3 minutes ago, JNP said:

It hangs on the "LOADING ASSETS" step with my whole server CPU bottled necked and almost crashing.

Can you post a screenshot from your Docker template?

Do you have a cache drive installed? If yes to what is the appdata share set in terms of use cache in the Share settings?

 

3 minutes ago, JNP said:

Is it possible the CPU is under-powered for the job (4 core / 3.6GHz)

I don't think so because my server is about 50% load when it boots up for about 10 - 20 seconds but never freezes.

Maybe your drive can't keep up and that's why it freezes, on what drive is the game on (brand)?

All appdata is stored on the cache with Preferred settings. Cache is a Kingston M.2 1TB drive with 80% capacity still available.

 

Is the below screenshot what you're looking for? Following this guide for setting recommendations (https://unraid.net/blog/project-zomboid)

 

Edited June 28, 20224 yr by JNP

16 minutes ago, JNP said:

Is the below screenshot what you're looking for? Following this guide for setting recommendations (https://unraid.net/blog/project-zomboid)

Please turn off validation, it has no benefit in your case.

 

I would like you to start over please by doing the following things:

1. Remove the container
2. Remove the projectzomboid folder from your appdata directory
3. Pull a fresh copy from the CA App and try it again without changing anything and leave it sometime to start up

@ich777 Wow that fixed it! All it took was reverted to default installation instructions. Thanks for the support!

 

Out of curiosity, what does the Validate Installation setting refer to?

17 minutes ago, JNP said:

Out of curiosity, what does the Validate Installation setting refer to?

If some files become corrupt you can validate the files like you can do it in your Steam client but if you enable this it will actually validate the files each time the container starts and will slow down the start process since it always have to check the files against the Steam servers.

11 hours ago, ich777 said:

Have you stopped the container in the first place?

Where did you put the save file exactly?

 

Can you post a screenshot from the template, if you are using /mnt/cache/appdata/... make sure that the appdata share is set to Only or Prefer in terms of use cache in the Share settings.

Container is stopped when I put the new file in the save folder. I'm putting it in the same folder (/appdata/openrct2/saves) as the docker.sv6 file that downloads with the container. My appdata share is set to Prefer.

11 hours ago, ich777 said:

Have you even read the article that I've linked first?

 

I did read it, and I was connecting exactly like this.

 

I get these when the container loads the config, I don't know why they appear twice.

 

Command 'rcon.password' not found
Command 'rcon.password' not found
Command 'batchmode' not found
Command 'batchmode' not found
Command 'server.eac' not found
Command 'server.eac' not found

 

I have the following in Game Parameters

 

+server.maxplayers 10 +server.secure 0 +server.eac 0 +server.encryption 0 +rcon.port 28016 +rcon.password ******

 

I also get the following in the RUST.log

 

Could not establish a TCP connection to <publicip>:28083
(Filename: ./Runtime/Export/Debug/Debug.bindings.h Line: 35)

 

Kicking 192.168.0.149:51004/steamid/username (Steam Status "InvalidAuthSession")
(Filename: ./Runtime/Export/Debug/Debug.bindings.h Line: 35)

 

192.168.0.149:51004/steamid/username kicked: Steam: InvalidAuthSession
Saved 96,872 ents, cache(0.04), write(0.01), disk(0.02).
(Filename: ./Runtime/Export/Debug/Debug.bindings.h Line: 35)

 

I can't seem to find any info on these errors.

12 minutes ago, SweetChinMusic said:

Container is stopped when I put the new file in the save folder. I'm putting it in the same folder (/appdata/openrct2/saves) as the docker.sv6 file that downloads with the container. My appdata share is set to Prefer.

This is really weird, I did nothing else as you did.

Maybe try a fresh container... Are there any old save files in that folder?

3 minutes ago, dGG2uA said:

+server.maxplayers 10 +server.secure 0 +server.eac 0 +server.encryption 0 +rcon.port 28016 +rcon.password ******

Then RCON must be enabled differently, but don't quote me on that.

 

I'm really not into RUST or any other game currently and as always modding is always up to the user, I only provide the base functionality from the container.

I'm also pretty confident that I've answered a question about RUST and RCON a few times but I have to search for that, also keep in mind that RUST doesn't use the default RCON protocol they use something that is called WebRCON or something similar.

2 minutes ago, ich777 said:

Then RCON must be enabled differently, but don't quote me on that.

 

I'm really not into RUST or any other game currently and as always modding is always up to the user, I only provide the base functionality from the container.

I'm also pretty confident that I've answered a question about RUST and RCON a few times but I have to search for that, also keep in mind that RUST doesn't use the default RCON protocol they use something that is called WebRCON or something similar.

Ok, I'll do some more research and if I find a fix I'll update here for anyone else looking to do this.

39 minutes ago, ich777 said:

This is really weird, I did nothing else as you did.

Maybe try a fresh container... Are there any old save files in that folder?

Nothing other than the default map file. I've tried deleting it too but it didn't help. I'll keep messing around with it and let you know if I find anything.

1 hour ago, ich777 said:

Then RCON must be enabled differently, but don't quote me on that.

 

I'm really not into RUST or any other game currently and as always modding is always up to the user, I only provide the base functionality from the container.

I'm also pretty confident that I've answered a question about RUST and RCON a few times but I have to search for that, also keep in mind that RUST doesn't use the default RCON protocol they use something that is called WebRCON or something similar.

I made some progress. I'm using these in game parameters;

 

+server.maxplayers 10 +server.secure 0 +server.encryption 0 +rcon.web 1 +rcon.port 28016 +rcon.password *****

 

Note on the rcon port - container has "eg: '+rcon.port 27016 +rcon.password YOURPASSWORD". I used 28016 as its the game port +1. I also added 28016 as a port variable in the container.

 

I also added myself as an admin through rcon and set server.eac to 0 and gave the server.writecfg command after to save it. (used http://rcon.io/)

 

Error's I get now are relating to steam:

 

(Steam Status "Invalid")

(Steam Status "InvalidAuthSession")

Still working on a fix for these.

1 hour ago, SweetChinMusic said:

Nothing other than the default map file. I've tried deleting it too but it didn't help. I'll keep messing around with it and let you know if I find anything.

I will try the other maps that you've sent over another day on my server and will keep you updated too.

23 hours ago, ich777 said:

Yes.

 

Can you describe a little more what you've did? I don't know what you exactly mean with it worked and then it stopped responding, that's simply not possible.

 

The Name from the container, the path from the game files, the ports and also the configuration from the second container to match the new ports.

Please see the first recommended post in that thread on top for Valheim it's basically the same except for the port in the Show more section.

So I had done all of this, but interestingly, the only way I could get it working was by setting   "ListOnMasterServer": true on only one of the instances. If it was true on both, joining the server would either fail to load, or would join the wrong server when using the "Continue" menu in game.

 

Works now though!

I'm having issues with installing Arma 3 on a docker container to host a server, I've added my username and password, opened the ports in the config on my router, this appears to be the last section in the log from what I can see before the logs window closes itself, i think at least anyway, i can try and grab more of the logs before it crashes if needs. Im not sure what to do so could anyone give me some advise?  I also have a video recording of the logs as it runs before it crashes
 

15:49:57 InitSound ...
15:49:57 InitSound - complete
15:49:57 PhysX3 SDK Init started ...
15:49:57 PhysX3 SDK Init ended.
15:49:59 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.\na3_characters_f
15:49:59 Loading movesType CfgGesturesMale
15:49:59 MovesType CfgGesturesMale load time 53.0 ms
15:49:59 Loading movesType CfgMovesMaleSdr
15:50:03 Warning: looped for animation: a3\anims_f_epa\data\anim\sdr\cts\hubcleaned\briefing\hubbriefing_loop.rtm differs (looped now 0)! MoveName: hubbriefing_ext
15:50:04 Warning: looped for animation: a3\anims_f_epa\data\anim\sdr\cts\hubcleaned\spectator\hubspectator_stand.rtm differs (looped now 1)! MoveName: hubspectator_stand_contact
15:50:04 MovesType CfgMovesMaleSdr load time 4220.0 ms
CApplicationManagerPopulateThread took 0 milliseconds to initialize (will have waited on CAppInfoCacheReadFromDiskThread)
CAppInfoCacheReadFromDiskThread took 4 milliseconds to initialize
RecordSteamInterfaceCreation (PID 68): SteamGameServer012 / GameServer
RecordSteamInterfaceCreation (PID 68): SteamUtils009 / Utils
Setting breakpad minidump AppID = 107410
15:50:04 Initializing Steam server - Game Port: 2302, Steam Query Port: 2303
RecordSteamInterfaceCreation (PID 68): SteamGameServer012 / GameServer
RecordSteamInterfaceCreation (PID 68): SteamUtils009 / Utils
RecordSteamInterfaceCreation (PID 68): SteamNetworking005 / Networking
RecordSteamInterfaceCreation (PID 68): SteamGameServerStats001 / GameServerStats
RecordSteamInterfaceCreation (PID 68): STEAMHTTP_INTERFACE_VERSION002 / HTTP
RecordSteamInterfaceCreation (PID 68): STEAMINVENTORY_INTERFACE_V002 / Inventory
RecordSteamInterfaceCreation (PID 68): STEAMUGC_INTERFACE_VERSION010 / UGC
RecordSteamInterfaceCreation (PID 68): STEAMAPPS_INTERFACE_VERSION008 / Apps
/opt/scripts/start-server.sh: line 63:    68 Segmentation fault      ./arma3server_x64 ${GAME_PARAMS}
15:49:57 Dedicated host created.
15:50:04 BattlEye Server: Initialized (v1.217)
15:50:04 Game Port: 2302, Steam Query Port: 2303

 

Edited June 28, 20224 yr by Kazak-PG
addition of video

7 hours ago, Kazak-PG said:

Arma 3

Please try to create a variable in the template with the following contents and see if it fixes the issue:

 

 

On what Unraid version are you, if you are not on 6.10.3 I would recommend that you upgrade first and then try it again.

19 hours ago, ich777 said:

Modding is always up to the user, I also don't play ARK so I really can't help with this.

 

Have you seen the second recommended post on top of this thread from @Cyd which has made a excellent write up on how to create a cluster?

 

I did it now!

Thank you very much for you´r help and thanks to @Cyd for that post!

3 hours ago, ich777 said:

Please try to create a variable in the template with the following contents and see if it fixes the issue:

 

 

On what Unraid version are you, if you are not on 6.10.3 I would recommend that you upgrade first and then try it again.

Ok will give that a go, im on that version as well

 

===============
 2:20:04 modsReadOnly = true
 2:20:04 safeModsActivated = false
 2:20:04 customMods = false
 2:20:04 hash = '60553D404402468A1D2B383E1CDDE67BBD3FA0E9'
 2:20:04 hashShort = 'c8ea65ac'
 2:20:04                                               name |               modDir |    default |   official |               origin |                                     hash | hashShort | fullPath
 2:20:04 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 2:20:04                                  Arma 3 Art of War |                  aow |       true |       true |             GAME DIR | 149e4c4c41345f559ba55c9bdf193cacb53bc859 |  f5dda9af | /serverdata/serverfiles/aow
 2:20:04                          Arma 3 Contact (Platform) |                enoch |       true |       true |             GAME DIR | b4acf58bbcc74306cf3e16d18dd9d1104ec18e31 |  98b4320d | /serverdata/serverfiles/enoch
 2:20:04                                       Arma 3 Tanks |                 tank |       true |       true |             GAME DIR | b0e1db8e52f6d8fd49b0d26dd66928f09ba0b94e |  a003f7c0 | /serverdata/serverfiles/tank
 2:20:04                                     Arma 3 Tac-Ops |               tacops |       true |       true |             GAME DIR | ea3cdf2272cdac419425e594f1a08780df19ae55 |   1fb7009 | /serverdata/serverfiles/tacops
 2:20:04                                 Arma 3 Laws of War |               orange |       true |       true |             GAME DIR | 8ef9975ebc6f24e5194944d3ba0b0fd773f5d03f |  9ec21f31 | /serverdata/serverfiles/orange
 2:20:04                                      Arma 3 Malden |                 argo |       true |       true |             GAME DIR | 4099df70f3b7a41354fa7b1c08a312b6501cd9a4 |  56e7d619 | /serverdata/serverfiles/argo
 2:20:04                                        Arma 3 Jets |                 jets |       true |       true |             GAME DIR | 8d72a046ce82fb8211a2a6b8cbe143222f1a79c0 |  923f8a63 | /serverdata/serverfiles/jets
 2:20:04                                        Arma 3 Apex |            expansion |       true |       true |             GAME DIR | d5db51dc74c18501267ac28ea9150b7781bd2a7c |  ca0d2721 | /serverdata/serverfiles/expansion
 2:20:04                                    Arma 3 Marksmen |                 mark |       true |       true |             GAME DIR | c550a36b7cae4d8c2c91e26b66ef7083dffc5f3b |  20c71afc | /serverdata/serverfiles/mark
 2:20:04                                 Arma 3 Helicopters |                 heli |       true |       true |             GAME DIR | 4fb168d3dadb3aedc6754a182ca89de2d37b3b3b |  7bb134af | /serverdata/serverfiles/heli
 2:20:04                                       Arma 3 Karts |                 kart |       true |       true |             GAME DIR | df3db4c8eb8d771c8bc5f6da2658e27db116c27b |  3ae8d985 | /serverdata/serverfiles/kart
 2:20:04                                        Arma 3 Zeus |              curator |       true |       true |             GAME DIR | a763c29776a6f98aeecd3d3b4f7c277c4d13ae5d |  f3dc8b55 | /serverdata/serverfiles/curator
 2:20:04                                             Arma 3 |                   A3 |       true |       true |    NOT FOUND (Empty) |                                          |           | 
 2:20:04 ==========================================================================================================================================================================================================
 2:20:04 InitSound ...
 2:20:04 InitSound - complete
 2:20:04 Dedicated host created.
 2:20:04 PhysX3 SDK Init started ...
 2:20:04 PhysX3 SDK Init ended.
 2:20:07 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.\na3_characters_f
 2:20:07 Loading movesType CfgGesturesMale
 2:20:07 MovesType CfgGesturesMale load time 54.0 ms
 2:20:07 Loading movesType CfgMovesMaleSdr
 2:20:11 Warning: looped for animation: a3\anims_f_epa\data\anim\sdr\cts\hubcleaned\briefing\hubbriefing_loop.rtm differs (looped now 0)! MoveName: hubbriefing_ext
 2:20:13 Warning: looped for animation: a3\anims_f_epa\data\anim\sdr\cts\hubcleaned\spectator\hubspectator_stand.rtm differs (looped now 1)! MoveName: hubspectator_stand_contact
 2:20:13 MovesType CfgMovesMaleSdr load time 5827.0 ms
 2:20:13 BattlEye server updated to version: 217
 2:20:13 BattlEye Server: Initialized (v1.217)
CAppInfoCacheReadFromDiskThread took 4 milliseconds to initialize
Setting breakpad minidump AppID = 107410
 2:20:13 Initializing Steam server - Game Port: 2302, Steam Query Port: 2303
 2:20:13 Game Port: 2302, Steam Query Port: 2303
Arma 3 Console version 2.08.149102 x86 : port 2302
 2:20:13 Host identity created.
 2:20:13 Connected to Steam server

This is the response now, theres no crashing of the logs so i can finally read it, is it okay in that table of hashs that Arma 3 cannot be found?

1 hour ago, Kazak-PG said:

This is the response now, theres no crashing of the logs so i can finally read it, is it okay in that table of hashs that Arma 3 cannot be found?

This is pretty normal from what I know and you should now be able to connect.

Just now, ich777 said:

This is pretty normal from what I know and you should now be able to connect.

Much love! That all works now Is there any statements about what requirements it takes for a arma 3 server to run? Its mainly just guna be me and 4 friends, but i just was wondering what reqs this game would have for hosting a server

I have a  i5 10600k and 32GB of ram

58 minutes ago, Kazak-PG said:

but i just was wondering what reqs this game

You'll find them here: Click

17 hours ago, ich777 said:

Then RCON must be enabled differently, but don't quote me on that.

 

I'm really not into RUST or any other game currently and as always modding is always up to the user, I only provide the base functionality from the container.

I'm also pretty confident that I've answered a question about RUST and RCON a few times but I have to search for that, also keep in mind that RUST doesn't use the default RCON protocol they use something that is called WebRCON or something similar.

I got everything working.

 

Game Parameters - +server.maxplayers 10 +rcon.web 1 +rcon.port 28016 +rcon.password ******

 

I added the following to /mnt/user/appdata/rust/server/my_server_identity/cfg/serverauto.cfg

 

server.eac "0"
server.secure "False"
server.encryption "0"

 

I access RCON through http://rcon.io/console.

 

You might want to update the container with some details about rcon? You need +rcon.web, +rcon.port and +rcon.password to get it working.

 

I can join from the console (F1) from the main menu with client.connect 192.168.0.65:28015 or mydomain.xyz:28015 (with port forwarding set up). It also shows up on BattleMetrics but since no EAC i don't think it will stay up there for long.

 

Hope this helps anyone else trying to achieve the same thing (self hosting a Rust game server, and playing from Linux with proton) in the future.

 

See also - https://www.protondb.com/app/252490

1 hour ago, ich777 said:

You'll find them here: Click

Cool more then enough  

Is there any attempts been made to install mods on the container that you know of? Just trying to look for some guides, and can see some for other images/containers but nothing concrete for this one

4 minutes ago, Kazak-PG said:

Is there any attempts been made to install mods on the container that you know of? Just trying to look for some guides, and can see some for other images/containers but nothing concrete for this one

I've only created the Exile mod Arma3 container, but it should be possible.

This container is just like you run it on bare metal, nothing different.

1 minute ago, ich777 said:

I've only created the Exile mod Arma3 container, but it should be possible.

This container is just like you run it on bare metal, nothing different.

Oh okay, ill do it like normal then, thank you I did see a conversation you had with someone a while back called john about this, so ive dropped them a message just to confirm the steps, hopefully they get back to me