20 minutes ago, kakburken said:

i have been running the plugin for some time now, so wasnt a fresh install. and been keeping up with updates (was on the latest when i posted the question). not sure what you mean with boot, if you mean boot of unraid or boot (i.e start) of the plugin. but i havent rebooted unraid for quite some time now (since update to 7.0.0). ran a force update all now and seems that did solve it since they are all green now. thanks!

Yes, unraid/server boot. It was several things involved which is now fixed and forced. Good to hear!

Overhaul '25 update: 2025.02.08-1936!

See main post about additional changes.

 

IMPORTANT! For current devel-testers:

This update might crash current devel installs (won't affect real upgrades later), fix:

edit file /boot/config/plugins/disklocation/settings.json

then search and replace all "nvme_used" to "endurance", or just remove "nvme_used"

 

 

Edited February 8, 20251 yr by FlamongOle

Trying the 25 development.

 

Love the hover additions and ability to format dashboard info!

And the fact that I can change color for each group and even default background color for each type. Amazing!

Great job and improvements!

 

But what does this setting do?

Allow editing of Unraid config:
No / Yes

1 hour ago, PeterHS said:

Trying the 25 development.

 

Love the hover additions and ability to format dashboard info!

And the fact that I can change color for each group and even default background color for each type. Amazing!

Great job and improvements!

 

But what does this setting do?

Allow editing of Unraid config:
No / Yes

This will allow or disallow editing of Unraid config files via this plugin. E.g. acknowledgement of all drives at once, or editing warranty dates etc. When setting this to "NO", the options are not editable via the plugin.

Overhaul '25 update: 2025.02.10-2201 RC2!

See main post about additional changes.

 

The previous warning about crashing with devel-release is now invalid. It will fallback to default if something is wrong, and it will also tell you what's wrong.

 

As this is Release Candidate 2, I would like to have a few more testers. Mostly from stable users, but also devel users. This would normally be released as stable, but I don't want to rush anything, just in case. Please go to the post below for instructions.

 

Please post here about the experience and how it went, both good and bad!

 

 

Added a Seagate HDD check in System tab due to a fraud likely caused by some miners.

• https://www.heise.de/en/news/Fraud-with-Seagate-hard-disks-Dozens-of-readers-report-suspected-cases-10259237.html
• https://www.tomshardware.com/pc-components/hdds/seagates-fraudulent-hard-drives-scandal-deepens-as-clues-point-at-chinese-chia-mining-farms
• https://www.techspot.com/news/106706-used-seagate-drives-sold-new-traced-back-crypto.html

 

Edited February 10, 20251 yr by FlamongOle

Just want to say I'm really enjoying the app and appreciate all of the hard work you have put into it.  I did have a question about temperatures, more so NVME.  I have two NVME drives that show critical at 118F which is normal operating temp.  Where are the temp ranges pulled from and are they editable?

8 minutes ago, mr2toyou said:

Just want to say I'm really enjoying the app and appreciate all of the hard work you have put into it.  I did have a question about temperatures, more so NVME.  I have two NVME drives that show critical at 118F which is normal operating temp.  Where are the temp ranges pulled from and are they editable?

Unraid disk config

@FlamongOleSo the thresholds that are configured in unraid? Just want to be looking at the correct location

8 minutes ago, mr2toyou said:

@FlamongOleSo the thresholds that are configured in unraid? Just want to be looking at the correct location

Yes, they can be individual or global. I just grab the data, nothing else for temps

9 minutes ago, mr2toyou said:

@FlamongOleSo the thresholds that are configured in unraid? Just want to be looking at the correct location

I notice you use devel, anything bugged so far, or did everything go smooth?

Got it, the default values were set from smart but those were not actually applied.  Everything is working great, no bugs or issues so far.. Thank you

I have noticed that all of my drive are under warning from the heat map, 

 

All of those temps have been set already..

I updated from 2025.02.08-1936 to 2025.02.10-2201 RC2 just now.

My DASHBOARD page is blank and TOOLS/Disk location is also blank.

 

 

EDIT: Did uninstall and reinstall plugin. Same result..

Edited February 11, 20251 yr by PeterHS

Similar to @PeterHS but I updated from the non-devel 2025.02.08 to devel 2025.02.10-2201 RC2 and I also have a blank dashboard and Tools/Disk-Location page.  Spun up the array, dashboard remained blank (appears to be different than the dashboard crash issue of 7/2023).  Cleared cache and cookies, dashboard remained blank.  Tried different browsers, dashboard remained blank   Reverted back to stable 2025.02.08 everything came back normal.  Running Unraid 7.0.0.

 

 

Edited February 11, 20251 yr by SShadow

Ah, I see the merge resolve is in the way. I'll see if I can fix it soon

Overhaul '25 update: 2025.02.11-1751 RC2

Same as previous, just git merge fixed.

 

@SShadow @PeterHS @mr2toyou

 

If this release seems fine, then the I will likely pull request it to master branch on 14.02 and release it as stable then.

2025.02.11-1751 RC2 did the trick for me.

 

All is good and back to normal.

 

EDIT: spelling..

Edited February 11, 20251 yr by PeterHS

@FlamongOle Update looks great, any thoughts on why all of my array is still showing as warning in the heat map?

@FlamongOle the update to 2025.02.11-1751 RC2 worked fine for me, thank you.  I like the changes so far especially where I can format the dashboard layout. 

 

Do you have plans on adding the parameters from the 2024 version of the plugin to 2025?  Specifically these: Spare, Percentage Used, Power On Time, Data Read, Data Written, Load Cycles, Reallocated Sector, Reported Uncorrectable, Command Timeout, Current Pending Sectors, Offline Uncorrectable.

In the 2024 version I had almost every option checked as I liked the dashboard to be like a one stop shop for all important drive info.  Where I could see everything on one page instead of having to look at the individual drives.

 

The 2024 layout on my one server server:

 

The 2025 Overhaul layout on my other server:

 

If I had all the options from 2024 to customize the layout for 2025 that would be perfect for my use case.  Keep up the great work on the plugin!

Sorry @FlamongOle just noticed a separate issue.  Looks like the dynamic LEDs in standby is not working for me on 2025.02.11-1751 RC2.  I upgraded from non-dev 2025.02.08 to 2025.02.11-1751 RC2.  I tried different browsers, cleared cache, I tried switching to static, saving, then switched back, saved but still not dynamic like in the 2024 version.  Thanks!

2 hours ago, mr2toyou said:

@FlamongOle Update looks great, any thoughts on why all of my array is still showing as warning in the heat map?

Are the temps below the warning threshold? There's two settings, warning and critical. Ideally you would be below both. The settings are adjusted in per disk settings, or globally under Settings -> Disk Settings

 

I just tested both, and they work here. Make sure the settings are adjusted correctly and report back. 

51 minutes ago, SShadow said:

Sorry @FlamongOle just noticed a separate issue.  Looks like the dynamic LEDs in standby is not working for me on 2025.02.11-1751 RC2.  I upgraded from non-dev 2025.02.08 to 2025.02.11-1751 RC2.  I tried different browsers, cleared cache, I tried switching to static, saving, then switched back, saved but still not dynamic like in the 2024 version.  Thanks!

I just tested them, they work here. But it might take up to 5 minutes before you'll see if it's in standby or not, it's background-caching. You can double check when you hover the LED if it says "device spun down" or "device is active" or something similar.

 

Server-side cache (nothing you can change)

Edited February 11, 20251 yr by FlamongOle
added info about cache

35 minutes ago, SShadow said:

@FlamongOle the update to 2025.02.11-1751 RC2 worked fine for me, thank you.  I like the changes so far especially where I can format the dashboard layout. 

 

Do you have plans on adding the parameters from the 2024 version of the plugin to 2025?  Specifically these: Spare, Percentage Used, Power On Time, Data Read, Data Written, Load Cycles, Reallocated Sector, Reported Uncorrectable, Command Timeout, Current Pending Sectors, Offline Uncorrectable.

In the 2024 version I had almost every option checked as I liked the dashboard to be like a one stop shop for all important drive info.  Where I could see everything on one page instead of having to look at the individual drives.

 

The 2024 layout on my one server server:

 

The 2025 Overhaul layout on my other server:

 

If I had all the options from 2024 to customize the layout for 2025 that would be perfect for my use case.  Keep up the great work on the plugin!

 

No, the SMART errors are now just moved in the SMART section of the plugin instead. This will make it use SMART settings defined in Unraid config. I decided to not include it this time as it's more of a clutter anyway. (these: Reallocated Sector, Reported Uncorrectable, Command Timeout, Current Pending Sectors, Offline Uncorrectable incl. whatever you might have included from Unraid config).

 

But, "nvme_used" (Percentage used) still exists, just under another tag called "endurance" which is valid for both SSD and NVMe. Power On Time still exists, but two different formats: powerontime which gives you a calculated time "4 years 3 months" etc.. and powerontime_hours which gives you raw hours. Load Cycles still exists, but not included by default (loadcycle).

Press "help" button, and entire list will show up of what you can choose per table.

2 hours ago, mr2toyou said:

@FlamongOle Update looks great, any thoughts on why all of my array is still showing as warning in the heat map?

On other hand, you use "Heat map" and not "Disk Type"? Looks like "Heat map" does not work at all. Gonna look into that.

Overhaul '25 update: 2025.02.11-2218 RC2

• Fixed "heat map" to be working again, it used an old variable. Also fixed so that N/A temp is colored as N/A.