unJim Posted February 24, 2017 Share Posted February 24, 2017 11 minutes ago, saarg said: As far as I know there is an enigma2 Plugin to connect to tvheadend. This way you could record everything on tvheadend and still use your dreambox. Thanks, I wasn't aware of that, I currently have it set up to record to unRAID using NFS but that might actually be better, I'll look into it. Quote Link to comment
j0nnymoe Posted February 24, 2017 Share Posted February 24, 2017 1 minute ago, unJim said: Tried that, it doesn't work with the dreambox for some reason, I don't know why as it works with everything else but the dreambox doesn't get the correct frequencies from minisatip (I'm thinking the DiSEqC commands aren't getting passed through) so I gave up on that idea Ahh ok, not sure what else to suggest! I haven't used tvheadend itself as a satip server. Personally for my DVB-S stuff, I run a Digibit R1 which is a network satip device, which I use via tvheadend, great bit of kit. Quote Link to comment
saarg Posted February 24, 2017 Share Posted February 24, 2017 1 minute ago, unJim said: Thanks, I wasn't aware of that, I currently have it set up to record to unRAID using NFS but that might actually be better, I'll look into it. I'm not 100% sure it exist though. Quote Link to comment
unJim Posted February 24, 2017 Share Posted February 24, 2017 25 minutes ago, j0nnymoe said: Ahh ok, not sure what else to suggest! I haven't used tvheadend itself as a satip server. Personally for my DVB-S stuff, I run a Digibit R1 which is a network satip device, which I use via tvheadend, great bit of kit. It's quit possible when I get tvheadend listening on port 554 I'll have the same issue, although I'm hoping not. That Digibit R1 looks nice, probably should have bought one of them instead Quote Link to comment
saarg Posted February 24, 2017 Share Posted February 24, 2017 1 hour ago, unJim said: It's quit possible when I get tvheadend listening on port 554 I'll have the same issue, although I'm hoping not. That Digibit R1 looks nice, probably should have bought one of them instead If the problem was only with the dreambox, you might want to bug the developers to fix it. It doesn't sound like a minisatip bug if every other client works. Quote Link to comment
unJim Posted February 24, 2017 Share Posted February 24, 2017 1 hour ago, saarg said: If the problem was only with the dreambox, you might want to bug the developers to fix it. It doesn't sound like a minisatip bug if every other client works. Yeah, I've now had tvheadend running sat>ip on port 554, it did allow me to tune into a few channels intermittently, sometimes it would work, sometimes it wouldn't, when it wouldn't it would flood the logs with; 2017-02-24 19:11:32.352 http: 192.168.1.5: RTSP/1.0 SETUP rtsp://192.168.1.10:554/?pids=0 -- 400 and pretty much kill the tvheadend web interface, it doesn't look like it is always asking for the correct stream. Has to be a problem with the sat>ip client on the dreambox. Guess I'll have to find another way. Quote Link to comment
saarg Posted February 24, 2017 Share Posted February 24, 2017 8 minutes ago, unJim said: Yeah, I've now had tvheadend running sat>ip on port 554, it did allow me to tune into a few channels intermittently, sometimes it would work, sometimes it wouldn't, when it wouldn't it would flood the logs with; 2017-02-24 19:11:32.352 http: 192.168.1.5: RTSP/1.0 SETUP rtsp://192.168.1.10:554/?pids=0 -- 400 and pretty much kill the tvheadend web interface, it doesn't look like it is always asking for the correct stream. Has to be a problem with the sat>ip client on the dreambox. Guess I'll have to find another way. Ditch the dreambox and get a shield Tv and let tvheadend deal with recording and streaming to clients Quote Link to comment
unJim Posted February 24, 2017 Share Posted February 24, 2017 9 minutes ago, saarg said: Ditch the dreambox and get a shield Tv and let tvheadend deal with recording and streaming to clients I've considered it, they do look nice . Can't tear myself away from the dreambox at the moment though, I can't find anything that handles bouquets as well as it does (AutoBouquetMaker), it "just works". Quote Link to comment
saarg Posted February 24, 2017 Share Posted February 24, 2017 11 minutes ago, unJim said: I've considered it, they do look nice . Can't tear myself away from the dreambox at the moment though, I can't find anything that handles bouquets as well as it does (AutoBouquetMaker), it "just works". I have never used bouquets. It's basically just a tag on every channel to easily get to a specific type of channels, right? Quote Link to comment
unJim Posted February 24, 2017 Share Posted February 24, 2017 11 minutes ago, saarg said: I have never used bouquets. It's basically just a tag on every channel to easily get to a specific type of channels, right? Basically yep; channel numbers are automatically assigned to be the same as the provider and it updates itself when numbers get changed around. everything is categorised and easy to find and it's all automated. When I first started playing around with this stuff it took too much babysitting, when providers moved channels around things broke. This I just set and forget. Quote Link to comment
saarg Posted February 24, 2017 Share Posted February 24, 2017 So it's a UK thing as @j0nnymoe also love bouquets.... To be serious, I watch too few channels to use it. I mostly record stuff and the live TV I watch is mostly football. Quote Link to comment
CHBMB Posted February 24, 2017 Share Posted February 24, 2017 I've never bothered with bouquets either. Maybe I should take a look. Quote Link to comment
j0nnymoe Posted February 25, 2017 Share Posted February 25, 2017 bouquets is only really a DVB-S thing as on DVB-T(2) channels are restricted via frequency. Quote Link to comment
CHBMB Posted February 25, 2017 Share Posted February 25, 2017 Yeah, I realised that, still got to setup the DVB-S card in my HTPC though, just need to find the time. Quote Link to comment
unJim Posted February 25, 2017 Share Posted February 25, 2017 They're especially useful when having multiple satellite feeds, without them I'd have a list of 3500 random channels to scroll through! Quote Link to comment
meep Posted March 3, 2017 Share Posted March 3, 2017 I have a TVHeadEnd hardware config question hopefully someone cn help me with.... Until recently, I was running TvHeadEnd in a plugin with my Digital Devices Octopus and DVB-T and DVB-S tuners all running on UnRaid DVB Edition. A recent power cut brought down my server and, on restart, I couldn't get my DVB-T tuners to work (they showed up OK but didn't receive a signal). Having planned for some time to migrate to this Docker, I figured this was the opportunity to bite the bullet. I updated unRAID DVB to 6.3.2 and installed the docker. DVB Edition reports all my tuners present but when I look at the TvAdapters tab of TVHeadEnd, there's an oddity. (images attached) Tuners 0 and 1 are DVB-T and they work OK. Tuners 2 and 5 are on one Octopus daughtercard and they show up and tune channels. However, tuners 3 and 4 show up strangely. On the working DVB-S, the tuner device is shown under 2 directory levels, whereas on the non-working DVB-S tuner, it shows under 1 and has a 'folder' name (if that makes sense). The upshot is that I cannot assign a network to these tuners so I'm down to 2x rather than 4x DVB-S tuners. Any thoughts on this appreciated! Quote Link to comment
saarg Posted March 3, 2017 Share Posted March 3, 2017 4 hours ago, meep said: I have a TVHeadEnd hardware config question hopefully someone cn help me with.... Until recently, I was running TvHeadEnd in a plugin with my Digital Devices Octopus and DVB-T and DVB-S tuners all running on UnRaid DVB Edition. A recent power cut brought down my server and, on restart, I couldn't get my DVB-T tuners to work (they showed up OK but didn't receive a signal). Having planned for some time to migrate to this Docker, I figured this was the opportunity to bite the bullet. I updated unRAID DVB to 6.3.2 and installed the docker. DVB Edition reports all my tuners present but when I look at the TvAdapters tab of TVHeadEnd, there's an oddity. (images attached) Tuners 0 and 1 are DVB-T and they work OK. Tuners 2 and 5 are on one Octopus daughtercard and they show up and tune channels. However, tuners 3 and 4 show up strangely. On the working DVB-S, the tuner device is shown under 2 directory levels, whereas on the non-working DVB-S tuner, it shows under 1 and has a 'folder' name (if that makes sense). The upshot is that I cannot assign a network to these tuners so I'm down to 2x rather than 4x DVB-S tuners. Any thoughts on this appreciated! This is most likely something to do with the dvb drivers and not tvheadend I think. You updated unraid and it have a new kernel. Did the driver version also change? Quote Link to comment
CHBMB Posted March 4, 2017 Share Posted March 4, 2017 (edited) Yeah there was a minor version change with the drivers..... @meepTry this build here. Edited March 4, 2017 by CHBMB Quote Link to comment
Zan Posted March 7, 2017 Share Posted March 7, 2017 Is anyone else using mkv recording profile? The mkv files tvheadend is producing can't be "seeked" on my Win10 PC with VLC. Also comskip is not generating .edl files when mkv profile is selected. I've switched to passthrough and can now seek and generate .edl files (which vlc can't make use of so now switched to smplayer) but I'd like to switch back to mkv if possible. Has anyone been able to resolve the "seek" and edl issues I've experienced? Quote Link to comment
saarg Posted March 7, 2017 Share Posted March 7, 2017 1 hour ago, Zan said: Is anyone else using mkv recording profile? The mkv files tvheadend is producing can't be "seeked" on my Win10 PC with VLC. Also comskip is not generating .edl files when mkv profile is selected. I've switched to passthrough and can now seek and generate .edl files (which vlc can't make use of so now switched to smplayer) but I'd like to switch back to mkv if possible. Has anyone been able to resolve the "seek" and edl issues I've experienced? What do you mean by seek? To fast forward or just click somewhere on the time line to jump there? Both is working fine with Kodi and media player classic, so it looks like a VLC problem. As for comskip, I think it was working when I tested it on mkv. I would have to check it when I have time in the weekend. Quote Link to comment
Marv Posted March 7, 2017 Share Posted March 7, 2017 (edited) Hi, just wondering if someone using this container can tell me how and if you are able to shutdown your server and still be able to wake it up automatically for your recordings? Am I right that this may not be possible using Docker? Edited March 7, 2017 by Marv Quote Link to comment
CHBMB Posted March 7, 2017 Share Posted March 7, 2017 I've never had much success sleeping and waking unraid personally. Off the top of my head, I can't think of a good way to achieve what you're aiming for. Quote Link to comment
saarg Posted March 7, 2017 Share Posted March 7, 2017 19 minutes ago, Marv said: Hi, just wondering if someone using this container can tell me how and if you are able to shutdown your server and still be able to wake it up automatically for your recordings? Am I right that this may not be possible using Docker? I know it's possible with the plugin, but as of now it's not possible with the container. Quote Link to comment
meep Posted March 7, 2017 Share Posted March 7, 2017 On 3/3/2017 at 7:17 PM, saarg said: This is most likely something to do with the dvb drivers and not tvheadend I think. You updated unraid and it have a new kernel. Did the driver version also change? So it turns out it may be TVHeadEnd after all. I reverted to the 4.09 Stable Docker (I had initially installed Default/Latest in which I had the described problem). Immediately, the tuners all showed up as I would expect: I ran the Docker update and now I'm on tvheadend 4.1.x. Don't quite understand how that happened but the tuners are still correctly displayed. This is on the latest unRAID DVB 6.3.2 (stock DD drivers); So I guess the question is, why would the Default/Latest TVH Docker have the problem and the older version dos not? Quote Link to comment
CHBMB Posted March 7, 2017 Share Posted March 7, 2017 2 minutes ago, meep said: So it turns out it may be TVHeadEnd after all. I reverted to the 4.09 Stable Docker (I had initially installed Default/Latest in which I had the described problem). Immediately, the tuners all showed up as I would expect: So I guess the question is, why would the Default/Latest TVH Docker have the problem and the older version dos not? I dunno, over to @saarg but I'm glad I never sent the strongly worded email to Digital Devices that I had drafted awaiting more info from you..... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.