Stable Releases
Bug reports for stable releases.
2506 reports in this category
-
Hello good people:) I´ve got a problem with this version of the software... One of my harddrives keeps breaking, it disables itself.. And i cant find a reason why?? I´ve rebuild the array, 2 times.. But it keeps having the same error.. I´ve tried a smart test, and it says there is no errors.. I really hope one of you have a fix.. Or a way to downgrade.. Thank you so much:) tower-diagnostics-20240930-1429.zip
- Closed
- 355 views
-
I've been having monthly, then weekly and now daily crashes of my unraid box. I've captured the last two crashes using syslog-ng on my pfSense box that runs independently I suspect that it's related to my USB hub on which I have the unraid flash drive, my UPS backup and a Google Coral. The common failure in both logs is: unraid kernel: xhci_hcd 0000:02:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. unraid kernel: xhci_hcd 0000:02:00.0: WARN Su
- Minor
- 1036 views
-
Hello, I bought an Asus 10G network card in SFP+. I mounted it on the Unraid server, and it reports errors on the system logs. I looked a little on the net and asked GPT, I do not have the possibility to update drivers on Unraid. GPT tells me that these are not serious errors, but I would like to know if anyone has already had this problem and maybe a solution. Clarification: I am in stable version of Unraid. The network card is new, it does not heat up, it is mou
- Annoyance
- 909 views
-
My UNRAID disks spin down when not in use (this works fine). Also for my monthly parity check, smaller disks spin down after their size "mark" passes. i.e. In an array with a mix of 4TB disks and 8TB disks, the 4TB disks spin down after 50% of parity check. Even ALL disks spin down if parity happens to be larger than the largest data disk and the check goes in the area where only parity size is. (I had a 10TB parity with 8TB data disks, pending further disk swaps) Why this d
- Solved
- Minor
- 404 views
-
1. Add a new share 2. Select the 'Read settings from ' option from the upper right and pick an existing share 3. 'Include Drives' and 'Exclude Drives' drop downs disappear (In Brave anyways) 4. If you click on 'Help', it completely covers the drive boxes 4. 'Reset' at the bottom and just set it up manually to continue
- Minor
- 339 views
-
This issue is present on 6.12.10, I updated to 6.12.13 to confirm it's there as well. When running the BTRFS 'check' command on a pool with a bad/corrupted disk (2-disk mirror in my case, with 1 disk that is dropping offline for unknown reasons), the printout from the command causes 1000s of lines to be printed. There's no internal line or pagination limit, which causes the disk page to have a very long scroll. Eventually the number of lines printed hits some sort of browser/GUI li
- Minor
- 881 views
-
I am experiencing a complete system freeze when attempting to start the Virtual Machines service in Unraid. The issue occurs immediately after initiating the service, and I am unable to interact with the system thereafter. Additional Information: Problem: Unraid freezes upon starting the Virtual Machines service. No error messages are displayed, but the system becomes unresponsive. This issue has been consistent after multiple reboots. I have recently changed hard
- Closed
- 886 views
-
Continuous kernel panics on version 6.12.13. I experience panics on boot, prior to starting array, but mostly after array has started. System will lock up, but drives spinning forcing hard reboot. Ran memtest, no issues. Swapped memory just to be sure and re-ran memtest, no issues reported. With either memory set, still experience panics. unraid-diagnostics-20240927_0552.zip
- Minor
- 280 views
-
Hello there, I'm having an issue with my Unraid system randomly shutting down, and I can't seem to figure out why. Attached are the latest logs which show a shut down a couple of hours ago. Would someone be able to see if the logs reveal something I should know about so I can get it fixed? This started happening a few weeks ago on and off. syslog.txt
- Minor
- 535 views
-
I run windows 10 vm with all the drives set to manual and after upgrading I started getting major Logitech mouse lag in games and when I moved my mouse to my work computer with the Synergy mouse sharing application. I updated the mouse driver, updated to the latest VirtIO drivers. I then changed the input polling rate down to the lowest setting of 125/sec, it slightly improved, but still not usable. I ended up downgrading back to 6.12.8 and normal mouse operation returned. tower-diagnostics-2
- Urgent
- 334 views
-
In the past week, about every two days, the GUI suddenly becomes inaccessible. I checked the router and found that Unraid had lost its connection. Naturally, SSH is also unable to access Unraid. The only way to recover is to hold down the power button for a forced shutdown, then reboot to restore functionality. I checked the local logs stored on the system log server and found that it seems the emhttp service went down. The issue appears to stem from some problems following an RCU expedited stal
- Urgent
- 803 views
-
However, running /usr/local/emhttp/plugins/dynamix.docker/mnagers/scripts/dockerupdate can check for updates normally, and the ghcr.io container is not affected.
- Urgent
- 280 views
-
Support, I was running unraid 6.12.13 with GPU pass through to a Windows 11 VM. I read in the 6.12.12 update notes that we should be using virtio-net instead of virtio for the network interface due to a known performance issue. I did that and then started the VM again and the GPU pass through stopped working. I had to create a new VM with all the same settings and re-attach to the existing vdisk image to get running again. I think somet
- Minor
- 391 views
-
I was in the process of removing a data drive from the array (shrinking it) and: 1. The docs need to be updated: here It references user scripts that don't work post 6.12 2. Those instructions for manually zeroing the drive break the stop array procedure The docs call for unmounting the drive then zero-ing it out. That all worked fine. The problem came when trying to stop the array. The stop array script seems to want confirmation of a unmounting.
- Minor
- 231 views
-
Hello, I am using a two weeks old fresh install of unraid. Lancache and Paperless (Docker) I have this strange error in my syslog and don't know what to do as I think it is not correct when it repeats every second. 1 HDD as Disk 1 1 HDD as Parity 1 HHD as unassigned for Lancache Any advice? Regards CarMagician unraid-diagnostics-20231219-1612.zip
- Minor
- 882 views
-
Neither via the interface, nor via hdparm -y can I spin down my harddrives. Works again after downgrade to 6.12.11 root@Mediadinger:~# hdparm -y /dev/sdi /dev/sdi: SG_IO: bad/missing sense data, sb[]: 70 00 01 00 00 00 00 0a 00 50 40 ff 00 1d 00 00 00 81 00 00 00 00 00 00 00 00 00 00 00 00 00 00 drive state is: unknown Since my public ipv6 block is all over the place in the diagnostics file, I am hesitant to post it. I'd rather supply information on demand.
- Urgent
- 2754 views
-
Upgraded the server from 6.12.10 to 6.12.13, and I was unable to stream anything from my Plex server running on Windows Server 2019. Things would take a long time to load, and once they did you would only get a few seconds before everything started buffering again. This was an issue for multiple users on multiple types of devices, on multiple local and internet sources. Also rebooted the internet router, no change. Streaming was working fine in a browser directly on the VM where the Plex server
- Minor
- 325 views
-
I maintain Zerotier Docker extension. The extension creates a virtual interface and provides remote access to the server through the private virtual network. Through the years and recent updates of Unraid, the extension experienced several changes / troubles, but the latest one does look like a bug. Many versions ago, something changed and UI stopped listening on the virtual interface. It wasn't on the Release Notes I believe. However, after some investigation, I found a solution and
- Minor
- 1098 views
-
Sep 13 20:03:42 NAS-PC smbd[5414]: [2024/09/13 20:03:42.358077, 0] ../../source3/smbd/fd_handle.c:39(fd_handle_destructor) Sep 13 20:03:42 NAS-PC smbd[5414]: PANIC: assert failed at ../../source3/smbd/fd_handle.c(39): (fh->fd == -1) || (fh->fd == AT_FDCWD) Sep 13 20:03:42 NAS-PC smbd[5414]: [2024/09/13 20:03:42.358117, 0] ../../lib/util/fault.c:173(smb_panic_log) Sep 13 20:03:42 NAS-PC smbd[5414]: =============================================================== Sep 13 20:03:42 NAS-PC
- Closed
- Minor
- 473 views
-
This scenario is repeatable on my 6.12.13 install. Built in VPN with wireguard is active and handful of containers are using this gateway. I have SWAG/NGINX running for reverse proxy and a handful of containers are not on the VPN network. (I tried both reverse proxy containers sharing a custom network and on bridge while manually directing container to app IP in NGINX config and does not seem to affect this scenario) I can access the reverse proxy fine. I shu
- Minor
- 875 views
-
Aug 5 04:42:57 NAS kernel: kernel tried to execute NX-protected page - exploit attempt? (uid: 0) Aug 5 04:42:57 NAS kernel: BUG: unable to handle page fault for address: ffff88810a81cc90 Aug 5 04:42:57 NAS kernel: #PF: supervisor instruction fetch in kernel mode Aug 5 04:42:57 NAS kernel: #PF: error_code(0x0011) - permissions violation Aug 5 04:42:57 NAS kernel: PGD 4c01067 P4D 4c01067 PUD 101587063 PMD 15bea6063 PTE 800000010a81c163 Aug 5 04:42:57 NAS kernel: Oops: 0011 [#1] PREEMPT SMP N
- Solved
- Urgent
- 1267 views
-
I keep getting a crash every 3 days on my NAS and i cannot recover it unless i hard reset it i share the full diagnostics and also my syslog below The start of the error goes like: BUG: unable to handle page fault for address: ffffea4016ed6ce6 Sep 11 13:34:33 Nubecita kernel: #PF: supervisor read access in kernel mode Sep 11 13:34:33 Nubecita kernel: #PF: error_code(0x0000) - not-present page Sep 11 13:34:33 Nubecita kernel: PGD 83e2ef067 P4D 83e2ef067 PUD 0 Sep 11 13:34:33 Nubec
- Minor
- 613 views
-
Docker crashed and only starts after a reboot I think server ran out of RAM, but, don't know why. tower-diagnostics-20240908-1049.zip
- Minor
- 219 views
-
The mail for last months parity check (triggered Aug 31st, completed Sep 1st) includes the result of a previous extra check from earlier in August. towernas-diagnostics-20240909-2055.zip
- Minor
- 204 views
-
Getting IO errors on all downloads after update to 6.12.13
- Minor
- 314 views
