Gragorg

If you obtained the new key from the unraid GUI you will likely need a reboot to show up.

This video should help you migrating to a new server.

Have you seen this video from Spaceinvader One?

Is it possible they are datasets (ZFS) and not folders?

The 6 port card you listed is 4x interface but is only 2x is supported. There is a great post on testing of sata cards some have the wattage listed. A similar card to the 6 port is tested in the post with wattage listed.

You shouldn't have to change swags container ports from 80 and 443. Container ports are unique to the containers. Domain forwarding in router is not required that is what SWAG does. On your DDNS docker did you remove the email field? If this allows Cloudflare DDNS to run you don't need DuckDNS to track your ip that is what Cloudflare DDNS does. Your containers don't really need any configuration since SWAG is just directing to their exsisting web gui. Having said that I was a former SWAG user and found it to be not very user friendly to add new proxy entry. I now prefer Nginx Proxy Manager as it is very simplified. Also why did you have to change port 80 and 443 for unraid? If your only looking to use only Nginx in Swag then NPM is far more simplified. These are the videos that I used to accomplish reverse proxy using NPM if you want to go that route. Buy Domain and connect it to cloudflare. Here is a great video Follow DynDNS portion of this video at 9:20 skip the duckdns part. I used this video for NPM

I wouldn't recommend changing 80 and 443 for unraid. Change the ports in the NPM docker instead and be sure to forward the rights ones. I would get rid of duck dns if you bought a domain and use Cloudflare-DDNS by selfhosters. Use Spaceinvader video here and skip ahead to 9:20 in the video. You can setup you DNS challenge as cloudflare in NPM. Also do not forward a port for Overseerr or Sonar that is the whole point of NPM to direct traffic to those containers. The myserver.duckdns.org:8989 works because you forwarded the port to the gui. This is not secure.

Not sure if that card will work. It has an Asmedia ASM1061 which is good for two ports and is using a port multiplier. I don't think port multipliers work with Asmedia controllers in unraid. Here is the recommended list of controllers.

Here is a good video about changing out cache drive. I would install and run Appdata Backup plugin so that you have a backup before you try and change it. This way you can always restore your appdata from the backup if something goes wrong.

Possibly the router updated and restarted? If you type //broxi into the web browser it should load your gui regardless of ip.

I don't beleive you have to set an email when using an API token. See here from support. Depreciated Parameters -e EMAIL - Your CloudFlare email address when using an Account-level token. This variable MUST NOT be set when using a scoped API token. You can remove the email parameter from the template. I don't know if this is causing your issue thou.

Looking through system devices and say this 9:0:0:0]disk ATA ST4000VN000-1H41 SC46 /dev/sdi 4.00TB Does this mean that ATA9 is this 4TB Seagate (Disk5)?

Thanks. Was monitoring logs and am getting some ata9 errrors. I have new power cables on order should be here tommorow. Do you think the power cable on the new cache drive is causing this? tower-diagnostics-20240123-1227.zip

Ok thanks JorgeB I dont have anymore power adapters but I did change the sata cable. I'll have to order some power adapters to have a spare around just incase. Seems to be ok for now. Thanks for taking a look! How easy would it be to add a second 1 tb ssd and mirror the cache? It is currently in zfs.

Got it shut down ran extended SMART on the new SSD cache drive and it passed. I reinstalled it with a new sata cable. Mover is currently moving the cache file back off the array. Can anyone confirm if the I/O errors in the logs look like a bad cable?

So my cache drive was a 240GB SSD and I am replacing with a 1TB SSD. I Stopped docker and VMS and made changes to the mover action to move files from cache to array. Installed the new drive and started mover to move from arrray to cache. Started moving and now mover has stoped and logs are filled with IO errors. I no longer have the option to stop the array. How do I proceed? tower-diagnostics-20240122-1454.zip EDIT: ran mover stop and it stopped mover. Tried to stop the array to swap cables and now this is being spammed and the array wont stop. Jan 22 15:23:37 Tower root: rmdir: failed to remove '/mnt/user': Device or resource busy Jan 22 15:23:37 Tower emhttpd: shcmd (6385): exit status: 1 Jan 22 15:23:37 Tower emhttpd: shcmd (6387): rm -f /boot/config/plugins/dynamix/mover.cron Jan 22 15:23:37 Tower emhttpd: shcmd (6388): /usr/local/sbin/update_cron Jan 22 15:23:37 Tower emhttpd: Retry unmounting user share(s)... Retry unmounting user share(s)... is showing in the bottom left. How can I stop ARRAY from cmd line?

I was in the same scenario some years ago. As trurl say more ram for sure. What I did was buy the fastest used CPU that ran in my current board. I believe a i7-7700k will run in your board and could be had for about $100 off ebay. This is a huge upgrade from your current Celeron. As you say that will bump you to 4 cores but equally as important is it runs 8 threads while your Celeron runs 2.

Then I would use Dynamix file manager to move data.

When I removed my old 2TB hard drives I used the unBalance plugin to move the data off the old drives. Here is the section in Unraid docs to shrink the array.

Still haven't been able to address why my IP is listed twice in my router. Have noticed this occasionally in my logs *** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. *** unraid Bonding and Bridging are both off on this server however they are both turned on my other server. Not sure if this has anything to do with it. In the router the IP shows twice with different MAC addresses When I run "ip a" One MAC address shows as eth0 and the second shows as vhost0@eth0. Any ideas? tower-diagnostics-20240116-1346.zip

To start put the usb in a windows computer and see if it detects any issues. Allow windows to fix it if it does. Try another USB port preferably a USB 2.0 one if you have one.

Here is a video how to do it by Spaceinvader one

I only have the drive there for testing. It looks like you are right. I formatted the drive to XFS and it now remains spun down.

Yes clicking the orb to spin down. The current filesystem is ZFS. I have been on 6.12.6 since launch. I swear it had remained spun down prior when it was not mounted.

Installed the new plugin today now I have an unassigned unmounted drive sdb that will not spin down. If I spin it down it spins back up. How can I roll back to last version? tower-diagnostics-20240112-1522.zip