[email protected]

I am getting EAE errors on my console. No idea what is going on and a lot of folks who had this issue had it in 2017 from some other sort of issue. Running the current versions of everything (6.8.2 Nvidia; current docker; etc.)

Still no luck. my phone, for example, connects and gets an address and the DNS server. But I can't ping it from the interface and it doesn't actually work. I've tried all of the different variations of server to server, lan to lan, tunneled access, etc. I just want to be able to log in and have it effectively act as if i was at home. But this gives no feedback and I have no idea what is going wrong.

I am having the same problems others have had with handshakes. 10.0.1.2 is pi-hole/unbound running on a DietPi VM. Tunnel setup: I Peer setup: Unifi setup:

Mainstreaming the nvidia build Snapshots

OK - a couple of questions. 1. What do I need to do to get my nvidia card working with it? 2. The Letsencrypt reverse proxy doesn't want to work for me. I get bad gateway errors. shinobi.subdomain.conf server { listen 443 ssl; listen [::]:443 ssl; server_name shinobi.*; include /config/nginx/ssl.conf; client_max_body_size 0; location / { include /config/nginx/proxy.conf; proxy_pass http://10.0.3.100:8080; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection 'upgrade'; proxy_set_header Host $host; } } No idea why it isn't working

So I just installed it and seemed to work (running pi-hole). I wonder if it is because I do have backup cloudflare dns servers listed? Any way to monitor which DNS everything goes through?

Getting the following errors (running calibre, shinobi, and ubooquity right now): Server ready nginx: [warn] "ssl_stapling" ignored, host not found in OCSP responder "ocsp.int-x3.letsencrypt.org" in the certificate "/config/keys/letsencrypt/fullchain.pem" nginx: [warn] "ssl_stapling" ignored, host not found in OCSP responder "ocsp.int-x3.letsencrypt.org" in the certificate "/config/keys/letsencrypt/fullchain.pem" nginx: [alert] detected a LuaJIT version which is not OpenResty's; many optimizations will be disabled and performance will be compromised (see https://github.com/openresty/luajit2 for OpenResty's LuaJIT or, even better, consider using the OpenResty releases from https://openresty.org/en/download.html) Any ideas what is going on?

Getting this on a lot of settings pages: Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php(501) : eval()'d code on line 62 Any ideas what is causing it?

Hey - I started to setup OpenVPN, but Brave reports the certificate is no good: Your connection is not private Attackers might be trying to steal your information from 10.0.1.31 (for example, passwords, messages, or credit cards). Learn more NET::ERR_CERT_REVOKED ReloadHide advanced 10.0.1.31 normally uses encryption to protect your information. When Brave tried to connect to 10.0.1.31 this time, the website sent back unusual and incorrect credentials. This may happen when an attacker is trying to pretend to be 10.0.1.31, or a Wi-Fi sign-in screen has interrupted the connection. Your information is still secure because Brave stopped the connection before any data was exchanged. You cannot visit 10.0.1.31 right now because its certificate has been revoked. Network errors and attacks are usually temporary, so this page will probably work later. I realize I could just use a different browser, but obviously I would prefer to get this working. Any thoughts?

OK, so I can access my calibre docker through the reverse proxy. What I would like to be able to do is to also access the OPDS server that is builtin so I can download books on the road. Typically the address would be IPaddress:8080/opds; but right now I only have 80 and 443 port forwarded (and the webgui works fine there)

Finally got this working, I found manually making the changes in a good copy of the XML one at a time paid off and then pasting the whole thing in worked better (maybe some change was missing?) 2 cores on my E5 2650v2s weren't enough for decent performance, but 4 seems to be solid. I might up it to 6-8 eventually.

So I think I have it working with my X9 board. Apparently it won't work except through localhost for me. But lots of errors related to FANA and FANB which are two mid-chassis fans. FAN1 and FAN2 are the two CPU fans... Really I want to slow down the 80mm in back which are crazy loud.

So I installed this to control my fans since changing over to Noctuas. The fan log reads: 020-01-07 17:26:06 Starting Fan Control 2020-01-07 17:26:06 Setting fans to full speed Is that all that it can do? Without any fan control my Supermicro would spin up the fans to full speed and then stop in very short cycles. Never mind - I am running an X9DRi-LN4F+ and I saw that this supports only X10 and up motherboards.

Seems like I am not the only one for whom the thing won't convert using the standard setting? I just get a forever spinning circle on a tab called ePubJS Reader Also, when I access it on my iOS browser - some epubs will open in Books and some won't. No idea why.

Except that it doesn't seem to work. I set the web interface in the docker edit screen to 443 and it still maps to 8443.

Thanks for the video - definitely helpful. Would love to see a dnscrypt-proxy2 video as an adjacent to this one.

SInce I have it running in its own IP, how do I change the ports to be standard http/https ports? I've tried editing system.properties and the docker settings with no luck

So I currently have my router set to capture all outgoing port 53 requests and shuttle them over to pihole. Then I want pihole's upstream DNS server to be your dnscrypt docker which, I believe, then defaults to cloudflare? But when I try and enable the dnscrypt upstream, I don't have any DNS. Is my router pushing the requests back to the pi-hole instance in a loop? Any way to change the port that the dnscrypt docker is using to something like 5300?

Been reading through pages of this stuff... Noob to Unraid here. 6.7.0. I want to mount my Windows ReFS drive on my Unraid server to copy over my media folders, etc. I see it in the Unassigned Devices list, but when I click on Mount, it thinks for a second, and then shows Mount again rather than Unmount, so it seems like it isn't successfully doing it. Help would be appreciated. Let me know if any logs or whatever would be helpful.

Trying to install binhex-krusader from the Community Apps plugin. Any thoughts? SOLVED _ nameserver shenanigans; changed them to cloudflare and google and it works fine.