February 25, 20215 yr 1 hour ago, L0rdRaiden said: Yes Could it be because of this? --cap-add=SYS_RAWIO I have no idea to be honest, but might be one of the --cap-add or privileged doing it.
March 23, 20215 yr On 1/25/2021 at 12:06 PM, viola2572 said: how do I refresh it?????? as it is showing me data from drives a day old, I have uninstalled it and reinstalled it, still old data. I know it does it one a day, but when you have been changing drives, you want a refresh button, please Also it is seeing my WD SAS 3tb and 4tb drives as seagate Parity 2ST4000NM0023_Z1Z0C3DW - 4 TB (sdo)32 C1,216,397163,6080Disk 1ST33000650SS_Z293MTCQ - 3 TB (sdc)25 Same. I replaced a drive and reran the command line command, restarted the docker, etc, but still has the old data.
April 27, 20215 yr When I run the command - scrutiny-collector-metrics run - I get the following errors see below. The data is showing up in the web portal, but I'm wondering why those errors are showing. INFO[0000] Executing command: smartctl --info -j /dev/sdd type=metrics INFO[0000] Generating WWN type=metrics INFO[0000] Executing command: smartctl --info -j /dev/sde type=metrics INFO[0000] Generating WWN type=metrics INFO[0000] Executing command: smartctl --info -j /dev/sdf type=metrics INFO[0000] Generating WWN type=metrics INFO[0000] Executing command: smartctl --info -j -d nvme /dev/nvme0 type=metrics INFO[0000] Using WWN Fallback type=metrics INFO[0000] Executing command: smartctl --info -j /dev/sdb type=metrics INFO[0000] Generating WWN type=metrics INFO[0000] Executing command: smartctl --info -j /dev/sdc type=metrics INFO[0000] Generating WWN type=metrics INFO[0000] Sending detected devices to API, for filtering & validation type=metrics INFO[0000] Collecting smartctl results for sdd type=metrics INFO[0000] Executing command: smartctl -x -j /dev/sdd type=metrics ERRO[0000] smartctl returned an error code (4) while processing sdd type=metrics ERRO[0000] smartctl detected a checksum error type=metrics INFO[0000] Publishing smartctl results for 0x5000c5006e098b8f type=metrics INFO[0000] Collecting smartctl results for sde type=metrics INFO[0000] Executing command: smartctl -x -j /dev/sde type=metrics ERRO[0001] smartctl returned an error code (4) while processing sde type=metrics ERRO[0001] smartctl detected a checksum error type=metrics INFO[0001] Publishing smartctl results for 0x50014ee20a4ab910 type=metrics INFO[0001] Collecting smartctl results for sdf type=metrics INFO[0001] Executing command: smartctl -x -j /dev/sdf type=metrics ERRO[0001] smartctl returned an error code (68) while processing sdf type=metrics ERRO[0001] smartctl detected a checksum error type=metrics INFO[0001] Publishing smartctl results for 0x50014ee25f9a29db type=metrics INFO[0001] Collecting smartctl results for nvme0 type=metrics INFO[0001] Executing command: smartctl -x -j -d nvme /dev/nvme0 type=metrics INFO[0001] Publishing smartctl results for 7fbc071205d900060942 type=metrics INFO[0001] Collecting smartctl results for sdb type=metrics INFO[0001] Executing command: smartctl -x -j /dev/sdb type=metrics INFO[0003] Publishing smartctl results for 0x5000c50066215c45 type=metrics INFO[0003] Collecting smartctl results for sdc type=metrics INFO[0003] Executing command: smartctl -x -j /dev/sdc type=metrics INFO[0004] Publishing smartctl results for 0x5000c500c8f1320e type=metrics INFO[0004] Main: Completed type=metrics
April 27, 20215 yr I need help deciphering what these attributes mean in scrutiny. I purchased two Seagate EXOS 8TB hard drives and one (my parity drive) shows failed Read Error Rate. Is this a comparison of data between my drive and Backblaze or is this actually failing? My smart reports all say PASSED. Given that this is my parity drive I would like to know before something really bad happens.
May 24, 20215 yr Just installed this and when I try to run the command scrutiny-collector-metrics run in the Scrutiny console I get: command not found Am I doing something wrong?
May 29, 20215 yr The main page shows everything to look good: everything is green and says passed. I have to actually open each one to see any signs of problems -- such as a failed Reallocated Sectors Count. Is that expected behavior? Seems like those failures and warnings should be out in front.
July 15, 20214 yr is there a way to schedule when it runs? am aware of the interval setting; but i would rather have a specific time (rather than just an offset) so it would run a short while after the mover. currently its spinning up my disks in awkward times.
August 2, 20214 yr Hello, I have a problem with my scrutiny in docker, it recognizes my seagate disks and my nvme and WD disk.but the S.M.M.A.RT is failed for this last (WD) Has anyone already had this problem or has a solution. I am not unraid but with a synology (dsm) but I don't think that's a problem.
October 10, 20214 yr Hello. App won't update the harddrives in my array even with the run command in the docker console. Still has 2 older harddrives showing that I removed.
October 30, 20214 yr The only thing I changed was the webui port and it's not picking up all of my drives. Any ideas to try? I tried adding each /dev/sd(x), I gained two additional drives but none of the others.
November 4, 20214 yr How do I get the container to show all my drives? I followed the instruction to add '/dev:/dev' to the field '/dev/sda' however it reports server error when I try to start the container. Also adding `--cap-add=SYS_ADMIN` for the NVME drive results in server error. Edited November 4, 20214 yr by darrenyorston Updated
November 10, 20214 yr Anyone able to explain how to get the container to see all the drives on my system? At the moment it will only show the two in the /dev/sda and /dev/sdb fields. Nor will it show my NVMe drives.
November 10, 20214 yr 13 hours ago, darrenyorston said: Anyone able to explain how to get the container to see all the drives on my system? At the moment it will only show the two in the /dev/sda and /dev/sdb fields. Nor will it show my NVMe drives. I have the same question. Any guidance would be much apprciated!
November 24, 20214 yr Hello all. Following up on a previous post re Scrutiny. How do you get it to show all the drives in the array? Mine only shows three, though one popped up after a week or so of running. My config has /dev/sda, /dev/sdb, /dev/nvme1n1, and /dev/nvme2n1 in the template but when I start the UI /dev/sdb, /dev/sdh, and /dev/sdi are displayed. Is there another config somewhere I have to change to have it show all 11 drives?
November 29, 20214 yr On 11/24/2021 at 11:32 AM, darrenyorston said: Hello all. Following up on a previous post re Scrutiny. How do you get it to show all the drives in the array? Mine only shows three, though one popped up after a week or so of running. My config has /dev/sda, /dev/sdb, /dev/nvme1n1, and /dev/nvme2n1 in the template but when I start the UI /dev/sdb, /dev/sdh, and /dev/sdi are displayed. Is there another config somewhere I have to change to have it show all 11 drives? I ended up solving the issue of drives not chowing up. I edited the scrutiny.yaml file in appdata. There is a field called "disks:" I added all my drives and they showed up straight away in the UI. I dont know why but editing the drives in the docker template makes no difference to. The UI always shows what's in the .yaml file.
December 1, 20214 yr I can't change any settings in scrutiny via the webapp. All the options like trying to get manufacturer info is grayed out. It's also not really registering errors in a real way. One of my drives should be failing but scrutiny says it passes.
December 20, 20214 yr Can someone tell me if the Scrutiny container is impacted by the Log4j vulnerability?
February 10, 20224 yr On 10/27/2020 at 11:11 AM, AnalogJ said: Currently there's no way to delete old drives. It's on my to-do list. It's not updating powered on data for your new drives? By default the collector runs once a day, so after 24h you should see a change to that number. If it doesn't can you open an issue on the Github (with logs)? https://github.com/AnalogJ/scrutiny/ Has the ability to remove old drives been added yet or am I missing it?
May 10, 20224 yr The newest release 4.1 and 4.0 added influxdb among other changes and the container template on the community applications page needs to be updated accordingly. You can change the repository field to "lscr.io/linuxserver/scrutiny:8e34ef8d-ls35" until it gets updated.
May 12, 20224 yr On 5/10/2022 at 5:54 AM, EML said: The newest release 4.1 and 4.0 added influxdb among other changes and the container template on the community applications page needs to be updated accordingly. You can change the repository field to "lscr.io/linuxserver/scrutiny:8e34ef8d-ls35" until it gets updated. Thanks, that fixed things for me.
May 29, 20224 yr On 5/24/2021 at 2:12 PM, ashman70 said: Just installed this and when I try to run the command scrutiny-collector-metrics run in the Scrutiny console I get: command not found Am I doing something wrong? Did you figure this one out? I have tried switching from Bash to Shell and either way it doesn't like the command.
June 8, 20224 yr I've installed this app because Hotio scrutiny is not supported anymore. Only now everytime I start this dockerI need to manually put in: scrutiny-collector-metrics run Otherwise it won't start. With Hotios version this was not needed. It would start automatically. Is it possible to also possible for this docker to automatically start without putting in the command? Edited June 8, 20224 yr by de Techneut
June 13, 20224 yr On 6/8/2022 at 10:17 AM, de Techneut said: I've installed this app because Hotio scrutiny is not supported anymore. Only now everytime I start this dockerI need to manually put in: scrutiny-collector-metrics run Otherwise it won't start. With Hotios version this was not needed. It would start automatically. Is it possible to also possible for this docker to automatically start without putting in the command? Just a heads up, looks like the linux server image is deprecated as well now. From the github page: ---------------------------- This image is deprecated. We will not offer support for this image and it will not be updated. We recommend the official images: https://github.com/AnalogJ/scrutiny#docker ---------------------------- The AnalogJ image is available through CA, using that without any problems
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.