Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
My main tab currently looks like this My log is filling up w/ the following, which on cursory glance appears to be related. Feb 7 10:56:24 Corezilla nginx: 2025/02/07 10:56:24 [crit] 19565#19565: ngx_slab_alloc() failed: no memory Feb 7 10:56:24 Corezilla nginx: 2025/02/07 10:56:24 [error] 19565#19565: shpool alloc failed Feb 7 10:56:24 Corezilla nginx: 2025/02/07 10:56:24 [error] 19565#19565: nchan: Out of shared memory while allocating message of size 11533
- Minor
- 336 views
-
Unraid version: 6.11.1 Like the picture,unraid has run 1day 3hour and I noticed this issue.And this is not the first it happend. I have few docker containers and 2 virtual machine running. Here is the log: Apr 13 11:59:01 Tower winbindd[2562]: open_internal_samr_conn: Could not connect to samr pipe: NT_STATUS_CONNECTION_DISCONNECTED Apr 13 12:05:11 Tower winbindd[2562]: [2023/04/13 12:05:11.704069, 0] ../../source3/winbindd/winbindd_samr.c:111(open_internal_lsa_conn) Apr 1
- Minor
- 2569 views
-
When attempting to pass through the 8111 network interface (Realtek RTL8111) to a virtual machine running on Unraid, the VM fails to start and QEMU throws an assertion failure related to PCI IRQ handling: internal error: QEMU unexpectedly closed the monitor (vm='openwrt'): qxl_send_events: spice-server bug: guest stopped, ignoring qemu-system-x86_64: ../hw/pci/pci.c:1633: pci_irq_handler: Assertion 0 <= irq_num && irq_num < PCI_NUM_PINS' failed. Steps to Reproduce: C
- Urgent
- 3929 views
-
The Dashboard is displayed at 100%. There are blank areas on the Docker page. If you adjust the browser zoom level to 90% or other ratios, it may display correctly occasionally. My monitor is 27 inches with a 2K resolution, and I have also installed the Docker folder plugin. I'm not sure what is causing this issue. 100%： 90%: 110%: 125%:
- Closed
- 292 views
-
Hello I just created a new VM in vmware ESXI 8 with the nvme controller. It seems UNRAID reports back a crazy high temperature in the dashboard. I think it must be wrong otherwise the thing would have melted. UNRAID 7.0
- Closed
- 277 views
-
Hi all, i upgraded to 7.0.0 stable and since there i got a lot of troubles. Network disconnects and system crashes. (i tried with and without realtek drivers) i got this screenshot from my log after last troubles... Diagnostics: unraid-diagnostics-20250113-2009.zip.crdownload best regards s3ppo
- Solved
- Urgent
- 743 views
-
Hi, I just notice that after I upgraded to version 7. And removed my Array disk(SSD) and moved them to Pool Device, I still have the "Spin down" mark. The "Spin down" functions should only be available on normal spin disks?
- Solved
- Minor
- 424 views
-
Unraid local webui keeps logging out like clockwork. You will be using the local display and then you get logged out. unraid-diagnostics-20250120-2329.zip
- Annoyance
- 803 views
-
After upgrading from 6.12.10 to 6.12.11 I found I had two issues: 1. This error spewing in my syslog after a while: Jul 20 16:55:11 unraid nginx: 2024/07/20 16:55:11 [alert] 12022#12022: worker process 671 exited on signal 6 Jul 20 16:55:12 unraid nginx: 2024/07/20 16:55:12 [alert] 12022#12022: worker process 738 exited on signal 6 Jul 20 16:55:13 unraid nginx: 2024/07/20 16:55:13 [alert] 12022#12022: worker process 790 exited on signal 6 Jul 20 16:55:14 unraid nginx: 2024/
- Minor
- 2561 views
-
After an upgrade to v.7 my cache pool started to break apart and put together sporadically causing all kind of issues including web UI dropping while logged in.
- Closed
- 1251 views
-
Hi, Today I added a Docker Container that is on a custom Container Registry and not on DockerHub. The Registry is a Gitlab Registry hosted by my University. I've added the login credentials via the CLI and it worked without problems. I could add the Docker Container in the GUI and Unraid pulled and started it (almost) normally. I immediately noticed that on the Docker Page that for the container it showed "not available" for the version. So I made an update to th
- Solved
- Minor
- 1913 views
-
Hello! Every first of the month the parity check is performed on my server. I have noticed that the duration displayed in the notification is not correct. Result: 14h22m Expected: 12h56m Unraid is set to UTC which is currently -1 hour from my location Thanks! Alex server-diagnostics-20250201-1301.zip
- Minor
- 373 views
-
I posted a thread about it in General Support a few days ago, but didn't get any replies. Since then, I've collected some more info, and discovered specific ways to reproduce the problem. So, here's what's going on: I have a tunnel set up in VPN Manager that's of type "VPN tunneled access for docker", and it's called wg0 It's the only VPN tunnel set up in Unraid. No others exist either in VPN Manager, or in any Docker containers I have several containers set up speci
- Minor
- 1616 views
-
Hello, I have a problem with rsync and would like to describe how it behaves: I have connected my Synology NAS to Unraid via "Unassigned Disks" using SMB and occasionally back up my data there. After approximately 1.5 to 2 hours, Unraid completely freezes. I can no longer access any of my Docker containers, shares, or the web GUI. However, Grafana still manages to capture some data. The red line in Grafana shows that from the moment the CPU reaches 100% usage, there
- Minor
- 835 views
-
hi all, It seems that after updating to 7.0.0 i've been unable to modify any thing located in the array, but files on the cache are fine. i attempted to do a fix permissions and manually set permissions but it had no effect. I was unable to even make a new share via the webgui. tower-diagnostics-20250203_0200.zip
- Closed
- 320 views
-
I have an Unraid version 7.0.0 upgrade issue where my HBA is detected, but Unraid has trouble finding drives plugged into the HBA; error in logs are “device /dev/sd* problem getting id”. To resolve this, in BIOS I have to enable CSM BIOS Legacy boot to allow Unraid 7.0.0 to find all drives and no errors. However, enabling CSM then disables iGPU on my CPU, something that I can’t be without. As a workaround, I have gone to version 6.12.15 which is working with disabled CSM in BIOS an
- Solved
- Minor
- 1274 views
-
Hey guys, i noticed, that the mover stucks itself, when trying to move certain files. For example it stucks when moving files named "lock" or "haltcode". I tried running the mover through terminal and tthrough webui, with and without mover tuning installed, with reboots in between uninstalling mover tuning and so on and so forth, it always gets stuck on those files. And just to get ahead of questions: - Yes, i know i dont need to or shouldnt move the docker folder
- Minor
- 378 views
-
I did the update from 6.16.6 to 7.0. On reboot it told me the cache drive INTEL_SSDPEDMD020T4_CVFT4346004G2P0EGN (nvme0n1) was unmountable disc present What do I do to fix this. Is downgrading an option? Or am I just SOL? Pls help. jessie-diagnostics-20250124_1330.zip
- Solved
- Urgent
- 331 views
-
I upgraded my Unraid OS from 6.12.10 (which was working fine) to 6.12.15. The upgrade process proceeds normally, and I wait until all the plugins are updated before rebooting. Once I reboot, everything works okay for the first few minutes. I can access the WebGUI from another computer over the network. About 3-5 minutes of uptime, the network card seems to be unresponsive. I can no longer ping the Unraid machine from elsewhere on the network, like a Windows PC; and on t
- Closed
- 521 views
-
Hi, I updated to version 7.0.0 today. Afterwards, my hard disks in the array were no longer recognized. After a few restarts I was able to restart the array and the parity disk had to be rewritten. However, the process stopped when errors were found on a disk. At the moment one of the two disks is found, but my second one is not. Thanks for the help. After a restart, the first disk is found again, but the second is not:
- Closed
- 682 views
-
I was trying to allocate 1.5T to a VM and when confirming, it ignored the decimal place and set it to 15T. As a result, I had to go through the shrink operation to set it to 1500G. After setting it to 1500G, unraid only shows 1T. Expected behavior: Error, or not ignore decimals. Provide actual disk capacity reading, not round by 500G
- Minor
- 269 views
-
Hi, Am running Unraid 6.2.14 (updated yesterday). I've downloaded and installed the nextcloud-aio-mastercontainer app (and the required sub apps it installs, or you choose from the AIO management web page). Everything has been working beautifully for a few weeks (and still is really) except for the last few days where the dockers display page is saying there is an update available and to "apply update" for all the Nextcloud AIO apps. I then logged into the Nextcloud AIO management web page,
- Closed
- 2496 views
-
Hello, Just installed the patch plugin and attempted to apply patch 1.0.0, but I got the following error: Installing /boot/config/plugins/unraid.patch/7.0.0/20250128204439-pr271.patch... patching file emhttp/plugins/dynamix.vm.manager/templates/Custom.form.php patching file emhttp/plugins/dynamix/include/FileTree.php patching file emhttp/plugins/dynamix/include/ShareList.php patching file emhttp/plugins/dynamix/scripts/diagnostics patching file sbin/mover Hunk #1 FAILED at
- Closed
- Minor
- 704 views
-
So with 7.0 RC2 and now with 7.0 Release, I'm missing the header information in Edge and the update screen fails to load properly... I've tried 2 different servers from 2 different client computers with the same results and if I view them in Chrome or from an Edge docker they look correct.
- Closed
- 443 views
-
Hello Unraid Community, I am using two NVMe drives in my Unraid system, and I’ve tried both XFS and Btrfs file systems to set them up for use in the array. However, I keep encountering the same "Unmountable: Wrong File System" error regardless of the file system. Below is a detailed explanation of the issue and the steps I’ve taken so far. System Details: Unraid Version: [7.0.0] Drives: nvme0n1p1: Samsung SSD 980 500GB nvme1n1p1: Samsung SSD 980 500GB
- Solved
- Minor
- 3211 views
