JustinChase

I tried installing that plugin 3 times, but had ZERO luck. I downloaded the python v26 and v27 (I think, they are the only 2 offered on the plugin page), but after installing, neither one showed as a plugin in deluge. Oh well, it'd be nice to have it work, but I have probably spent 5 times more time trying to automate this, than what it would take to just do it manually every time. I'll just set it up in Deluge again, in the normal settings, and maybe one day it will just start working properly for me. thanks for the guidance.

I am using binhex's sonarr and deluge dockers. What I'm trying to do is have a torrent automatically delete once a seeding ratio has been reached. Setting the seed ration in the indexer setup in Sonarr seems to pause the torrent in deluge, but does not delete it. Setting the seed ratio in deluge also pauses it, even though I have the box checked for remove, it doesn't remove. Am I doing it wrong, or is this just not possible?

I've been struggling to get Jackett working with Sonarr. I finally found the final bit that got me working (api location). Here are the settings that worked for me when adding Torznab to Sonarr. Notice the api location I had to change to get it working (FINALLY!!!) I hope it helps others searching for a solution that works. FYI, I didn't set up any proxy in Jackett

Nope, I sure didn't. I've fixed, and all is well again. Thanks again for the prompt support, and for all you contribute!

I'm not sure what happened, i was sure I edited them out. i replaced log with edited credentials, and am changing now.

I am having issues with accessing the GUI. I deleted the old container and used Community Applications to install fresh. I've attached the log, which seems to show all is well, but I just cannot access the GUI. supervisord.log

yeah, i grabbed your deluge and sab containers right after docker was added to unraid. I was unaware you'd expanded the template, and I don't know how to get the new template, or update the one I have. I'd like to get the newest, but don't want to 'start over' having to reset everything. I tested sab with the name servers in place, and it didn't work, removed them and it worked, added them and it didn't work, and finally removed them to get it to work. After reading this, I added them back again to triple check before writing this, and now it is working with the name servers in there. I don't think removing the /config path was the issue, since it wasn't even saving the config, and the container was actually getting orphaned until I found and removed the duplicate. Then it saved and started, but i still couldn't get to the GUI. Maybe it was just taking a long time. Regardless, it's working, with the name servers, and downloading a small file as a test (I have really terribly slow internet). If you know a good/easy way to get my template up to date with your latest, I'd like to do that. i wonder if there is any way to do that automatically, or at least get notified when you make updates, since I had no idea until you said so. Thanks again for all you do, and for your help. ***Forgot to ask; what is best practice for handling both sab and deluge having port 8118 in the template. Once one is saved, the next give an error because that port is already used. I gather that port is for privoxy, but I'm not sure how best to handle the conflict. I assume just assign a container port, but it seems odd to force us to figure this out, since both templates have 8118 as the container template by default also.

I've been working on this for a while, mostly just cleaning up/reorganizing the keys, port and paths to match what deluge has, so it was easier to compare (I wish there was an easy way to simply re-organize the existing entries). I added yes|no as default to fields where that's the option and true|false to the debug field, and all those fields show an arrow button to let you just pick. I'm not sure why the sabnzbdvpn container includes these keys, but delugevpn doesn't VPN_OPTIONS NAME_SERVERS UMASK PUID PGID ADDITIONAL_PORTS I have no idea what would go in VPN_OPTIONS, and it remains blank I removed the entry in NAME_SERVERS I left UMASK, PUID & PGID with the values that were there I have no need for additional ports, so it remains blank I also re-created Host Port 3 to use 8100, so it wasn't the same as deluge, and I didn't have to change just the container path. when I saved, I kept getting a duplicate /config error I finally clicked on the show more settings line in blue at the bottom and found a hidden container path, and once I removed that, the container saved properly and started. Viola! it's working again. TLDL; remove the NAME_SERVERS list from that field and all works again. If there is some reason those need to be there, I'd love to know, but as of now, the GUI loads, and it seems to work fine again. I don't know any way to confirm it's actually using the VPN with this change, but I do have it enabled, and per binhex, it will not load GUI if VPN isn't connected, so I assume it's all good now.

Interesting, but why is binhex-delugevpn working just fine? I believe I have them set the same. Well, other than having to change one of them to use a different port, since, for some reason, they are both setup to use port 8118, which conflicts when I don't change one to 9118. The don't have all the same settings options, but those that are in both docker setups seem to be setup the same on my system, and SAB was working fine a few weeks ago (the last time I checked on it). I literally copied the openvpn files from deluge to sab as a test, so they should be the exact same files in both folders. This tells me it's not my ISP, nor my router. Not sure what else it could be. Finally; would it be possible for you to put a link to that FAQ in the first post of your docker threads on unRAID? I literally spent an hour looking and could not find that FAQ. Thanks again

I'm sorry to have to post this here, I know I've asked before, but cannot fine that post, nor my answer. SABnzbdVPN stopped working, it just won't connect to the container. I suspect it has to do with PIA endpoint, but I cannot, for an hour of searching, find where or how to change it. my DelugeVPN still works fine, so maybe that's not the issue at all. Log file is here. I'm stuck on what to try to get it working again. 2020-05-06 15:14:07,097 DEBG 'start-script' stdout output: Wed May 6 15:14:07 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:14:07 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:14:07 2020 UDP link local: (not bound) Wed May 6 15:14:07 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:15:07,021 DEBG 'start-script' stdout output: Wed May 6 15:15:07 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:15:07 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:15:07 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:15:07 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:15:07 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:15:12,022 DEBG 'start-script' stdout output: Wed May 6 15:15:12 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:15:12 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:15:12 2020 UDP link local: (not bound) Wed May 6 15:15:12 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:16:12,260 DEBG 'start-script' stdout output: Wed May 6 15:16:12 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:16:12 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:16:12 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:16:12 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:16:12 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:16:17,260 DEBG 'start-script' stdout output: Wed May 6 15:16:17 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:16:17 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:16:17 2020 UDP link local: (not bound) Wed May 6 15:16:17 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:17:17,038 DEBG 'start-script' stdout output: Wed May 6 15:17:17 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:17:17 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:17:17 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:17:17 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:17:17 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:17:22,039 DEBG 'start-script' stdout output: Wed May 6 15:17:22 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:17:22 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:17:22 2020 UDP link local: (not bound) Wed May 6 15:17:22 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:18:22,268 DEBG 'start-script' stdout output: Wed May 6 15:18:22 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:18:22 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:18:22 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:18:22 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:18:22 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:18:27,269 DEBG 'start-script' stdout output: Wed May 6 15:18:27 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:18:27 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:18:27 2020 UDP link local: (not bound) Wed May 6 15:18:27 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:19:27,390 DEBG 'start-script' stdout output: Wed May 6 15:19:27 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:19:27 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:19:27 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:19:27 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:19:27 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:19:32,391 DEBG 'start-script' stdout output: Wed May 6 15:19:32 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:19:32 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:19:32 2020 UDP link local: (not bound) Wed May 6 15:19:32 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:20:33,094 DEBG 'start-script' stdout output: Wed May 6 15:20:33 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:20:33 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:20:33 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:20:33 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:20:33 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:20:38,095 DEBG 'start-script' stdout output: Wed May 6 15:20:38 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:20:38 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:20:38 2020 UDP link local: (not bound) Wed May 6 15:20:38 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:21:38,291 DEBG 'start-script' stdout output: Wed May 6 15:21:38 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:21:38 2020 SIGHUP[soft,ping-restart] received, process restarting 2020-05-06 15:21:38,291 DEBG 'start-script' stdout output: Wed May 6 15:21:38 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:21:38 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:21:38 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:21:43,292 DEBG 'start-script' stdout output: Wed May 6 15:21:43 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:21:43 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:21:43 2020 UDP link local: (not bound) Wed May 6 15:21:43 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:22:43,907 DEBG 'start-script' stdout output: Wed May 6 15:22:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:22:43 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:22:43 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:22:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:22:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:22:48,908 DEBG 'start-script' stdout output: Wed May 6 15:22:48 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:22:48 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:22:48 2020 UDP link local: (not bound) Wed May 6 15:22:48 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:23:48,229 DEBG 'start-script' stdout output: Wed May 6 15:23:48 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:23:48 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:23:48 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:23:48 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:23:48 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:23:53,230 DEBG 'start-script' stdout output: Wed May 6 15:23:53 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:23:53 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:23:53 2020 UDP link local: (not bound) Wed May 6 15:23:53 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:24:53,072 DEBG 'start-script' stdout output: Wed May 6 15:24:53 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:24:53 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:24:53 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:24:53 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:24:53 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:24:58,073 DEBG 'start-script' stdout output: Wed May 6 15:24:58 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:24:58 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:24:58 2020 UDP link local: (not bound) Wed May 6 15:24:58 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:25:58,240 DEBG 'start-script' stdout output: Wed May 6 15:25:58 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:25:58 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:25:58 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:25:58 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:25:58 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:26:03,241 DEBG 'start-script' stdout output: Wed May 6 15:26:03 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:26:03 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:26:03 2020 UDP link local: (not bound) Wed May 6 15:26:03 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:27:03,874 DEBG 'start-script' stdout output: Wed May 6 15:27:03 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:27:03 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:27:03 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:27:03 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:27:03 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:27:08,874 DEBG 'start-script' stdout output: Wed May 6 15:27:08 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:27:08 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]92.123.7.113:1198 Wed May 6 15:27:08 2020 UDP link local: (not bound) Wed May 6 15:27:08 2020 UDP link remote: [AF_INET]92.123.7.113:1198 2020-05-06 15:28:03,935 WARN received SIGTERM indicating exit request 2020-05-06 15:28:03,935 DEBG killing watchdog-script (pid 159) with signal SIGTERM 2020-05-06 15:28:03,935 INFO waiting for start-script, watchdog-script to die 2020-05-06 15:28:03,982 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 140591226644416 for <Subprocess at 140591226643744 with name watchdog-script in state STOPPING> (stdout)> 2020-05-06 15:28:03,982 DEBG fd 15 closed, stopped monitoring <POutputDispatcher at 140591226687152 for <Subprocess at 140591226643744 with name watchdog-script in state STOPPING> (stderr)> 2020-05-06 15:28:03,982 INFO stopped: watchdog-script (terminated by SIGTERM) 2020-05-06 15:28:03,982 DEBG received SIGCHLD indicating a child quit 2020-05-06 15:28:03,983 DEBG killing start-script (pid 158) with signal SIGTERM 2020-05-06 15:28:04,983 DEBG fd 8 closed, stopped monitoring <POutputDispatcher at 140591226870128 for <Subprocess at 140591226869024 with name start-script in state STOPPING> (stdout)> 2020-05-06 15:28:04,983 DEBG fd 10 closed, stopped monitoring <POutputDispatcher at 140591226643648 for <Subprocess at 140591226869024 with name start-script in state STOPPING> (stderr)> 2020-05-06 15:28:04,983 INFO stopped: start-script (terminated by SIGTERM) 2020-05-06 15:28:04,983 DEBG received SIGCHLD indicating a child quit Created by... ___. .__ .__ \_ |__ |__| ____ | |__ ____ ___ ___ | __ \| |/ \| | \_/ __ \\ \/ / | \_\ \ | | \ Y \ ___/ > < |___ /__|___| /___| /\___ >__/\_ \ \/ \/ \/ \/ \/ https://hub.docker.com/u/binhex/ 2020-05-06 15:40:40.480612 [info] System information Linux cbdab7af0882 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux 2020-05-06 15:40:40.505757 [info] PUID defined as '99' 2020-05-06 15:40:40.532177 [info] PGID defined as '100' 2020-05-06 15:40:40.565229 [info] UMASK defined as '000' 2020-05-06 15:40:40.588270 [info] Permissions already set for volume mappings 2020-05-06 15:40:40.617154 [info] VPN_ENABLED defined as 'yes' 2020-05-06 15:40:40.649759 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/CA Montreal.ovpn 2020-05-06 15:40:40.690789 [info] VPN remote line defined as 'remote ca.privateinternetaccess.com 1198' 2020-05-06 15:40:40.715570 [info] VPN_REMOTE defined as 'ca.privateinternetaccess.com' 2020-05-06 15:40:40.742453 [info] VPN_PORT defined as '1198' 2020-05-06 15:40:40.770003 [info] VPN_PROTOCOL defined as 'udp' 2020-05-06 15:40:40.795206 [info] VPN_DEVICE_TYPE defined as 'tun0' 2020-05-06 15:40:40.818243 [info] VPN_PROV defined as 'pia' 2020-05-06 15:40:40.840904 [info] LAN_NETWORK defined as '192.168.1.0/24' 2020-05-06 15:40:40.863765 [info] NAME_SERVERS defined as '209.222.18.222,37.235.1.174,1.1.1.1,8.8.8.8,209.222.18.218,37.235.1.177,1.0.0.1,8.8.4.4' 2020-05-06 15:40:40.886486 [info] VPN_USER defined as 'p6682965' 2020-05-06 15:40:40.911067 [info] VPN_PASS defined as 'sj6EtpzkL64Lz0T2C4yCGwJN' 2020-05-06 15:40:40.934049 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS) 2020-05-06 15:40:40.956802 [info] ENABLE_PRIVOXY defined as 'no' 2020-05-06 15:40:40.982038 [info] ADDITIONAL_PORTS defined as '9081' 2020-05-06 15:40:41.014683 [info] Deleting files in /tmp (non recursive)... 2020-05-06 15:40:41.036782 [info] Starting Supervisor... 2020-05-06 15:40:41,262 INFO Included extra file "/etc/supervisor/conf.d/sabnzbdvpn.conf" during parsing 2020-05-06 15:40:41,262 INFO Set uid to user 0 succeeded 2020-05-06 15:40:41,264 INFO supervisord started with pid 11 2020-05-06 15:40:42,266 INFO spawned: 'start-script' with pid 156 2020-05-06 15:40:42,267 INFO spawned: 'watchdog-script' with pid 157 2020-05-06 15:40:42,267 INFO reaped unknown pid 12 2020-05-06 15:40:42,279 DEBG 'start-script' stdout output: [info] VPN is enabled, beginning configuration of VPN 2020-05-06 15:40:42,279 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-05-06 15:40:42,279 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs) 2020-05-06 15:40:42,318 DEBG 'start-script' stdout output: [info] Default route for container is 172.17.0.1 2020-05-06 15:40:42,321 DEBG 'start-script' stdout output: [info] Adding 209.222.18.222 to /etc/resolv.conf 2020-05-06 15:40:42,324 DEBG 'start-script' stdout output: [info] Adding 37.235.1.174 to /etc/resolv.conf 2020-05-06 15:40:42,326 DEBG 'start-script' stdout output: [info] Adding 1.1.1.1 to /etc/resolv.conf 2020-05-06 15:40:42,329 DEBG 'start-script' stdout output: [info] Adding 8.8.8.8 to /etc/resolv.conf 2020-05-06 15:40:42,332 DEBG 'start-script' stdout output: [info] Adding 209.222.18.218 to /etc/resolv.conf 2020-05-06 15:40:42,335 DEBG 'start-script' stdout output: [info] Adding 37.235.1.177 to /etc/resolv.conf 2020-05-06 15:40:42,337 DEBG 'start-script' stdout output: [info] Adding 1.0.0.1 to /etc/resolv.conf 2020-05-06 15:40:42,340 DEBG 'start-script' stdout output: [info] Adding 8.8.4.4 to /etc/resolv.conf 2020-05-06 15:40:43,096 DEBG 'start-script' stdout output: [info] Docker network defined as 172.17.0.0/16 2020-05-06 15:40:43,099 DEBG 'start-script' stdout output: [info] Adding 192.168.1.0/24 as route via docker eth0 2020-05-06 15:40:43,100 DEBG 'start-script' stdout output: [info] ip route defined as follows... -------------------- 2020-05-06 15:40:43,101 DEBG 'start-script' stdout output: default via 172.17.0.1 dev eth0 2020-05-06 15:40:43,101 DEBG 'start-script' stdout output: 172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.3 2020-05-06 15:40:43,101 DEBG 'start-script' stdout output: 192.168.1.0/24 via 172.17.0.1 dev eth0 2020-05-06 15:40:43,102 DEBG 'start-script' stdout output: -------------------- 2020-05-06 15:40:43,106 DEBG 'start-script' stdout output: iptable_mangle 16384 2 ip_tables 24576 5 iptable_filter,iptable_nat,iptable_mangle 2020-05-06 15:40:43,106 DEBG 'start-script' stdout output: [info] iptable_mangle support detected, adding fwmark for tables 2020-05-06 15:40:43,120 DEBG 'start-script' stdout output: [info] Adding additional incoming port 9081 for eth0 2020-05-06 15:40:43,140 DEBG 'start-script' stdout output: [info] Adding additional outgoing port 9081 for eth0 2020-05-06 15:40:43,147 DEBG 'start-script' stdout output: [info] iptables defined as follows... -------------------- 2020-05-06 15:40:43,148 DEBG 'start-script' stdout output: -P INPUT DROP -P FORWARD DROP -P OUTPUT DROP -A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8080 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 8090 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 8090 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 9081 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --sport 9081 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT -A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8080 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 8090 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 8090 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --dport 9081 -j ACCEPT -A OUTPUT -o eth0 -p tcp -m tcp --sport 9081 -j ACCEPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -o tun0 -j ACCEPT 2020-05-06 15:40:43,149 DEBG 'start-script' stdout output: -------------------- 2020-05-06 15:40:43,150 DEBG 'start-script' stdout output: [info] Starting OpenVPN... 2020-05-06 15:40:43,176 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 WARNING: file 'credentials.conf' is group or others accessible 2020-05-06 15:40:43,176 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 2020-05-06 15:40:43,176 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:40:43,177 DEBG 'start-script' stdout output: [info] OpenVPN started 2020-05-06 15:40:43,180 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2020-05-06 15:40:43,182 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]23.206.172.19:1198 2020-05-06 15:40:43,183 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 UDP link local: (not bound) 2020-05-06 15:40:43,183 DEBG 'start-script' stdout output: Wed May 6 15:40:43 2020 UDP link remote: [AF_INET]23.206.172.19:1198 2020-05-06 15:41:43,858 DEBG 'start-script' stdout output: Wed May 6 15:41:43 2020 [UNDEF] Inactivity timeout (--ping-restart), restarting Wed May 6 15:41:43 2020 SIGHUP[soft,ping-restart] received, process restarting Wed May 6 15:41:43 2020 WARNING: file 'credentials.conf' is group or others accessible Wed May 6 15:41:43 2020 OpenVPN 2.4.8 [git:makepkg/3976acda9bf10b5e+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jan 3 2020 Wed May 6 15:41:43 2020 library versions: OpenSSL 1.1.1d 10 Sep 2019, LZO 2.10 2020-05-06 15:41:48,858 DEBG 'start-script' stdout output: Wed May 6 15:41:48 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Wed May 6 15:41:48 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]23.206.172.19:1198 Wed May 6 15:41:48 2020 UDP link local: (not bound) Wed May 6 15:41:48 2020 UDP link remote: [AF_INET]23.206.172.19:1198

I deleted all data, and am just rebuiling now, while I use the server, but am not moving files around this time. We'll see how it goes. If any issues, I'll try the export function next time. I read all the descriptions of all the buttons, and there was no obvious 'rebuild' function I could decipher. thanks again for the help.

Ah, that helps; thank you! doesn't make as much sense as being in the log folder on the plugin page, but now I know. it actually shows tons of warnings and errors about SHA256 mismatches and/or missing files. I may have been doing some moving of files when the process was originally running, so maybe that's the issue. It took about a day to run, and I'm not sure when I can not use the server for that long to run it again, but I'll try to do that soon, and have it re-evaluate all files during that time and see if errors continue. I just installed a brand new parity drive and system drive, both of which passed the preclear, so I'd be surprised if there was bit rot happening already. I guess we'll see soon enough. thanks again for your help.

I couldn't find any "log tab", but there is a "log files" folder on the plugin page. The only thing in that folder is a file called duplicate_file_hashes.txt That only lists all the duplicate hashes it found, but nothing about any errors, or help figuring out which file triggered the error.

If I can't find out which file(s) have gone bad, I'm not sure this really helps. It only causes me stress knowing something is 'broke'. Is there a way to know what's not right? Or should I just uninstall the plugin to not have the stress of knowing there is an un-fixable problem with my data?

I got a server popup yesterday with the following error... found 1 file with sha256 hash key mismatch no more information, and I can't find any errors or more information in the plugin page. how do I know what the issue is and how to fix it? thanks

That makes sense, thanks for letting me know. Could you please add this to the first post, because I'll forget in a year or 2 when I try to do this again, and I always look to the first post for instructions, which will save me having to search the thread to find this tidbit. Thanks again, the script works great (once I get it to run).

I'm having the same issue today. I have this script on my flash drive, but get permissions denied error also. root@media:/boot/scripts# unRAIDFindDuplicates.sh -v -bash: ./unRAIDFindDuplicates.sh: Permission denied What am I doing wrong, how to fix?

I am 65% of the way through the parity swap procedure, and when I went to the Array Operation tab to see the progress I had this error on that screen... Fatal error: Uncaught Error: Call to undefined function parse_file() in /usr/local/emhttp/plugins/dynamix.s3.sleep/Sleep.php:18 Stack trace: #0 /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(520) : eval()'d code(549): include() #1 /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(520): eval() #2 /usr/local/emhttp/plugins/dynamix/template.php(60): require_once('/usr/local/emht...') #3 {main} thrown in /usr/local/emhttp/plugins/dynamix.s3.sleep/Sleep.php on line 18 I had just installed the preclear plugin through the community applications plugin, but have not started any preclear, or done anything else since installing the plugin. I'm not sure this is a sleep plugin problem, I'm only reporting here because it's the only thing mentioned in the error.

I upgraded to rc7, then 8, and now the final version. in all 3 versions, I've lost the USB controller in my VM. I un-selected the (other PCI devices) rebooted the VM, then stopped, and re-selected it, and it still isn't being recognized (I can't use my keyboard in the VM). I saw some mention about changing the way devices are handled, but I don't follow unraid closely enough to know if this is my problem, or something else. i've posted my diagnostics. i didn't see anything obvious in there, but maybe one of you is able to see what happened and point me to a solution. Thanks media-diagnostics-20190511-1957.zip

You've made my point, convert SELECTED into reference. there's no way to convert MARKED into reference. Also, you can only send one of them to the recycle bin (marked or selected; not both). As I said you cannot perform all actions on marked AND selected, which limits what one can do.

the problem is that you can only delete selected, not marked files. however, you can't invert the marked files to the reference files, so you can't always delete the files you want. you can't mark the selected files as another example. The combinations available just don't let you "pick" what you want to delete. The point (for me) for finding duplicates is to delete the duplicate files, but the methods offered don't let me mark or select (pick) the right files easily. If you could delete selected instead of marked, that would help, but if you could just act on either marked or selected the same way, I could get done what I want.

I really like your docker, in general, but in use, it causes me much frustration. PLEASE allow one to perform all actions on selected or marked. In practice, there is no good way to get a list selected and delete that selection. inverting the marking doesn't allow you to pick the reference files, so when one tries to actually do something, the options available just aren't adequate to allow me to do what I need.

I'm suddenly not having success running this. I've tried to scatter the files off of one drive to others, and after an hour of work, it gives a message such as this one... skipping:deletion:(rsync command was flagged):(/mnt/disk2/video/Racing/Formula 1/2012/Formula 1 - 2012 - Round 17 - India - Race.mkv) Why is it skipping the deletion? It seems I now have these files on both drives, but they show as one file when I view thru user shares. I tried to move them with MC in putty, but that just hangs MC. I then tried to gather the files to a disk, hoping that would remove them from the disk I'm trying to clear, but that is what actually generated the error above. I don't have any idea at this point how to consolidate these files. I've tried several times, and the files don't move off of the disk I'm trying to clear. Is there some way to reset the program and get it to actually move then delete the files?

Thank you binhex! I really do appreciate your help with everything. Sorry I didn't check the FAQ first, a normal search didn't help. I'll check the FAQ first next time. I've updated all containers to match up all paths, and the settings inside all the dockers to match the updates, so I assume I should be good now/again.

I'm having lots of issues with renaming/moving completed downloads now. I suspect I've not gotten the new SAB install finished correctly, since I dont' think I've changed Sonarr lately, and this all started after I had to reinstall SAB. Now, after downloading an nzb, SAB shows it's completed, no errors. Sonarr shows the show still in the download queue as if it's still downloading. I can live with this, but I'm also seeing garbage names of files, and they are not being moved to the correct location any longer. I've gone thru and checked all the settings I can think of related to this, and all seems well. I'm not sure if anyone else has had similar issues, or has an idea where to try to resolve this, but I'm stuck and frustrated at this point. Here is a shot showing the completed downloads in SAB... Here are my SAB settings that I think relate to this. I also have all 3 sorting options unchecked, so SAB should not be touching these. Here is a shot of a bunch of new Game of Thrones downloads that recently finished, notice the names of the files And another screenshot showing the folder location it was moved to... Here are my Sonarr renaming settings (which still seem to work just fine for Deluge)... Here are the completed NZB files as they display in Sonarr as unfinished...