lightsout Posted October 13, 2023 Share Posted October 13, 2023 (edited) 13 minutes ago, JonathanM said: Post your docker run command. docker run -d --name='binhex-radarr2k' --net='bridge' -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Unraid" -e HOST_CONTAINERNAME="binhex-radarr2k" -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:7878]/' -l net.unraid.docker.icon='https://raw.githubusercontent.com/binhex/docker-templates/master/binhex/images/radarr-icon.png' -p '7878:7878/tcp' -v '/mnt/user/data':'/data':'rw' -v '/mnt/user/appdata/binhex-radarr':'/config':'rw' 'binhex/arch-radarr' EDIT## Very strange but when I ran the command by changing the port and changing it back, it caused it to update. Now I am on 5.xxx, strange but I think I'm good. Edited October 13, 2023 by lightsout Quote Link to comment
jonesy Posted October 14, 2023 Share Posted October 14, 2023 (edited) My issue seems to be when I get the prompt for authentication, once I set all the details and pass, radarr doesn't take it. I click save and it'll either spin or flicker but the prompt box stays. This randomly broke for me last week. Oddly enough I setup prowlarr after I had this issue, which has the same authentication prompt, entered all the required information and saved. No issues at all, I also have sonarr which still works flawlessly. \\Update Simply deleting the config file and allowing radarr to recreate it fixed the issue for me. Once I did this the prompt for authentication worked and took my credentials upon saving. Working now Edited October 16, 2023 by jonesy 1 Quote Link to comment
Kirkbuilder Posted October 17, 2023 Share Posted October 17, 2023 On 8/2/2023 at 1:23 PM, TCMapes said: Hardlinks not working. Am I missing something for my docker setup. Do I even need the /media path? When I check to see if hardlinks are using for my share /data it is showing it is not used. All my dockers use the data share I setup using the TRaSH guide for hardlinks. Hey! Did you ever figure this one out? After updating to newest Unraid and Radarr 5.0.3.8127 I started having similar issues. I was able to get Radarr working with nzbget again - sort of, but am still having multiple issues. Radarr is continuing not see movies in some directories and so continues to download and move files to directories. For example, Radarr does not see that a copy of the movie “The way we were” is in the directory, but will download a new copy (in this example 2 copies a 720p and 1080p) and copy the files to the directory, but not update that those very files it moved to the directory are in the directory. I am seeing lots of database “locked” errors in the log, but have performed .recover operations via sqlite3 commands in the wiki and they persist. Logs: https://privatebin.net/?aa32f003bc3fde6e#8T6LZPWCmaUBRnW7GrNoQVFxsNWJddKYqndCKb7ZHCui Any assistance would be appreciated. Quote Link to comment
kaaizen Posted October 19, 2023 Share Posted October 19, 2023 (edited) binhex-radarr THE WORSE THING THEY DID WAS FORCE THE USERNAME/PASSWORD I did as it said. i put into username and password. I set it to NOT use on internal / local network. I wrote the password out in notepad the copy to it to make sure it was 100% correct. I restart server, pops up to enter password. NOW I GET THIS ERROR. NOTHIN ELSE. APP WAS FINE. THERE WAS NO BUGS. NO ERRORS AND NO ISSUES UNTILL NOW! WORSE UPDATE EVER NOW IM LOCKED OUT. THERE ISNT EVEN A WAY TO CHANGE THE PASSWORD ON THE DOCKER SETTINGS Failed to load Radarr Version 5.0.3.8127 PLEASE REMOVE THIS FEATURE AND ROLLBACK !!! Edited October 19, 2023 by kaaizen Quote Link to comment
wgstarks Posted October 19, 2023 Share Posted October 19, 2023 6 hours ago, kaaizen said: binhex-radarr THE WORSE THING THEY DID WAS FORCE THE USERNAME/PASSWORD I did as it said. i put into username and password. I set it to NOT use on internal / local network. I wrote the password out in notepad the copy to it to make sure it was 100% correct. I restart server, pops up to enter password. NOW I GET THIS ERROR. NOTHIN ELSE. APP WAS FINE. THERE WAS NO BUGS. NO ERRORS AND NO ISSUES UNTILL NOW! WORSE UPDATE EVER NOW IM LOCKED OUT. THERE ISNT EVEN A WAY TO CHANGE THE PASSWORD ON THE DOCKER SETTINGS Failed to load Radarr Version 5.0.3.8127 PLEASE REMOVE THIS FEATURE AND ROLLBACK !!! I think feature requests for the app would be best if posted in the forum for the app. https://www.reddit.com/r/radarr/ Or possibly the GitHub page. https://github.com/Radarr/Radarr 1 Quote Link to comment
JonathanM Posted October 19, 2023 Share Posted October 19, 2023 6 hours ago, kaaizen said: PLEASE REMOVE THIS FEATURE AND ROLLBACK !!! No need to shout, you can easily rollback yourself. Just use whichever previous tag you want from the list linked in the first post of this thread. https://hub.docker.com/r/binhex/arch-radarr/tags There are plenty of people using this latest version without issues, so it doesn't make sense to revert the changes for everyone, but you are free to use previous versions. 1 Quote Link to comment
David13858 Posted October 20, 2023 Share Posted October 20, 2023 I have been having some issues with the container over the past few weeks (it has been running fine for years) so I decided to give it a reinstall. I have set it up exactly the same way as before and everything works fine until I try to import existing media. I have tried the following commands but none have worked. ```docker exec -it binhex-radarr /bin/bash``` ```chown -R nobody:nobody media``` ```chmod -R 777 /media/``` When I run ls -la on the media folder every file returns drwxrwxrwx 1 nobody nobody <size> <date> <folder name> Quote Link to comment
David13858 Posted October 20, 2023 Share Posted October 20, 2023 (edited) 9 hours ago, David13858 said: I have been having some issues with the container over the past few weeks (it has been running fine for years) so I decided to give it a reinstall. I have set it up exactly the same way as before and everything works fine until I try to import existing media. I have tried the following commands but none have worked. ```docker exec -it binhex-radarr /bin/bash``` ```chown -R nobody:nobody media``` ```chmod -R 777 /media/``` When I run ls -la on the media folder every file returns drwxrwxrwx 1 nobody nobody <size> <date> <folder name> Issue has magically resolved its self... I haven't touched anything so I have no idea why it is fixed. Edited October 20, 2023 by David13858 Quote Link to comment
bmoney003 Posted November 6, 2023 Share Posted November 6, 2023 Can’t connect to any indexers or download clients all of a sudden. i get the message “check your dns settings. Make sure iv6p is working or disabled” im stumped plesse help Quote Link to comment
Silverhand77 Posted November 7, 2023 Share Posted November 7, 2023 Hi All, I just updated to the latest version of Radarr & when I refreshed the web UI I got the following pop-up: Regardless of what I enter, when I click save, nothing happens. I have changed the config file as per the below: but the pop-up still won't go away so I can't access Radarr. Any ideas or help is greatly appreciated. Thanks & kind regards 1 Quote Link to comment
Silverhand77 Posted November 8, 2023 Share Posted November 8, 2023 On 10/19/2023 at 10:00 PM, JonathanM said: No need to shout, you can easily rollback yourself. Just use whichever previous tag you want from the list linked in the first post of this thread. https://hub.docker.com/r/binhex/arch-radarr/tags There are plenty of people using this latest version without issues, so it doesn't make sense to revert the changes for everyone, but you are free to use previous versions. Can anyone please advise how to use one of these tags to roll back to a previous version of radarr? Quote Link to comment
wgstarks Posted November 8, 2023 Share Posted November 8, 2023 26 minutes ago, Silverhand77 said: Can anyone please advise how to use one of these tags to roll back to a previous version of radarr? Use the dockerhub link on the first post to view tags. Once you decide which tag you want to use just add it to the repository field in the docker container configuration in the format binhex/arch-radarr:4.6.4.7568-1-01. No spaces. Replacing the tag in this example with the one you want. Then click “Apply” at the bottom of the page. Quote Link to comment
MrLinux Posted November 8, 2023 Share Posted November 8, 2023 On 11/7/2023 at 8:21 AM, Silverhand77 said: Hi All, I just updated to the latest version of Radarr & when I refreshed the web UI I got the following pop-up: Regardless of what I enter, when I click save, nothing happens. I have changed the config file as per the below: but the pop-up still won't go away so I can't access Radarr. Any ideas or help is greatly appreciated. Thanks & kind regards Same here. Not sure what is needed to fix this. Do we need to add the username/password as a new field in the docker container settings? Quote Link to comment
MrLinux Posted November 8, 2023 Share Posted November 8, 2023 13 minutes ago, MrLinux said: Same here. Not sure what is needed to fix this. Do we need to add the username/password as a new field in the docker container settings? Found this solution Quote xenago So irritating. Luckily changing radarr's config.xml entry from <AuthenticationMethod>None</AuthenticationMethod> to <AuthenticationMethod>External</AuthenticationMethod> removes this message. Quote Link to comment
Silverhand77 Posted November 10, 2023 Share Posted November 10, 2023 On 11/9/2023 at 7:59 AM, MrLinux said: Found this solution I have changed the config file: <Config> <LogLevel>info</LogLevel> <UrlBase></UrlBase> <UpdateMechanism>External</UpdateMechanism> <BindAddress>*</BindAddress> <Port>7878</Port> <SslPort>9898</SslPort> <EnableSsl>False</EnableSsl> <LaunchBrowser>True</LaunchBrowser> <ApiKey>2724288a8d6845779614c08bcf914389</ApiKey> <AuthenticationMethod>External</AuthenticationMethod> <Branch>master</Branch> <SslCertPath></SslCertPath> <SslCertPassword></SslCertPassword> </Config> but the pop-up still appears. Any ideas? Quote Link to comment
Silverhand77 Posted November 10, 2023 Share Posted November 10, 2023 4 minutes ago, Silverhand77 said: I have changed the config file: <Config> <LogLevel>info</LogLevel> <UrlBase></UrlBase> <UpdateMechanism>External</UpdateMechanism> <BindAddress>*</BindAddress> <Port>7878</Port> <SslPort>9898</SslPort> <EnableSsl>False</EnableSsl> <LaunchBrowser>True</LaunchBrowser> <ApiKey>2724288a8d6845779614c08bcf914389</ApiKey> <AuthenticationMethod>External</AuthenticationMethod> <Branch>master</Branch> <SslCertPath></SslCertPath> <SslCertPassword></SslCertPassword> </Config> but the pop-up still appears. Any ideas? never mind. I fixed it. Thanks heaps! Quote Link to comment
bmoney003 Posted November 11, 2023 Share Posted November 11, 2023 (edited) On 11/5/2023 at 8:19 PM, bmoney003 said: Can’t connect to any indexers or download clients all of a sudden. i get the message “check your dns settings. Make sure ipv6 is working or disabled” im stumped please help Ok, so I fixed my DNS issue. Got the *arr dockers working again along with NZBget but I can't get DelugeVPN WebUI to load. I have the non-VPN docker working so must be related. Downloaded latest OVPN files from PIA and using Switzerland. Attached is the supervisord.log. Thanks in advance for any help troubleshooting. supervisord.log Edited November 11, 2023 by bmoney003 Quote Link to comment
marcuspohl Posted November 16, 2023 Share Posted November 16, 2023 (edited) I am having a problem with Radarr that I just noticed today. On the Movies tab, it no longer shows my Movies, it just says "Unable to load movies". On the Add New section, it says "You haven't added any movies yet, do you want to import some or all of your movies first?" Under the Activity tab, it says "Failed to load Queue". For History, it says "Unable to load history". Blocklist says "There was an error loading this page" and "Details - Cannot read properties of undefined (reading '180')". I have tried many of the recent suggestions in this thread since the authentication change: rolling back to the two previous versions (same effect for the next most recent version, but two versions back the whole thing stops working); I've reset the authentication by editing the config.xml file and making sure to select to disable for local addresses (multiple times); stopped and started the service; and recreated the config.xml by deleting it. When I try to import my Library again, it says "all movies in /media have been imported", but nothing shows up. I am now back on the current version and unable to fix Radarr. It does seem to still be processing and scanning for my list when I look at the bottom right corner, I can see it processing titles sometimes. In the events section, I can see messages like "Movie folder does not exist, skipping metadata image creation" and in the log I see messages like: 2023-11-15 18:05:15.3|Info|MetadataService|Movie folder does not exist, skipping metadata image creation 2023-11-15 18:10:12.6|Info|Radarr.Http.Authentication.BasicAuthenticationHandler|Basic was not authenticated. Failure message: Authorization header missing." It does seem to be authentication related, but every time I redo it, I get the same result. Recommendations? Edit - I am still able to play all my movies via Plex, they have not been moved. Edited November 16, 2023 by marcuspohl Quote Link to comment
wgstarks Posted November 16, 2023 Share Posted November 16, 2023 10 hours ago, marcuspohl said: Recommendations? I would suggest posting this in the Radarr forum. There will be many more Radarr users there. I really think this is an issue related to the app rather than the container. Quote Link to comment
marcuspohl Posted November 17, 2023 Share Posted November 17, 2023 I gave it a shot just now, but only one post with a similar issue in the last 21 days and it got no replies or solutions. Quote Link to comment
marcuspohl Posted November 18, 2023 Share Posted November 18, 2023 Issue resolved. A folder in my library had become corrupt and an xfs repair on the drive fixed it. Quote Link to comment
AngryPig Posted November 24, 2023 Share Posted November 24, 2023 (edited) For some reason Radarr is copying the completed movies to /data instead of /media - what have I broken? Edited November 24, 2023 by AngryPig Quote Link to comment
wgstarks Posted November 24, 2023 Share Posted November 24, 2023 (edited) 10 minutes ago, AngryPig said: For some reason Radarr is copying the completed movies to /data instead of /media - what have I broken? What do you have set for root folders in Radarr? Also, post your Radarr docker run command. edit: Radarr settings>Media Management>Root Folders Edited November 24, 2023 by wgstarks Quote Link to comment
AngryPig Posted November 24, 2023 Share Posted November 24, 2023 4 minutes ago, wgstarks said: What do you have set for root folders in Radarr? Also, post your Radarr docker run command. I believe /Downloads and /Media/Movies is the other if I understand root folders correctly docker run -d --name='binhex-radarr' --net='bridge' --privileged=true -e TZ="America/Los_Angeles" -e HOST_OS="Unraid" -e HOST_HOSTNAME="Redacted-NAS" -e HOST_CONTAINERNAME="binhex-radarr" -e 'UMASK'='000' -e 'PUID'='99' -e 'PGID'='100' -l net.unraid.docker.managed=dockerman -l net.unraid.docker.webui='http://[IP]:[PORT:7878]/' -l net.unraid.docker.icon='https://raw.githubusercontent.com/binhex/docker-templates/master/binhex/images/radarr-icon.png' -p '7878:7878/tcp' -v '/mnt/user/Downloads/':'/data':'rw' -v '/mnt/user/Media/Movies/':'/media':'rw' -v '/mnt/user/appdata/binhex-radarr':'/config':'rw' 'binhex/arch-radarr' 71b1153d4a636c2916dbc086683cd35b3c4ea92662630fcb7599973961f8085b Quote Link to comment
wgstarks Posted November 24, 2023 Share Posted November 24, 2023 1 hour ago, AngryPig said: I believe /Downloads and /Media/Movies is the other if I understand root folders correctly Here is what I have for root folders. Just to be sure I’m understanding your issue correctly, you’re saying that Radarr is copying your movies from your download client (/data) to your download client (/data)? How can you tell this is happening? 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.