Leaderboard

The new image has built so if you now pull down latest it should work as expected Sent from my EML-L29 using Tapatalk

Summary: Support Thread for ich777 Gameserver Dockers (CounterStrike: Source & ConterStrike: GO, TeamFortress 2, ArmA III,... - complete list in the second post) Application: SteamCMD DockerHub: https://hub.docker.com/r/ich777/steamcmd All dockers are easy to set up and are highly customizable, all dockers are tested with the standard configuration (port forwarding,...) if the are reachable and show up in the server list form the "outside". The default password for the gameservers if enabled is: Docker It there is a admin password the default password is: adminDocker Please read the discription of each docker and the variables that you install (some dockers need special variables to run). The Steam Username and Password is only needed in templates where the two fields are marked as requirde with the red * Created a Steam Group: https://steamcommunity.com/groups/dockersforunraid If you like my work, please consider making a donation

It will help a lot if not read write in same time happen at any disk. But this won't final solve the transfer in sine pattern.

In fact, not 200GE CPU horse pwoer relate. First, reconstruct write turn on ?

I'm sure @SpencerJ might be able to swing it

Hi, I'm trying to set this up for the first time, and I run all of my Docker containers in Unraid with the 'Custom' network setting selected so that I can map an individual IP to the container in my network. I also tried to set the Web UI Port, HTTP Port and HTTPS Port options in the Unraid Docker app config to the standard ports (8181, 80 and 443 - attached in the picture below) which appear to be setting environmental variables in the docker command, but it seems the container starts and defaults to the standard ports of 8181, 8080 and 4443 and ignores the environmental variables set to change the application ports in the container. Has this feature been changed? I can't seem to get it to work Thanks.

Not all shown should read: --inactive 3600 --ping 10 --ping-exit 60 --mute-replay-warnings

It is very likely the problem! In which case it is not a change in behaviour, but merely that you have not encountered the exact circumstance before. In the case of any conflict about which disk to use then the Split Level setting takes precedence. What do you have set for the Split Level for the share, and what is the actual path name for the file? It is possible that the Split Level setting is forcing a particular drive regardless of the Minimum Free Space setting.

Split settings override minimum space, either change split level or delete the folder form disk4.

ok guys, spotted the issue. it was a legacy bug that the additional logging picked up causing the exit of sabnzbd (even though it was running). sadly i cannot currently build a new image with the fix as docker hub is currently in maintenance mode and looks like it wont back online for approx another 8 hours, so i will have to press the button in the morning.

Very nice. I had been trying to hunt down the Node 804 when I was looking to upgrade last year, at the time it was sold out most places. Ended up with another Fractal case which I have also replace due to space limitations. I love the fractal cases though really well built and good value for money.

You ran out of space. If you press ALT+F4, you'll see the log. I tried with 10GB and it's too small. Increasing the disk space to 20GB fixed it. I used UTM 9.6 with 64bit and Enterprise.

Something is off. I didn't got that error. If you want I can try installing sophos again and then let you know what I did. Have you checked the iso?

I removed then re-added CA and all works fine now. Thanks again for checking, and thanks for the great plugins!

Thanks for the reply jonnie.black. I'm aware that Unraid doesnt support infiniband as of 6.6.7 and figured out that there was an issue with my card not saving the config after a reboot to Ethernet and kept switching back to Auto Sensing. Had it set to ethernet before. Eventually, I re-flashed the firmware manually to the same version and it seems to be working just fine after 10 reboots and Unraid recognizes it in the network settings. I'm going to be out of the country for a week, so I can't test it out until I come back. Out of curiosity: Have there been any posts/reports of 40gbe connections working with unraid? If not, guess I might be the 1st 😁 Thanks.

Create a folder in the root of the flash drive called openvpn Toss the .ovpn file into it. Then on Settings you can select the file via the dropdown From the OP of the support thread: