Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Hi there, I'm running Unraid 7.0.0 on a Ryzen 5 4600G. When I first installed, I installed Dynamic System Temperature and it detected drivers automatically. I could see CPU and mainboard temperatures, among others. At some point, after a restart or two, all temperatures have disappeared. Now, I go into the plugin, click "detect," and it returns no results. I can run sensors-detect, but that returns the same result. I have reseated the CPU fan heade
- Closed
- 1647 views
-
I replaced the cache drive with a bigger drive and the tried to move the shares back to the cache from the array. It will not do it. Docker and VM are disabled. thor-diagnostics-20250112_1225.zip
- Minor
- 6871 views
-
Hello, after upgrading to unraid 7.0.0 every 1-2 days (sometimes hours) i will lose access to GUI, containers will stop working, and i will not be able to access through SSH. only a hard dirty reset will bring my unraid back. I went through the reports in the forums and I've seen others reporting similar issues so I turned on my syslog server and included the log in attachments along with diagnostics. i believe the issue is shown in the log around this time st
- Urgent
- 789 views
-
Hello, I'm running Unraid 6.12.14 with no issues other than all the plugins saying they are "not available." This means I cannot upgrade to the next version because all the plugins need to on their latest version first. I know this has happened in the past but I cannot seem to locate a solution and it doesn't seem to be happening to a lot of people. Included is the diagnostics from my system. Thanks, Scott unraid2-diagnostics-20250126-11
- Closed
- 497 views
-
So I just updated to Unraid 7 from 6.12.11 and it seems to have broken my subnet routing with tailscale. It seems I can still ping the devices across the tailscale subnet route, but can't access any services there like I was in 6.12. 2 things I have noticed that cause this problem. If I disable the docker service and/or disable "Host access to custom networks" the subnets are still accessible but then host access is lost to dockers (which is a problem for me). Secondarily, If i leave
- Urgent
- 2917 views
-
Pinning CPU resources to specific Docker containers using /Dashboard/Settings/CPUset url fails when a Docker compose stack is running. I tried this with and without cpuset: '16,17,18,19' within the Compose file, but on both occassions I get a 500 Internal Server Error. An example of the Compose file: services: youtube-dl-ph: image: jeeaaasustest/youtube-dl container_name: youtube-dl restart: always cpuset: '12,13,14,15' ports: - 9999:80 environment:
- Minor
- 2676 views
-
Hi, today is installed the new Limetech Patch-Plugin on my Unraid 7.0.0 machine. Afterwards I had to do a reboot and since that reboot I can not access my WebUI anymore. What I get is "502 Bad Gateway / openresty". SSH works fine. I have NGING-Proxy Manager up and running, so I had to change my default ports to 88 and 444. All Docker Containers, VM, Shares are fully functional. I tried to change the IP address but it doesn't change a thing. I also tried a port scan
- Minor
- 642 views
-
Hi, I updated the system from version 6.12.14 to 7.0.0. Everything worked perfectly before the update, and I didn't make any changes to the system or the hardware. However, after the update, the web UI randomly goes into a "not responding" state after running for a while. All services, including Docker and VMs, become unresponsive as well. I can still ping the server and access it locally by plugging in a keyboard, and I can run commands, except for "htop" and "ps". If I was on the Das
- Urgent
- 8096 views
-
I've been having this issue for the past while and finally making a post on it. This is what I am doing and this is what I observe: There will be cases when Unraid is low on free memory such as spinning up a VM copying a lot of files from VM to host via SFTP which caches files in RAM Docker containers temporarily needing to use a lot of RAM for certain operations In these cases, when Unraid reaches this "close to out of memory" scenario
- Solved
- Minor
- 1735 views
-
Hello there, I installed Unraid 6.12.15 today and noticed that some of my files where missing. After looking into this, I found out that one of my drives was not mountable because an Unsupported filesystem. The now unmountalbe drive is the Disk 2. For context: last week my Disk 1 failed and the content was and still is emulated (a replacement disk is in shipping and I wasn't that concerned because of the dual parity factor). That is now a new situation.. As far as I know, I am still
- Solved
- Urgent
- 243 views
-
I think theres an bug when chosing included/excluded discs. They have no drop-down menu. It appeared when removing a disk that where excluded. I've tried restarting. It is now stuck on excluding a disk I no longer have. itxserver-diagnostics-20250123-1753.zip
- Minor
- 312 views
-
Upon updating to the newest full release the server is only accessible when viewing server on connected monitor. Within 10 minutes of shutting down the connected monitor the server is not able to be accessed through any form or function. The server requires a manual reboot while viewing on connected monitor to be accessed again. I am downgrading the OS to see if this fixes the issue for the time being. Any concerns or corrections after you look over the diagnostics would be of great appreciation
- Urgent
- 152 views
-
Nach dem neustart von Unraid können meine VM#s nicht mehr Starten! nas-syslog-20250126-0339.zip
- Minor
- 149 views
-
I recently upgraded to version 7 and after the reboot all drives were no longer recognized and were listed as unassigned with and arbitrary identity i.e. micron drive abcdef12345 tower-diagnostics-20250118_1525.zip
- Closed
- 1518 views
-
Without changing any configuration, my reverse proxy does not work. There is no error in the swag logs. and the Dns seems to be working I use custom network for all the dockers except adguard home where i use br0 (due to the ports used) Could you please help me where to look? Many thanks, blackbox-diagnostics-20250125_0910.zip
- Annoyance
- 514 views
-
after removing nerdtools and updating to 7.0.0. upgrade went well. but when searching for my usual nerdtool plugins (screen, python, ipmitool, etc) to install, all went well except ipmitool ipmitool installed, but terminal command line ipmitool is not to be found i need it to control fan speeds on my dell r510 + r610 i also tried freeipmi install from url, it did not work as well i also tried installing idrac-dell-fan-control and that did not work as well so i
- Closed
- 2371 views
-
recently i update to the lastest version because the community app was no longer supported in that version but now i just getting repeated crashes and i have no idea what could be causing it some things of note that i've seen is this error in the logs Nov 3 21:34:03 Tower sshd[1857]: Received signal 15; terminating. that i think is the cmd crashing the server and this one as well Nov 3 21:33:50 Tower kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.
- Closed
- Urgent
- 555 views
-
multiple shares drop randomly. issue started after upgrading to UNRaid 7 Ive attached my diagnostics. Im not sure where to start to try and find what's causing it. cosmo-diagnostics-20250120_1329.zip
- Urgent
- 303 views
-
Recently my server has started to display a 502 gateway error when I try to access it by IP occasionally. I can still access the server cli by accessing the physical server and when i run the diagnostic command i get a bus error. It is fixed by restarting but its happened 2 times this week and is supper annoying to deal with.
- Minor
- 153 views
-
Seems to be specific to this board and it's latest bios: ASRock Z170 OC Formula American Megatrends Inc., Version P7.60 BIOS dated: Friday, 03/02/2018 Users with that board will not be able to flash or upgrade to OS 7.0.0. Ticket #6747 and as mentioned in this thread: A system can only boot if disabling the microcode (dis_ucode_ldr) to the syslinux.cfg file. Previous versions of UnRaid were not affected. It's been stated that the issue is with the kernel uses in OS 7.0.0 (6.6.68
- Minor
- 204 views
-
I noticed that on unraid 7.0.0 when mover runs with logging enabled there is a bit of log spam with the init_debugging lines which I do not recall before.. can this entry be removed as it does not serve any value to users. Jan 17 16:21:11 husky emhttpd: shcmd (4537947): /usr/local/sbin/mover start |& logger -t move & Jan 17 16:21:11 husky move: Log Level: 1 Jan 17 16:21:11 husky move: mover: started Jan 17 16:21:11 husky move: init_debugging: 1 Jan 17 16:21:15 husky move: move: /mnt/c
- Closed
- 326 views
-
I'm having this strange issue where the GUI and SSH stop becoming accessible after a day or two. However, all containers seem to be working fine and can be accessed normally. All docker networks also seem to break, and the containers can only communicate with each other by IP and port. A restart fixes the issue but it always occurs again. aria-diagnostics-20250121_2344.zip
- Urgent
- 234 views
-
After upgrading to Unraid 7 my HAOS VM no longer boots with a UEFI error (see screenshot). The file exists and was working fine until the upgrade. I have tried recreating the VM with no effect. My VM config is below: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>HAOS</name> <uuid>67f72c55-cc41-58c2-1c47-6e1d88e191df</uuid> <metadata> <vmtemplate xmlns="unraid" name="Linux" icon="linux.png" os="
- Annoyance
- 524 views
-
When attempting to erase cache drive on 6.12.14, it tells me to type .htmlspecialchars(<nameofdrive>). You only have to type <nameofdrive>. Image attached shows drive name as 'c' because I was experimenting and couldn't understand why I couldn't erase the cache drive when named as 'cache'. eventually got it to work when i typed the name of the drive alone.
- Retest
- Minor
- 853 views
-
Prior updating to 6.12-beta11 or so, my average idle draw according to my UPS was in the region of 30W. After updating to 6.12-beta 11 and then 6.12.1, this increased to 40W. Downgrading back to 6.11.5 again, back to 30W. (The UPS recording has been validated against an external power meter which also shows an increase in idle power). Nothing else changed on the server otherwise. Checked that all ASPM things were the same, restarted multiple times,
- Annoyance
- 3272 views
