Fisherman Posted June 17, 2023 Share Posted June 17, 2023 5 hours ago, SimonF said: Can you provide output of the following removing password or remove the password line from ipmi.cfg and see if that loads? root@computenode:~# cat /boot/config/plugins/ipmi/fan.cfg FANCONTROL="disable" FANPOLL="6" FANIP="" HDDPOLL="18" HDDIGNORE="" HARDDRIVES="enable" root@computenode:~# cat /boot/config/plugins/ipmi/ipmi.cfg IPMISELD="disable" IPMIPOLL="180" NETWORK="enable" LOCAL="disable" IPADDR="192.168.1.241" USER="ADMIN" PASSWORD="XXXXX" DISP_SENSOR1="0" DISP_SENSOR2="0" LOADCFG="disable" IGNORE="" DIGNORE="" DASH="enable" DEVIGNORE="" DEVS="enable" OVERRIDE="disable" OBOARD="Supermicro" OCOUNT="0" OMODEL="9" root@computenode:~# thanks for looking into this. root@SERVER:~# cat /boot/config/plugins/ipmi/fan.cfg FANCONTROL="enable" FANPOLL="1" FANIP="" HDDPOLL="6" HDDIGNORE="SanDisk_SDSSDH32000G_181298800320,SanDisk_SDSSDH32000G_174645800932" HARDDRIVES="enable" FAN_FAN1234="1009" TEMP_FAN1234="99" FAN_FANA="1344" TEMP_FANA="4" TEMPHI_FANA="75" TEMPLO_FANA="30" FANMAX_FANA="64" FANMIN_FANA="16" TEMPHI_FAN1234="45" TEMPLO_FAN1234="35" FANMAX_FAN1234="58" FANMIN_FAN1234="29" root@SERVER:~# cat /boot/config/plugins/ipmi/ipmi.cfg IPMISELD="enable" IPMIPOLL="15" NETWORK="disable" LOCAL="enable" IPADDR="10.1.1.250" USER="xxx" PASSWORD="xxx" DISP_SENSOR1="4" DISP_SENSOR2="99" LOADCFG="disable" IGNORE="205,272,339,406,473,540,607,674,741,808,875,942,1411,1478,1545,1612,1679,1746,1813,1880,1947,2014,2081,2148,2215" DIGNORE="205,272,339,406,473,540,607,674,741,808,875,942,1076,1210,1277,1411,1478,1545,1612,1679,1746,1813,1880,1947,2014,2081,2148,2215" DASH="enable" DEVIGNORE="" DEVS="enable" OVERRIDE="disable" OBOARD="Supermicro" OCOUNT="0" OMODEL="10" DISP_SENSOR3="1344" DISP_SENSOR4="1009" Quote Link to comment
fleondelarosa Posted June 17, 2023 Share Posted June 17, 2023 5 hours ago, SimonF said: Can you provide output of the following removing password or remove the password line from ipmi.cfg and see if that loads? root@computenode:~# cat /boot/config/plugins/ipmi/fan.cfg FANCONTROL="disable" FANPOLL="6" FANIP="" HDDPOLL="18" HDDIGNORE="" HARDDRIVES="enable" root@computenode:~# cat /boot/config/plugins/ipmi/ipmi.cfg IPMISELD="disable" IPMIPOLL="180" NETWORK="enable" LOCAL="disable" IPADDR="192.168.1.241" USER="ADMIN" PASSWORD="XXXXX" DISP_SENSOR1="0" DISP_SENSOR2="0" LOADCFG="disable" IGNORE="" DIGNORE="" DASH="enable" DEVIGNORE="" DEVS="enable" OVERRIDE="disable" OBOARD="Supermicro" OCOUNT="0" OMODEL="9" root@computenode:~# Yes, it works! removing the password parameter in config file, makes visible the settings tab, BUT, the IPMI setting fields are disable and connection to my IPMI address failed. I have the /usr/local/emhttp/plugins/ipmi/include/ipmi_options.php with $netsvc === 'disable' and in ipmi_settings_fan.php under fan network option too, disable. In the past, those were needed for me to be able to see settings tab and edit the options, i have to do it with every server restart. Thanks in any case @SimonF, at least I see now the settings tab, I will continuos with the investigation, let me know if you have any other idea. Regards Quote Link to comment
Fisherman Posted June 17, 2023 Share Posted June 17, 2023 6 hours ago, SimonF said: Can you provide output of the following removing password or remove the password line from ipmi.cfg and see if that loads? root@computenode:~# cat /boot/config/plugins/ipmi/fan.cfg FANCONTROL="disable" FANPOLL="6" FANIP="" HDDPOLL="18" HDDIGNORE="" HARDDRIVES="enable" root@computenode:~# cat /boot/config/plugins/ipmi/ipmi.cfg IPMISELD="disable" IPMIPOLL="180" NETWORK="enable" LOCAL="disable" IPADDR="192.168.1.241" USER="ADMIN" PASSWORD="XXXXX" DISP_SENSOR1="0" DISP_SENSOR2="0" LOADCFG="disable" IGNORE="" DIGNORE="" DASH="enable" DEVIGNORE="" DEVS="enable" OVERRIDE="disable" OBOARD="Supermicro" OCOUNT="0" OMODEL="9" root@computenode:~# Removing the PASSWORD line from ipmi.cfg worked, plugin and config page are loaded / running. 1 Quote Link to comment
fleondelarosa Posted June 17, 2023 Share Posted June 17, 2023 My mistake, i didn´t check that notifications and fan control has to be disable to be able to edit. Thanks @SimonF 1 Quote Link to comment
fleondelarosa Posted June 17, 2023 Share Posted June 17, 2023 Fan control is stopped, i don´t get it on, i looked everywhere. I used always this command with every server restart, is it still needed, right? curl -o '/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' -L 'https://raw.githubusercontent.com/lucasteligioridis/IPMI-unRAID/master/source/ipmi/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' && chmod 755 '/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' I have everything ok, readings working, connected via IPMI...... I run out of ideas. Any feedback will be welcome. Quote Link to comment
SimonF Posted June 17, 2023 Author Share Posted June 17, 2023 19 minutes ago, fleondelarosa said: Fan control is stopped, i don´t get it on, i looked everywhere. I used always this command with every server restart, is it still needed, right? curl -o '/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' -L 'https://raw.githubusercontent.com/lucasteligioridis/IPMI-unRAID/master/source/ipmi/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' && chmod 755 '/usr/local/emhttp/plugins/ipmi/scripts/ipmifan' I have everything ok, readings working, connected via IPMI...... I run out of ideas. Any feedback will be welcome. I suspect the replacement file is not compatible with php 8. Does the stock fan control not do what you need? Quote Link to comment
Froberg Posted June 17, 2023 Share Posted June 17, 2023 Read the release notes for 6.12. Uninstalled old plugin. Updated OS. Installed this. All settings and options blank pages. Tried uninstalling and re-installing a few times. Where to begin? Even my config you've asked for above seems much shorter. root@FortyTwo:~# cat /boot/config/plugins/ipmi/fan.cfg FANCONTROL="enable" FANPOLL="24" FANIP="" HDDPOLL="24" HDDIGNORE="" HARDDRIVES="enable" FAN_FAN1234="607" TEMP_FAN1234="4" TEMPHI_FAN1234="65" TEMPLO_FAN1234="50" FANMAX_FAN1234="80" FANMIN_FAN1234="39" FAN_FANA="875" TEMP_FANA="138" TEMPHI_FANA="65" TEMPLO_FANA="50" FANMAX_FANA="80" FANMIN_FANA="39" root@FortyTwo:~# Any advice? Quote Link to comment
Fisherman Posted June 17, 2023 Share Posted June 17, 2023 14 minutes ago, Froberg said: Read the release notes for 6.12. Uninstalled old plugin. Updated OS. Installed this. All settings and options blank pages. Tried uninstalling and re-installing a few times. Where to begin? Even my config you've asked for above seems much shorter. root@FortyTwo:~# cat /boot/config/plugins/ipmi/fan.cfg FANCONTROL="enable" FANPOLL="24" FANIP="" HDDPOLL="24" HDDIGNORE="" HARDDRIVES="enable" FAN_FAN1234="607" TEMP_FAN1234="4" TEMPHI_FAN1234="65" TEMPLO_FAN1234="50" FANMAX_FAN1234="80" FANMIN_FAN1234="39" FAN_FANA="875" TEMP_FANA="138" TEMPHI_FANA="65" TEMPLO_FANA="50" FANMAX_FANA="80" FANMIN_FANA="39" root@FortyTwo:~# Any advice? we posted two different config files, maybe that's why your post looks shorter For me, removing the line "PASSWORD=..." in /boot/config/plugins/ipmi/ipmi.cfg did the trick. 1 Quote Link to comment
Froberg Posted June 18, 2023 Share Posted June 18, 2023 4 hours ago, Fisherman said: we posted two different config files, maybe that's why your post looks shorter For me, removing the line "PASSWORD=..." in /boot/config/plugins/ipmi/ipmi.cfg did the trick. Yep, that did it. Cheers! 1 Quote Link to comment
fleondelarosa Posted June 18, 2023 Share Posted June 18, 2023 On 6/17/2023 at 6:14 PM, SimonF said: I suspect the replacement file is not compatible with php 8. Does the stock fan control not do what you need? The Fan control is not working at all. Which ipmifan file should I use? i have the X11SSL-CF mb. The Fans are always at full speed. I tried many restarts but not working, it is strange. As I said, before, it was working without problems. Everything is wrong after the update to Unraid 6.12. I would like to help here, I think that we have an issue @SimonF, just let me know what i should check. The logs from your application doesn´t say anything, just this: 2023-06-18 15:47:31 Starting Fan Control 2023-06-18 15:47:31 Setting fans to full speed 2023-06-18 15:47:41 Fan:Temp, FAN1234(16%):CPU Temp(44°C), FANA( 8%):HDD Temp(0°C) 2023-06-18 15:49:01 Fan:Temp, FAN1234(16%):CPU Temp(35°C), FANA(27%):HDD Temp(41°C) 2023-06-18 15:49:18 Stopping Fan Control 2023-06-18 15:49:18 Setting fans to auto Said that fans to auto but I got this in the GUI: Fan Control: Stopped. Fun are running at full speed all the time. HD and CPU are in green, not hot temperature (of course, the fans are running at full speed). In any case, it is now very hot here in Munich, Mein Gott!! Looking forward for any feedback @SimonF Regards Felipe Quote Link to comment
fleondelarosa Posted June 18, 2023 Share Posted June 18, 2023 Ok, one more thing. Using the IPMI web site of my motherboard, I put the fans at standard speed (quiet), but now they are speeding up and down, looks like if Unraid are forcing them to go at full speed (your software or my wrong ipmifan file) but IPMI web site said, no, you have to be standard speed at quiet level. I hope this information can help, @SimonF From the hot Munich city..... Quote Link to comment
SimonF Posted June 19, 2023 Author Share Posted June 19, 2023 7 hours ago, fleondelarosa said: Ok, one more thing. Using the IPMI web site of my motherboard, I put the fans at standard speed (quiet), but now they are speeding up and down, looks like if Unraid are forcing them to go at full speed (your software or my wrong ipmifan file) but IPMI web site said, no, you have to be standard speed at quiet level. I hope this information can help, @SimonF From the hot Munich city..... I did not write the original plugin, Changes I have made where to make 6.12 compatible. Why do you need to down load a new version of ipmifan on the previous version? If the fans are pulsing it sounds like the fan speed is going to low and the system thinks it fails and spins up all fans. So you may need to check the thresholds What are the values of your fans? Quote Link to comment
Froberg Posted June 22, 2023 Share Posted June 22, 2023 On 6/19/2023 at 8:35 AM, SimonF said: I did not write the original plugin, Changes I have made where to make 6.12 compatible. Why do you need to down load a new version of ipmifan on the previous version? If the fans are pulsing it sounds like the fan speed is going to low and the system thinks it fails and spins up all fans. So you may need to check the thresholds What are the values of your fans? This sounds like my original issue, where the Noctua fans I had populated my case with were operating at too low RPM's, so the IPMI on the motherboard panicked and made them run full-bore - so the noise floor when up, down, up, down, up down.. irritating to say the least. I raised the minimum fan speed to a fairly high level, but considering it's Noctua fans they're still silent. That made the IPMI shut up. Maybe check if you have events in IPMI concerning fan errors that's how I clued in on mine. Quote Link to comment
autumnwalker Posted June 22, 2023 Share Posted June 22, 2023 hmm - trying to do the "update" method outlined in the early posts, but it just keeps re-installing the old version by dmacias72. Do I have to be on 6.12 first? Quote Link to comment
Fisherman Posted June 22, 2023 Share Posted June 22, 2023 (edited) On 6/19/2023 at 12:11 AM, fleondelarosa said: Ok, one more thing. Using the IPMI web site of my motherboard, I put the fans at standard speed (quiet), but now they are speeding up and down, looks like if Unraid are forcing them to go at full speed (your software or my wrong ipmifan file) but IPMI web site said, no, you have to be standard speed at quiet level. I hope this information can help, @SimonF From the hot Munich city..... as Froberg wrote, the Noctua fans' minimum speeds need to respected. Perhaps they got messed up in your configuration - as a result, they go to full speed. The fan speeds going up/down sounds like a wrong setting in your mainboard's fan mode settings - to be able to control them using Unraid's IPMI plugin, they need to be set to "Full Speed". Edited June 22, 2023 by Fisherman typo Quote Link to comment
SimonF Posted June 22, 2023 Author Share Posted June 22, 2023 5 hours ago, autumnwalker said: hmm - trying to do the "update" method outlined in the early posts, but it just keeps re-installing the old version by dmacias72. Do I have to be on 6.12 first? You should be able to find my vers before 6.12 Quote Link to comment
autumnwalker Posted June 22, 2023 Share Posted June 22, 2023 (edited) 1 hour ago, SimonF said: You should be able to find my vers before 6.12 I can find it, but when I hit "update" it installs the dmacias72 version again. Edited June 22, 2023 by autumnwalker Quote Link to comment
SimonF Posted June 22, 2023 Author Share Posted June 22, 2023 1 hour ago, autumnwalker said: I can find it, but when I hit "update" it installs the dmacias72 version again. You may have to uninstall then install config should be retained. Quote Link to comment
autumnwalker Posted June 23, 2023 Share Posted June 23, 2023 15 hours ago, SimonF said: You may have to uninstall then install config should be retained. Thanks, I'll give this a shot. Quote Link to comment
autumnwalker Posted June 23, 2023 Share Posted June 23, 2023 Appears to have worked. Did the configuration for "enable localhost connection" get removed? I don't see it in settings anymore - but I see sensor values from IMPI so it must be working. Quote Link to comment
SimonF Posted June 23, 2023 Author Share Posted June 23, 2023 9 minutes ago, autumnwalker said: Appears to have worked. Did the configuration for "enable localhost connection" get removed? I don't see it in settings anymore - but I see sensor values from IMPI so it must be working. Yes local host still exists. Quote Link to comment
autumnwalker Posted June 23, 2023 Share Posted June 23, 2023 39 minutes ago, SimonF said: Yes local host still exists. Weird ... I don't see it here. Quote Link to comment
SimonF Posted June 23, 2023 Author Share Posted June 23, 2023 35 minutes ago, autumnwalker said: Weird ... I don't see it here. What do you get if you enable Network? Quote Link to comment
autumnwalker Posted June 23, 2023 Share Posted June 23, 2023 Ahh - that shows the localhost stuff - the old version I had network as "no". Quote Link to comment
fleondelarosa Posted June 28, 2023 Share Posted June 28, 2023 @SimonF, sorry, i was offline some days. What do you mean with the old ipmfan old version? that it is the one I had from the beginning and it was working before the update to 6.12. Where can i find the new version. I did some Gooogle without luck. And yes, the speed fun issue had it in the past and i solved it, but came back after the update. In any case, whay the GUI says Fan control stopped when I enable it? Regards Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.