Meller

Members
  • Posts

    115
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Meller

  1. Why is it trying to use nvenc to encode? I don't have a GPU in my server. If I go to Settings > Video Encoding. I have the Video Codec set to HEVC and the Video Encoder to set to libx265. I've encoded nearly 25,000 tv show episodes so far, and this is the only one that fails over and over, with a huge log file attached to it.
  2. Hey I thought I'd ask again since no one answered before. I have this one file that keeps failing over and over and over. When I tried to view the details, it causes my browser to come to a complete stop. Lags it down really badly. Here's the log from it. No clue what any of this means. Thanks! unmanic_failed_log.txt
  3. Can anyone take a look at these 7 log files I have (I just copied the log from the details for each failed one, and made individual log files in notepad for them)? They keep failing, and I'm not sure why. I'm unsure what to look at specifically to figure out why they're failing. Especially log file #7. It's been failing for the past two weeks, almost instantly and I have no clue why or what to do to fix it. I'd greatly appreciate some help as I'm so confused. logs.rar
  4. Yea, I'm having a lot of super weird occurrences after the most recent update also. The UI/Dashboard for unmanic becomes pretty much unresponsive. set_mempolicy: Operation not permitted in my logs. And I have one fire that just keeps failing. [h264 @ 0x5605116f0680] SEI type 195 size 888 truncated at 48 [h264 @ 0x5605116f0680] SEI type 170 size 2032 truncated at 928 [h264 @ 0x5605116f0680] SEI type 81 size 1920 truncated at 32 [h264 @ 0x5605116f0680] SEI type 195 size 888 truncated at 47 [h264 @ 0x5605116f0680] SEI type 170 size 2032 truncated at 927 [h264 @ 0x5605116f0680] SEI type 81 size 1920 truncated at 31 [h264 @ 0x5605116f0680] A non-intra slice in an IDR NAL unit. [h264 @ 0x5605116f0680] decode_slice_header error [h264 @ 0x5605116f0680] no frame! [h264 @ 0x5605116f0680] SEI type 163 size 248 truncated at 32 [h264 @ 0x5605116f0680] non-existing PPS 2 referenced [h264 @ 0x5605116f0680] SEI type 163 size 248 truncated at 31 [h264 @ 0x5605116f0680] non-existing PPS 2 referenced [h264 @ 0x5605116f0680] decode_slice_header error [h264 @ 0x5605116f0680] no frame! [h264 @ 0x5605116f0680] SEI type 195 size 1448 truncated at 32 [h264 @ 0x5605116f0680] SEI type 195 size 1448 truncated at 30 [h264 @ 0x5605116f0680] top block unavailable for requested intra mode -1 [h264 @ 0x5605116f0680] error while decoding MB 0 0, bytestream 24 [h264 @ 0x5605116f0680] concealing 3600 DC, 3600 AC, 3600 MV errors in I frame [h264 @ 0x5605116f0680] SEI type 33 size 2024 truncated at 16 [h264 @ 0x5605116f0680] non-existing PPS 2 referenced Guessed Channel Layout for Input Stream #0.1 : 5.1 Literally all it says in the log. And it takes a good 10-20 seconds for that to even appear. The most recent unmanic push... is weird.
  5. There's a current "bug" in the most recent build where if you have failed transcodes... and you select more than one to add back to the pending list, it'll only add one and give you the error message to make sure unmanic is still running. Also... I have about 1,000 tv show episodes are are H265 but they are MKV. So it's changing their containers to MKV. Obviously when it does it, it literally only takes a couple of seconds per file. This is spitting out a ton of failed files. Once I readd them to the pending list, they typically go through without issue... but not sure if it's because it's going through so many files so very fast or what. Lastly, I've noticed this happening a lot here recently (past day or so), if I change my works from say 2 to 6. Two workers will select the same file. It'll go all the way to 100% on both workers, then nothing happens. Workers will start selecting the next file in the pending list, complete it almost instantly, never update the completed list as successful or failed, and the file stays in my unmanic transcoding location. I have to set the workers back to like 1 or 2. Completely stop the docker, then start it back... and of course when I do this, it has to completely rescan my entire library, and build the pending list all over again. Just figured I'd let you know.
  6. Ok, well how do I go about getting you these debug logs, because I've tried everything. The only thing I'm not doing that I see others doing is a GPU passthrough. My unraid server has no GPUs. all of my windows VM's just emulate the GPU. Sucks, but it is what it is.
  7. Hey, so first time using this... I followed your youtube video exactly on installing a Big Slur VM. I'm at the part where I just launched the VM for the very first time, opened up VNC, and selected MacOS Base System. It crashes immediately, and I basically just cycle through this one part over and over again. It tells me my "computer" restarted because of a problem. press a key or wait for startup to continue... then it crashes. Any clues on what I can look at that might be the issue?
  8. Strongly disagree. While yes, it took me a couple of weeks to defrag (xfs_fsr) 8x8tb drives all at 89% or higher capacity. I can honestly say... once I finished and had all drives at 1% fragmentation or less... the speed was so much faster. Files and folders open almost immediately, plex media plays almost immediately with the ability to skip/search so SO much faster. I will 100% keep an eye on my disk/file/folder fragmentation for now on as keeping it low has proven first hand how extremely beneficial it is in terms of speed.
  9. Hey, I know you mentioned before that this feature will be coming in a future update. I'm in no way trying to rush you or pester you about... merely curious how far down it is on your priority list. Feature: Adjust the quality, bit depth, CRF, etc of the transcode. Handbrake really gives me a lot of in depth options in regards to video transcode settings. On that note, if I have HDR x264 10 bit movies... will unmanic leave it as HDR and 10 bit, but simply transcode it to my container (in this case it's mkv) and make it x265... leaving the rest as is... IE HDR x264 10 Bit mkv file turns into HDR x265 10 bit mkv file? How does unmanic like Dolby Vision, HDR10, HDR10+ content?
  10. So I have a "small" array (comparatively to some folks). 11 drives, all 8TB (one drive is a parity). I made a post previous about how I was defragging them via xfs_fsr command, one drive at a time. So far I've made it though three drives. 8TB drives with 97% or higher fragmentation on both files and directories takes several days per drive haha. Anyways, I'm kind of curious how bad fragmentation affects xfs arrays. Now all my computers, except my unraid server are 100% purely nvme drives. So fragmentation hasn't been an issues for many years, thanks to SSD's and TRIM. As I'm defragging, I often see things like: extents before:4709 after:1 DONE ino=*numbers* most of the time it's before is less than 100. But I often enough see it say before:26000 after 3 (not done) or the highest so far was before:47569 after:4 (not done). What are extents... and how bad is it that it took up 47,000 and after it only took up 3 - 4?
  11. If you look at the very end, it says bind: address already in use Look at your other dockers and make sure none of them are already using port 5900. For me, krusader was using that port by default. I simply changed TMM's bind to a different port number, and it started up without issue.
  12. Ok, if I disabled parity... how would I go about defragging them in the best method? Is one at a time still the only route?
  13. Ok, if I didn't disable parity... how would I go about defragging them in the best method? Is one at a time still the only route?
  14. So I've read up on people running the following commands xfs_db -r /dev/md# (where # = whichever disk you want to mount to inspect) From there you can run "Frag" to see the fragmentation on the disk. I have 8 drives (7 drives 1 parity). All are roughly 8TB. The lowest one is 6.7TB used and the most full is 7.2TB. When I ran a frag check, I was getting fragmentation at 97.5% on the least fragmented drive, with the highest being over 98%. Most of the articles/reddit/forum posts I see have people talking about anything over say 60% is high enough to make them defrag. Where as a lot of people are at like 40% or well under. With mine being at 97-98%... is there any good way to defrag them all at once, rather than running this method one drive at a time? I understand this can take many days to run, per disk. Just curious what the best approach or method would be.
  15. I don't know much about ffmepg commands. By much, I mean nothing at all. How do I increase -max_muxing_queue_size from whatever it's defaulted too in unmanic to something like 1024? Every once in a while I have a few files that fail and everything I google says to increase the mux queue size to at least 1024. I see the example for the ffmepg under the advance tab... but I don't want to change anything else in my settings (like output file location, etc...) I'm scared I'll mess something up.
  16. No issues... Just wanted to thank you for continuing your development of this app. I'm currently refusing to use it on any of my 4k content as most of it is remux and I do not want to lose an ounce of quality. But using it on my Kids Movies library for example... god sent. Do you ever plan on giving us more control on the actual transcoding functions? I have no idea how to use ffmpeg commands, but I am familiar with handbrakes video settings. I love having the ability to select things like H.265 10-bit or 12-bit. RF settings, framerate adjustments, etc. Any plans on giving us the ability to chose 8-bit,10-bit, or even 12-bit encoding, quality control, or anything of that nature? Thanks again.
  17. So is this anything like the docker unmanic? Where it will scan your libraries, and automatically convert any file that isn't a specific format? Like make all my movies x265 .mkv files? If so, has anyone used both dockers? Which one gives the best output in terms on video quality post transcoding? How does it handle transcoding HDR content?
  18. So how do I install this now via the community app's page? Any time I search for it, it shows me it's part of a different repository, but there's no download/install button. I had to reinstall all of my dockers, and that's the only one I'm missing
  19. Hi, I have some 4,000 movies on my Plex server. I've never given them their own folder. They're just simply in my Movies folder. Knowing that in order for radarr to function properly, each movie needs to have it's own folder within my movies folder... is there an easy or simple way to automate the creation and moving of each file into it's own subfolder? I ask before I'm trying to use bazarr for subtitles. Obviously it works with TV Shows/Sonarr... but I need to figure this out for radarr.
  20. Ok, catch up. on my windows 10 machine, I was about to use OpenSSL to create a crt and key file. I then ran the following in my terminal: docker run -d -p 443:443 --name registry -v C:/localhub/certs:/certs -v C:/localhub/registry:/var/lib/registry -e REGISTRY_HTTP_ADDR=0.0.0.0:443 -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/local.crt -e REGISTRY_HTTP_TLS_KEY=/certs/local.key registry registry container created. did my tags and my pushes. now when I go into Unraid > Docker > Add container, I use my plex template and for repository I put in <*windows 10 ip/plex*> and I get the error that the cert for *IP* can’t be validated because it contains no IP SANs. any clue what that means and how to resolve it?
  21. I’ll try to keep this as short as possible. my Unraid server and my windows 10 machine are on the exact same network. I don’t have internet where I live so I use my phones mobile hotspot. i downloaded docker for windows, installed no issue. downloaded and set up registry. I pulled linuxserver/plex. I then tagged it as localhost:5000/my-plex and then pushed how do I tell Unraid to pull from my local registry? I changed the daemon on my win 10 to make localhost:5000 an insecure registry but Unraid still won’t because it says it’s getting an http response. thanks!
  22. I'm using a 24 bay 4U chassis, where everything plugs into 3x LSI 9211-8i. Every single hard drive and SSD I have plugged into the backplane, all shows up as SATA 3.x 6.0Gb/s (Current: 6.0Gb/s), except for one. My cache drive. It's a Crucial MX300 1050GB SSD. In unraid it shows SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s). Ive tried different cables, and different spots in the case. But no matter what, it's currect id 3.0Gb/s. Is there a way to set it to 6.0Gb/s?
  23. Any way I could get some help installing/configuing bw_plex. I don't understand what I need to do to get it up and running. I have the ip set to http://192.168.0.3:32400 (as that's my unraids server) I have the Media path set to my Plex Media Library Parent folder (/mnt/user/MediaPlex). And I grabbed the Plex Token from my Preferences.xml for my PMS (the PlexOnlineToken). Every time I start up the docker, it just shuts down almost instantly. Here's what I pull from the log. 2020-06-20 23:55:34,984 :: bw_plex :: INFO :: __init__.py:168 :: Using bw_plex version 0.1.1.dev89+g98269f7.d20200524 2020-06-20 23:55:34,985 :: bw_plex :: INFO :: __init__.py:169 :: default folder set to /config 2020-06-20 23:55:35,544 :: bw_plex :: INFO :: plex.py:1390 :: Added signal handler. 2020-06-20 23:55:35,546 :: bw_plex :: DEBUG :: misc.py:572 :: Getting hashtable 2020-06-20 23:55:35,609 :: bw_plex :: INFO :: misc.py:658 :: Loading existing files in db 2020-06-20 23:55:37,970 :: bw_plex :: DEBUG :: misc.py:587 :: Files in the hashtable Traceback (most recent call last): File "/app/bw_plex/bin/bw_plex", line 11, in <module> sys.exit(fake_main()) File "/app/bw_plex/lib/python3.6/site-packages/bw_plex/cli.py", line 24, in fake_main real_main() File "/app/bw_plex/lib/python3.6/site-packages/bw_plex/plex.py", line 1401, in real_main File "/app/bw_plex/lib/python3.6/site-packages/click/core.py", line 829, in __call__ return self.main(*args, **kwargs) File "/app/bw_plex/lib/python3.6/site-packages/click/core.py", line 782, in main rv = self.invoke(ctx) File "/app/bw_plex/lib/python3.6/site-packages/click/core.py", line 1259, in invoke return _process_result(sub_ctx.command.invoke(sub_ctx)) File "/app/bw_plex/lib/python3.6/site-packages/click/core.py", line 1066, in invoke return ctx.invoke(self.callback, **ctx.params) File "/app/bw_plex/lib/python3.6/site-packages/click/core.py", line 610, in invoke return callback(*args, **kwargs) File "/app/bw_plex/lib/python3.6/site-packages/bw_plex/plex.py", line 1306, in watch click.echo('Watching for media on %s' % PMS.friendlyName) AttributeError: 'NoneType' object has no attribute 'friendlyName' Am I missing something? Please help. Thanks!
  24. Hey guys, I'm having some issues with my MineOS install and I'm not really sure what the problem is. I installed MineOS docker. used all default settings. Set to bridge mode, my server is set to port 25565. But I can not connect to it (the server). I can connect to MineOS's UI without issues. It sees and allows me to manage my server without issue, but when I or anyone else tries to connect to it, the connection is refused. To me this sounds like a port related issue. But even on the same local network, I can't seem to find it. For the sake of this testing, I'm simply doing port forwarding on my modem so that it redirects all traffic on 25565 to my unraid servers ip:25565 Error: Failed to connect to the server Java.net.ConnectException: Connection refused: no further information In my console in MineOS, it says: [Query Listener #1/INFO]: Query running on localhost:25565 thanks guys