casperse

Hi All I am trying to setup to separate IP's with different ISP's/Gateways (NIC's) that I can select for my dockers? eth0 IP: 192.168.0.6/24 Gateway ISP1: 102.168.0.1/24 (Unifi USG3 router) eth1 IP: 192.168.0.7/24 Gateway ISP2: 192.168.0.18 (Pfsense VM running on Unraid) But after separating them I got into a lot of trouble with my Dockers which sofar have used ISP1 and kept pointing to 192.168.0.6? Is this possible using the Unraid UI for LAN settings? Current IP configuration: I tried splitting them by disabling bonding and removing eth1 and then adding static IP's to each of the NIC's with different gateways? That really messed things up, and I had to restore my "network.cfg" on my flash drive from a backup to get things working again Is it the routing tables I need to define? It would also be great to have a secondary gateway definition in case the primary ISP went down? - But that is not a priority Right now I would just like to get my new ISP setup for UNRAID dockers Thanks Casperse

I just changed it to a value below 1mio and then it worked! :-)

Hi Great plugin! I just tried to change the value: But when I look at the right side its not changed in the tweak plugin And running the command: cat /proc/sys/fs/inotify/max_user_watches Shows that its still set to: 524288?

Hi All I have installed it 3 times and it stoppes around 80% been running for two days now and it just crashed Emby Hangs here: "Calculating movie statistics" Is there any files or changes that I have to make? I saw some forum post about a fix, but I guess that would be in the docker by now right?

Found a new useful powerful setting if you have a very large Plex/Media Library.... Install the Tweaks plugin and increase the: fs.inotify.max_user_watches You can read more about the problem here: LINK BTW: I would really like to hear from more power users about their tweaks and settings, please share if you have some tweaks or performance improvements

I think I found the solution but have no Idea on how to implement it in a docker/Unraid? https://forums.plex.tv/t/increase-the-number-of-directories-linux-can-monitor-notify/209156 Hmm increasing this in the Tweaks plugin? would that help Plex?

Hi All I have a solid system for a very long time but after encoding to RAM I am getting some problems once in a while some TV shows doesn't play and then later they play fine? Error log: [Transcoder] [eac3_eae @ 0x15422c0] EAE timeout! EAE not running, or wrong folder? Could not read '/tmp/pms-018fb146-d1c7-4f41-84cb-cae419d0ca06/EasyAudioEncoder/Convert to WAV (to 8ch or less)/e12d43b76d37f1d2-com-plexapp-android_7893-0-0.wav' I found this post? Anyone have a solution to this? (Just upgraded to 64GB RAM to use RAM for encoding) And only for TV never movies? so the tmp folder si working....

Ups didnt like that getting a Libvirt does not start error now....

Yes its on both? - which one should I delete Update I deleted the oldest file not updated on drive 7

Yes I can see that this is the libvirt I have disabled VM and I am running mover now, shouldn't that move the file to cache? (I have system prefer cache setting)

I think I will end up doing another default gateway on the same subnet... 192.168.0.1 --> ISP1 192.168.0.8 --> ISP2 That way I can manage everything on the same network and I can point Unraid to one ISP and the rest to the old one Any problems doing it this way? Would it be possible to have a secondary gateway if the first one goes down?

No its ok "appdata" just a misspelling here....

Update: This might not be related? But all this started after upgrading to a new bigger M.2 cache drive, from a 1TB to a 2TB drive Could this somehow be the problem? (I formatted it like the old one "btrfs encrypted") Recreated the docker image and re-installed all the dockers! Only the Apdata is copied back to the new cache drive Below removed this had nothing to do with the error! Focusing on testing Plex for my stability testing... I just did a small test by copying the Plex Apdata folder to a UAD SSD and did a install with the same user "docker profile" but pointing to the SSD for Apdata and then Plex started to work like it did before (Exactly the same files) now HW encoding for TV works it doesn't when running from the cache drive? - This is so weird, it's like all logic is out the window..... Again this might not be related and just me grasping at some point of error origin I have so far removed the latest added plugins: Custom Tab Dynamix File Integrity Dynamix Active Streams Server Layout

@jonp Yes I am "like many others" a Space invader fan 😊 - and moving from Synology I found many great plugin that helped me accomplish this But you are right I need to remove the non essential plugins! - problem is that many are now "mandatory" I guess if possible it would be better to move to dockers if I can find a similar application to replace the plugin I am now running in safe mode and have attached a new Diag file - hope the error is gone now! What to do next? - retracing and uninstalling every plugin, starting from the latest ones? (If you tell me where to look for this python error I can search for it after each reboot?) Again your help is much appreciated - hope we can find the source of this problem and kill it @trurl I have all my drive numbers in Unraid assigned to the corresponding numbers of my servers HD cases (Make it much simpler to find a failing drive) Drive one is a Un-Assigned Drive - so I dont spin up the array - was inspired by this post about seeding and ended up with this solution - another forum post ,(Drive 8 and 9 is temporary empty because I am slowly replacing all my 3TB drives with larger ones - So drive 8 and 9 was moved to a larger drive 6 and so on its slow but it works and it requires $ so it's a slow process 😉 ) plexzone-diagnostics-20200226-0809.zip

Thanks @trurl I added my logs to the first post in this thread: BTW: Just took my server apart to get the USB out and I did several disk check in windows all was fine no errors

My USB was placed inside a rackmount server in the middle of the motherboard - Safe place but hard to get to I did run several test and all was clean? My hope is that the logs above will give a hint to what might caused this....

Update: Following the error leading to the Nvidia plugin which apparently also located on the USB? I re-installed the plugin and rebooted the server, sofar it looks like everything is running again? Could this cause the loss of User shares? (I didn't know that the Nvidia plugin was such a big deal of the Unraid server, if this is the case?)

How to run this manually? or see the log? I currently have a very strange problem and it might be the USB? I had the user shares disappear! - I did manage to get a Diagnostic before rebooting if anyone would take a look I would be really happy

You might be right... just got this new error I think the Nvidia files is on the flash so that would make sense! How to check in Unraid a check command from the command line?

This really scares the shit out of me...... How can the user path be gone? Should I reboot the system? Seems my User shares disappeared? Starting and stopping the array didn't help.... Rebooting and hooping that will get my user shares back....

Hi All After replacing my cache with a large drive I have had problems with my dockers I then did a rebuild - deleted my old docker-file and downloaded and reinstalled all my Dockers But afterwards I see strange behaviour Dockers that will not start but seem to be running (Green arrow) Dockers that just stops? or Emby that was running perfect before just stops and give errors? (Didn't change anything) Here is my Diagnostic files I hope someone can help me! Your help is much appreciated this is so strange? Gone from a stabile system to a "GHOST IN THE MACHINE" My container size is 40G no where near that: plexzone-diagnostics-20200224-2209.zip

Hi All, I had this working before but not on Unraid :-) Could someone tell me how to read the log files from Plex in Tatulli? I have set the path like this: Path: /mnt/user/appdata/plex/Library/Application Support/Plex Media Server/Logs/ And in Tautulli So any input to what's missing is much welcome

I had moved my docker.img away from my cache (Replaced it for a bigger cache drive) and after moving it all back I have no warnings anymore! :-) One thing that worries me, I mistakenly did run a "New Permissions" and included the appdata folder 😞 After a reboot it seems that all dockers are running okay - should I be worried? and what can I do about it? (Appdata permission is not the same)

Hi Everyone Unraid is great and I am like many others using my Unraid server for Plex (And of course other things) So I would really like to collect all the tweaks and "Hack" done by others to increase performance of large Media servers doing transcoding First just to get the "normal" recommendation listed: Appdata on cache drive (Fast as possible - SSD/M2) HW encoding using Unraid Nvidia plugin + GPU Structure of media in each folder/optimize files for transcoding? Specific Unraid tweaks: Moving transcoding to RAM (Update better guide for doing this) DB optimize over time (Mostly Plex not Emby) - people with large collection run this even if the DB is not corrupt? And afterwards should load much faster? https://support.plex.tv/articles/201100678-repair-a-corrupt-database/ https://hub.docker.com/r/nouchka/sqlite3/dockerfile/ Move the sqlite3 db file into a ramdisk? Link from Reddit - I guess it would just be a matter of copying to /temp? (If you already have your Appdata on M.2 then might not be big difference) Use direct /cache/ path: Big thanks to @mgutt for sharing this! (If you have space then adding Appdata/Docker.img really makes a difference!) What other things or tips do you have to speed things up? Speed up the UI? have anyone tried to move the DB to RAM? and did it help? Looking forward to getting some input from the power users! 👍 and updating this post with new things! Thanks for a really great forum with so many help-full people (I placed this post here because it should not be about the dockers but things around it and Unraid, please move it if you find a better place for it!)

So it seem to be working now! 😊 One questions... The unpackerr creates a new folder side by side with the existing folder like this: Directory A Directory A_unpackerred/Directory A/file A Is this how it should be? After Radarr/Sonarr/Lidarr moves the file will it then be deleted? (If the file is something they accept! not iso etc.) Again thanks for creating this! - Really love to disable the other built in-unpackers