here: Ignored Errors & Warnings Suggested Fix Plugin Update Check not enabled Highly recommended to have dynamix check for plugin updates (including for the webUI All Ignored Errors & Warnings Plugin Update Check not enabled Share S is set for both included (disk2,disk3,disk4,disk5,disk6) and excluded (disk7) disks Share P is set for both included (disk1) and excluded (disk7) disks Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 After Rescan I thought this would automatically update (rescan) after rebooting the system Warnings Found Suggested Fix Docker Update Check not enabled Recommended to enable update checks for docker applications Ignored Errors & Warnings Suggested Fix Plugin Update Check not enabled Highly recommended to have dynamix check for plugin updates (including for the webUI All Ignored Errors & Warnings Plugin Update Check not enabled Share S is set for both included (disk2,disk3,disk4,disk5,disk6) and excluded (disk7) disks Share P is set for both included (disk1) and excluded (disk7) disks Quote Link to comment
tunetyme Posted April 6, 2017 Share Posted April 6, 2017 Share S is set for both included (disk2,disk3,disk4,disk5,disk6) and excluded (disk7) disks Share P is set for both included (disk1) and excluded (disk7) disks Cleared these. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.