Stable Releases

无法进行奇偶校验，因为需要超过 24 小时   两条日志的相似之处： 1 月 3 日 09:14:31 nas winbindd[25413]: [2025/01/03 09:14:31.640945, 0] ../../source3/winbindd/winbindd_samr.c:111(open_internal_lsa_conn) 1 月 3 日 09:14:31 nas winbindd[25413]: open_internal_lsa_conn: 无法连接到 lsarpc 管道: NT_STATUS_IO_TIMEOUT 1 月 3 日 09:15:55 nas winbindd[25413]: [2025/01/03 09:15:53.515358, 0] ../../source3/winbindd/winbindd_samr.c:71(open_internal_samr_conn) 1 月 3 日 09:15:55 nas winbindd[25413]: open_internal_samr_conn: 无法连接到

I cannot reboot my unRAID server without terminating the diagnostics process, nor can I run diagnostics. This is because I have a share used by Frigate NVR called "cctv" with 53,000 small MP4 files inside it and 3,400 of these are on the cache right now.  The diagnostics process tries to collect data on all of these files and when running diagnostics via the GUI the web interface hangs after a few minutes of reporting the logging of all these file names.  At reboot time, all I see is "starting d

since many versions already unraid ships with an annoyingly misconfigured firefox. English users do not notice it, but if you apply a different language to UNRAID, you are always asked if you want translate it to english (because that is still the OS language, UNRAID only changes the internal GUI translations for the NGINX web pages). While not a real error, this is just an annoying popup that comes up every time you open a new session on the console. After quitting it for the 100

I used both tools to correct permissions for the appdata and disks but still with Nobody and user they will not start or have read write access. root@Prime:~# ls -la /mnt/ total 16 drwxr-xr-x 24 root   root  480 Dec 31 19:31 ./ drwxr-xr-x 21 root   root  460 Dec 31 19:31 ../ drwxrwxrwt  2 nobody users  40 Dec 31 19:30 addons/ drwxrwxrwx  1 nobody users 146 Dec 31 19:41 cache/ drwxrwxrwx  9 nobody users 146 Dec 31 19:41 disk1/ drwxrwxrwx  5 nobody users  67 Dec 31 19:41 disk10/

Hi,   I found the my 10G network card cannot negotiate to 5G link mode after system boot. However, the link speed could recover to 5000bastT/Full after executing command "ethtool -s eth0 autoneg on".   My network card is "Intel Corporation Ethernet 10G 2P X550-t Adapter". The switch is NETGEAR MS510TXPP. Here is the process to reproduce the problem:   ethtool -i eth0   driver: ixgbe version: 5.15.40-Unraid firmware-version: 0x80000f32, 19.5.12 expa

While a parity operation is running the mover cannot be triggered manually, it is greyed out in the GUI. This (imo) leads to the expectation that a scheduled mover will also not run while a parity operation is ongoing. However, at present a scheduled mover will still run and cripple parity operation speeds while moving around files.   I think either the mover should always run, despite the parity operation, but then also be manually runnable.... .... OR it should never r

Hello,   I created vlans on my network and enabled vlans on my Unraid host. I want some containers available on iot vlan. I tried with macvlan custom network and for some containers it's ok. But I have some other containers which are designed for a bridge network. So I created a custom network with bridge driver on eth0.10   docker network create -d bridge -o com.docker.network.bridge.host_binding_ipv4="192.168.10.50" iotnet   192.168.10.50 is the ip of

Hey guys.   Unraid v6.12.3 Unassigned Devices v2023.08.16   Basically, the utilization does show up under Main > Unassigned Devices. However, it does not show in the Dashboard.   Please see image below!   Thank you.      

shfs (/mnt/user) does not report the gross sum of storage used / available when multiple pools are used. It seems to only report the net storage provided by the primary storage location (eg; user (user0+cache) vs user0)

Suddenly my server become unstable. no hardware change for 2 years. Only updates. It can be stable for 10 days. And can reboot 10 times in a day or suddenly freeze and hangs and only not clean shutdown help.    asrock x570 amd 5950 128gb memory   c-state is off in bios amd pbu curve level 4 in bios   memtest run for 2 hours - all is ok.       syslog-172.16.82.1.log.zip tower-diagnostics-20241225-1102.zip

Since the update from 6.12.13 to 6.12.14, i cant start the Docker Service, no matter which settings i use. salomon-diagnostics-20241225_2326.zip

Pretty annoying to be unable to import my Wireguard tunnel from a file, because the file downloaded from the GUI is corrupted. No, I cannot import from the QR code.   I guess I will have to type in the extremely long preshared keys.

Hi. I tried to add another "Path" to my plex Container (+Add another Path, Port, Variable, Label or Device). I made a mistake when adding this path, because the container already existed. Of course I did not recognized this mistake and clicked apply. After that I got the result, with an error of a duplicate mount point. BUT now the docker container got stopped an uninstalled!? This must be a bug.   I tried to recreate this behaviour with my emby container and got the sam

Hello everyone, I recently replaced several components of my server as part of preventive maintenance, including the USB stick, CPU, motherboard, RAM, and PSU. However, I’m still using my old drives.   I’ve noticed that my server is rebooting randomly, usually within 4 hours after the array starts. Interestingly, when I leave the server running without starting the array, it manages to stay on for up to 2 days. I’m not sure if this detail is helpful, but I thought it was worth men

It's just a small annoyance and it needs a well defined order to see it:   1.) Start a parity check. Let it run for a minute or so. Cancel the parity check. Clear the current notification. Wait a day or so.   2.) Start a parity check and let it finish.   --> The GUI notification shows a red icon even after a successful second run. The GUI notification will take the previously canceled parity check and it's result into account. Looking into the History you will se

A remotely mounted veracrypt volume stored on the main array performs monstrously slow. Locally, it bursts some amount of data to make it appear to the user as being super fast, but after said amount, it grinds down to like 4MB/s.   This only occurs with the combination of being stored on Unraid AND and using veracrypt. In other words, normal files perform well. And a veracrypt volume mounted on a local disk performs fine as well. It's the combination that kills performance (after

I have a problem with rsync. When I run `rsync -azh --partial "$SRC" "$TARGET"` files are transferred.   When I try to do it again, the same files are transferred again.   when i do on new files i get ```bash stat "$SCR_ONE_FILE" 16777244 1002714 -rw-r--r-- 1 proteus staff 0 8845961 "Dec 22 15:06:26 2024" "Dec 22 10:55:54 2024" "Dec 22 10:55:54 2024" "Dec 22 10:55:54 2024" 4096 17280 0 "$SCR_ONE_FILE" ``` and ```bash stat "$TARGET_ONE_

My system has two NVMe attached to the motherboard. This combo worked throughout the latest releases without any problems. With the installation of 6.12.13 one of the two NVMe throws errors now:   Aug 27 08:19:17 Tower unassigned.devices: Mounting partition 'nvme1n1p1' at mountpoint '/mnt/disks/NVMe2'... Aug 27 08:19:17 Tower unassigned.devices: Mount cmd: /sbin/mount -t 'xfs' -o rw,relatime,discard '/dev/nvme1n1p1' '/mnt/disks/NVMe2' Aug 27 08:19:17 Tower kernel: XFS (nvme1n1p1): Mounti

Private share is offered in network-browser, but mounting the share only shows empty directory. Same after changing to public. Access from windows normally works. unraid-diagnostics-20241218_1158.zip

In relation to this thread:   and this one:   and my comment here:   So while what I noted above seemed to solve that problem. Yesterday I had an issue where my Ubuntu VM seemed to become partially unresponsive while doing various things over NFS (sab downloading).   Several hours later, I tried to figure out what was going on as several things on the VM were unhappy. I ended up rebooting it. Then tried to load a Unraid NFS share via autofs. Whenever I

So ive noticed since some versions /Settings/CPUset is not working.   Like i can choose, click apply, it says "please wait" forever. When i reload, all settings lost.   edit: sorry please move to right forum edit2: i waited 30 min, reload, settings lost.     unraid-server-diagnostics-20240919-1254.zip

Only Linux VMs started to lag quite frequently after upgrading to 6.12.14 from 6.12.6. And also the processor consumption is triggered more than 80% whenever any ssh connection is made to any of the linux VMs. No idea what is going on. Attaching the diagnostics here. hardware i am using  Ryzen 5600g 6C 12T, Motherboard - MSI B550 gen 3 64Gb RAM unraidtower-diagnostics-20241215_0345.zip

I shut down unraid every day, and turned it on via wol in the morning, and was unable to connect via ssh or webui, docker vm also doesn't work. Ping ports like 22  are normal.   Short press of the power button will not shut down. Long press the power button to shut down, then press the power button to turn on, it can start normally.   This problem does not exist in 6.12.13 and earlier versions The probability of recurrence of the problem is 100%    

My server is crashing now daily. I've enabled syslog mirroring, but no crash dumps are logged there, and everyday it's stopping in a different place. I'm at a loss as to where to go from here.   The NIC still responds to Ping, but SSH doesn't, and the WebGUI is non-responsive, too.   Help! nas-diagnostics-20241209-1309.zip

I just upgraded from 6.12.8 to 6.12.13. Everything was working normally. Now that I've upgraded to 6.12.13, I effectively cannot transfer to the server. At worst, it just stalls. At best, it goes at 99 Kb/s.    I'm transferring from a W11 VM to the main server share. Previously, this transfer would occur up to 450 MBps, the approximate speed of the NVMe drives involved (server share has NVMe cache, VM has a passed-through NVMe). Any help much appreciated!   Server 15x WD