Dwarfboysim

I also tried: lsusb and it gave the below Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0d9f:0002 Powercom Co., Ltd Black Knight PRO / WOW Uninterruptible Power Supply (Cypress HID->COM RS232) Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Hi, I opened up a terminal in Unraid and got the following results for the command: ls /dev/ttyUSB* I got "ls: cannot access '/dev/ttyUSB*': No such file or directory" for the command: dmesg | grep tty I got "[ 0.288678] printk: legacy console [tty0] enabled" any clues? Thanks, Dwarfboysim

And does anyone know the actual location of the ups.conf file as I cannot seem to locate it.

Hi, Sorry for the delayed reply. Can I get an example and advice to determine exactly which device/USB port the UPS is connected to and then how to put that into the UPS conf file. Thanks, Dwarfboysim

First command gave error: ls: cannot access '/dev/ttyUSB*': No such file or directory Second command gave this root@UNRAID:~# dmesg | grep ty [ 0.541730] SGI XFS with ACLs, security attributes, no debug enabled [ 0.551252] Key type asymmetric registered [ 2.397144] Btrfs loaded, zoned=no, fsverity=no [ 4.041561] sd 6:0:0:0: Attached scsi generic sg0 type 0 [ 5.383254] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 5.387705] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 5.389574] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 5.390136] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 5.390723] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 5.391168] sd 5:0:0:0: Attached scsi generic sg6 type 0 [ 46.130645] loop0: detected capacity change from 0 to 1334912 [ 46.139547] loop1: detected capacity change from 0 to 355176 [ 80.415912] ACPI: bus type drm_connector registered [ 164.318019] md: import_slot: 0 empty [ 164.318057] md: import_slot: 29 empty [ 218.919599] loop2: detected capacity change from 0 to 94371840 [ 225.054016] loop3: detected capacity change from 0 to 2097152 [ 281.976721] md: import_slot: 0 empty [ 281.976731] md: import_slot: 29 empty [ 321.294373] md: import_slot: 29 empty [ 369.290747] loop2: detected capacity change from 0 to 94371840 [ 372.883723] loop3: detected capacity change from 0 to 2097152

Any idea why it says this in SYSLOG though: Apr 15 07:42:34 UNRAID rc.nut: Unable to open auto: No such file or directorycould the UPS.conf be corrupt? Is the "auto" referring to the line in the UPS.conf?

Thanks for the tip. Still won't start and SYSLOG shows the below: Contents of UPS.CONF inside the NUT plugin settings reads as: [optiups] driver = powercom port = auto type = IMP # If not in manual mode, the following lines are reserved and overwritten by GUI: # L1:[UPSNAME]/L2:DRIVER/L3:PORT/L4-L7:SNMP/L8:DEBUG_MIN Apr 15 07:42:34 UNRAID rc.nut: Network UPS Tools upsdrvctl - UPS driver controller 2.8.5 release Apr 15 07:42:34 UNRAID rc.nut: Network UPS Tools 2.8.5 release - PowerCom protocol UPS driver 0.27 Apr 15 07:42:34 UNRAID rc.nut: Fatal error: unusable configuration Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: Unable to open auto: No such file or directory Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: Things to try: Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: - Check 'port=' in ups.conf Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: - Check owner/permissions of all parts of path Apr 15 07:42:34 UNRAID rc.nut: Apr 15 07:42:34 UNRAID rc.nut: Driver failed to start (exit status=1)

Hi all, Would love to get my UPS talking with Unraid properly. It's an: OptiUPS ES800C I ran lsusb from the command prompt of unraid and got: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0d9f:0002 Powercom Co., Ltd Black Knight PRO / WOW Uninterruptible Power Supply (Cypress HID->COM RS232) Bus 001 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Could someone assist on what I need to set in NUT and also the /etc/nut/ups.conf please. Thanks, Dwarfboysim

Hi all, Unsure what happened but my binhex qbittorrentvpn docker config got fouled up. I have restored from a back and the vpn is working and my sonarr, radarr etc are all working but I cannot get the web interface for the qbittorrent to open. Somehow i think its put itself onto a different ip to whats being specified in the container. Where can I go to check and test please

Hi all, I have multiple binhex containers sonarr, prowlarr, radarr etc all going happily through the binhex-qbittorrentvpn. I have replicated the network settings for flaresolverr but I continually get this error when going to test it within Prowlarr: "Unable to connect to proxy: An error occurred while sending the request.. Check the log surrounding this error for details" Reading the log for flaresolverr and it appears to be up and running and waiting for something to do.

Sorry for the belated reply. It turned out to be a faulty USB stick. Created a new one and all running fine now.

How can i retrieve the diagnostics please?

Hi all, I have had a problem that was occurring very intermittently but now appears to be happening 90% of the time. My UNRAID box starts up and gets to the login prompt on the box itself. I go to any of my other machines and the WEBGUI is not accessible. The box can be pinged. I have restarted numerous times and even booted UNRAID GUI mode. I got one successful startup and the GUI was accessible. Now every time I try I cant get to it. Any tips where I should start looking. I suspect something faulty on the mainboard perhaps? Thanks, Dwarfboysim

Hi, Will you be applying the latest Palworld update to the server Docker? Kind Regards, Greg

Hi all, Is there a backup taken of the server game. Joined my server this morning and the world has reverted to about 7 days earlier? Thanks, Dwarfboysim

Question is it possible to edit a config file within the appdata for the container to modify the backup days before purge is done of the oldest backups. Have a Java container based off binhex running with Cobblemon and don't want to risk breaking it.

Hi all, Have my SABnzdb container installed but according to the configuration inside the container app its using /config as the default user folder and system folder. I would like the user folder to use /data as specified in the container of the docker. As /config is appdata on my cache drive. How do I change this? Thanks, Dwarfboysim

Hi all, One of my NVME drives showed a blinking orange warning light in Disk Location. When i go in I see this warning against the drive with an N/A in the acknowledgement field: Read Self-test Log failed: Invalid Field in Command (0x4002) Can anyone tell me what this means. Is it an issue with the drive? Bug in Drive Location? Thanks, Dwarfboysim

Hi all, New to NZBGet. Have done the following: 1. Created a separate share called nzbdownloads. 2. Pointed the /data in the container config prior to installing to this. 3. Installed the binhex-nzbget container. 4. Configured the container/program leaving most as defaults with the exception of the news server etc. 5. Set the categories as: radarr, tv-sonarr and readarr to match the programs I use 6. Have setup an indexer in Prowlarr 7. Gone to add the download client to radarr, sonarr and readarr ensure the categories match and tested the connections, they get the green tick. 8. I then get the notifcation/error attached in all 3 - radarr, sonarr and readarr. I have tried to understand on the forums what this means and how to fix it but im getting more and more confused. FYI all the radarr, sonarr and readarr are binhex releases. For torrent I use the binhex-qbittorrent-vpn If someone could explain step by step what this means and how to fix it I would really appreciate the help. Thanks, Dwarfboysim

Has anyone noticed the latest push/update for Pixelmon is for an older version of the modpack 8.4.3? It broke my docker install. Anyone else had issues?

Hi all, Just reinstalled all my dockers. Now getting this when I run a backup. Any ideas what it means as it causes the backup to be classes as a failure. Note at the end of the backup is: [Main] An error occurred during backup! RETENTION WILL NOT BE CHECKED! Please review the log. If you need further assistance, ask in the support forum. Backup used to run fine. Any suggestions would be welcome. Thanks, Dwarfboysim

So should I just have the Primary storage for appdata set to Cache and no secondary storage. Then use the appdata backup plugin to back these up to a place on the array?

Wouldnt I want them on the array at some point at least to offer backup. I do also have the appdata backup add on

Hi all, Managed to get myself in a little pickle. The appdata share is now residing primarily on the cache only and not on the array. All docker containers have the default location: /mnt/cache/appdata/ Whats the best steps to stop all dockers, and fix the appdata share up and migrate the dockers to all be primarily on the array then secondary as cache? Thanks, Dwarfboysim PS: Have about 25 dockers

Hi, Would like to run a second instance of the docker binhex-readarr. My first one is running happily through the binhex-qbittorrentvpn. I see in the FAQ for this forum that web interface must have a different port number. by default its on 8787 from memory. What do i need to tweak in the docker and also the binhex-qbittorrentvpn to get the web interface to work. Thanks, Dwarfboysim