I am having an issue working with Nordvpn on my unraid server. I followed a couple tutorials but mine doesn't seem to work. I get the error that it is unable to establish a connection. I have left it running for a while and this is my log. https://pastebin.com/xvPGGTYJ

When I set my sabnzb to send its traffic through delugevpn it appears to work based on the Ip output of curl ifconfig.io. However, when I add the 8080 port to delugevpn so I can access the sabnzb web interface, the sabnzb docker goes in to a continuous loop of rebuilding and never appears to complete the startup process. Has anyone run in to this before or have any suggestions?

22 hours ago, flashbash said:

I am having an issue working with Nordvpn on my unraid server. I followed a couple tutorials but mine doesn't seem to work. I get the error that it is unable to establish a connection. I have left it running for a while and this is my log. https://pastebin.com/xvPGGTYJ

After leaving it overnight the log has changed https://pastebin.com/j0ruazZz

Hi Binhex, 

I use both your sabnzbdvpn and delugevpn suddenly i couldn't connect to the WebUi for both, i though it might be a vpn issue, because when i disabled the vpn through the docker container, it would go to the webui's. 

Tried a different openvpn config file, removed my port forward, changed docker container versions.
I just can't see, what is causing this issue, happen a couple weeks ago..
so i have followed: documentation/docker/faq/help.md at master · binhex/documentation · GitHub

 

I hope you can help me with an answer for this annoying issue i have,, 
I have airvpn..

 

 

Edited January 10, 20242 yr by UserName7

43 minutes ago, UserName7 said:

Hi Binhex, 

I use both your sabnzbdvpn and delugevpn suddenly i couldn't connect to the WebUi for both, i though it might be a vpn issue, because when i disabled the vpn through the docker container, it would go to the webui's. 

Tried a different openvpn config file, removed my port forward, changed docker container versions.
I just can't see, what is causing this issue, happen a couple weeks ago..
so i have followed: documentation/docker/faq/help.md at master · binhex/documentation · GitHub

 

I hope you can help me with an answer for this annoying issue i have,, 
I have airvpn..

 

supervisord.log 969.79 kB · 0 downloads

from your attached log:-
AUTH_FAILED

 

see Q16:-  https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

5 minutes ago, binhex said:

from your attached log:-
AUTH_FAILED

 

see Q16:-  https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md

Yes i see, but there are not username og password for airvpn, am i right?? i have not used that before.. 
I think i must contact airvpn, because i just cant see why it suddenly stop working... 

1 minute ago, UserName7 said:

not username og password for airvpn, am i right??

there is still authentication, it is baked into your ovpn file, so goto airvpn and re-create the ovpn file and overwrite the existing file, that should do it.

1 minute ago, binhex said:

there is still authentication, it is baked into your ovpn file, so goto airvpn and re-create the ovpn file and overwrite the existing file, that should do it.

I just tried this, same thing happens.. 

Just now, UserName7 said:

I just tried this, same thing happens.. 

ok in that case you need to contact airvpn, tell them you are seeing auth_failed when attempting to connect using openvpn client.

On 1/8/2024 at 11:24 AM, binhex said:

ok in that case you need to contact airvpn, tell them you are seeing auth_failed when attempting to connect using openvpn client.

So i contacted airvpn, and they could see a connection directly to my delugevpn working fine, and i double checked, it is actually working, i just cannot get into webui unless i disable the vpn in the docker container.. 
I am just curious do you have any idea on what i could do now? also can you see anything in the logs now?? 
I am made fresh logs from today, i cant see the auth_failed anymore?? 
What is going on..... so weird  

Logs have been running for 5 minutes, but not updated since the webgui started it says, i just can't open it........
 

 

Edited January 10, 20242 yr by UserName7

54 minutes ago, UserName7 said:

So i contacted airvpn, and they could see a connection directly to my delugevpn working fine, and i double checked, it is actually working, i just cannot get into webui unless i disable the vpn in the docker container.. 
I am just curious do you have any idea on what i could do now? also can you see anything in the logs now?? 
I am made fresh logs from today, i cant see the auth_failed anymore?? 
What is going on..... so weird  

Logs have been running for 5 minutes, but not updated since the webgui started it says, i just can't open it........
 

supervisord.log 53.95 kB · 0 downloads

what is the ip of the machine running the web browser that is attempting connection to the web ui? is it in the range of 192.168.162.0 - 192.168.162.7 ?

4 minutes ago, binhex said:

what is the ip of the machine running the web browser that is attempting connection to the web ui? is it in the range of 192.168.162.0 - 192.168.162.7 ?

the server is running on 192.168.162.2/29 
all by itself, nothing else is on that scope. 
everything else i run on different vlans
Server runs multiple docker containers, hope that gave some answers?

1 minute ago, UserName7 said:

the server is running on 192.168.162.2/29 
all by itself, nothing else is on that scope. 
everything else i run on different vlans
Server runs multiple docker containers, hope that gave some answers?

im not after the ip of the server, i was asking about the ip of the machine you are using to attempt connection to the web ui, what is it?, if its not in the range i stated above then that is your issue (highly suspect this is the case). 

to fix it simply add in your additional vlan's that you want to access the web ui from using a comma to separate values, for example:-

 

LAN_NETWORK = 192.168.162.0/29,192.168.164.0/24,192.168.166.0/24

 

obviously the above is an example i dont know how you have defined your vlans but hopefully you get the idea.

3 minutes ago, binhex said:

im not after the ip of the server, i was asking about the ip of the machine you are using to attempt connection to the web ui, what is it?, if its not in the range i stated above then that is your issue (highly suspect this is the case). 

to fix it simply add in your additional vlan's that you want to access the web ui from using a comma to separate values, for example:-

 

LAN_NETWORK = 192.168.162.0/29,192.168.164.0/24,192.168.166.0/24

 

obviously the above is an example i dont know how you have defined your vlans but hopefully you get the idea.

Yes, i actually read about that in your documentation, and i already did add that vlan, that did not help me unfortunaly not.

Just now, UserName7 said:

Yes, i actually read about that in your documentation, and i already did add that vlan, that did not help me unfortunaly not.

so what is the value of LAN_NETWORK now and what is the ip of the machine running the web browser?.

1 minute ago, UserName7 said:

Yes, i actually read about that in your documentation, and i already did add that vlan, that did not help me unfortunaly not.

apparently it works now, THANK YOU so much for all the help binhex, i will use your app forward on with all this quick responds and help you give, awesome!

5 minutes ago, binhex said:

so what is the value of LAN_NETWORK now and what is the ip of the machine running the web browser?.

The problem i have now, is that when i add the ip scope, when it is succusfully changed in the docker container, it removes it from the list after i click done. 
When i edit the docker, it is gone, why?? 

1 minute ago, UserName7 said:

The problem i have now, is that when i add the ip scope, when it is succusfully changed in the docker container, it removes it from the list after i click done. 
When i edit the docker, it is gone, why?? 

sorry i dont know what you mean, can you post some screenshots?

2 minutes ago, binhex said:

sorry i dont know what you mean, can you post some screenshots?

 

Just now, UserName7 said:

 

so you left clicked the deluge icon in unraid docker web ui and selected edit and then edited the Key 9 (LAN_NETWORK) right?, if not thats what you have to do, then click 'apply' at the bottom.

1 minute ago, binhex said:

so you left clicked the deluge icon in unraid docker web ui and selected edit and then edited the Key 9 (LAN_NETWORK) right?, if not thats what you have to do, then click 'apply' at the bottom.

that is what i do, and when i press apply, it changes back to only that 1 ip address and does not show the one i added?

19 minutes ago, UserName7 said:

that is what i do, and when i press apply, it changes back to only that 1 ip address and does not show the one i added?

that is not normal, are you sue your usb key is ok?, keep in mind docker template config is stored on the usb key, so if the key is corrupt then you may start seeing weird issues such as this.

 

try temporarily saving another change for another container, does this stick or does this also revert back?.

23 minutes ago, binhex said:

that is not normal, are you sue your usb key is ok?, keep in mind docker template config is stored on the usb key, so if the key is corrupt then you may start seeing weird issues such as this.

 

try temporarily saving another change for another container, does this stick or does this also revert back?.

funny thing, my usb is saying it failed read/write, already ordered new usb.. it is buggy, maybe it was that thing that caused all my other small issues i have... 

Another thing, i think i saw your post somewhere, but i want to remove the standard deluge password, any quick way to do that? 
or is it coming in an update soon?

19 minutes ago, UserName7 said:

funny thing, my usb is saying it failed read/write

ha there a go!, def the cause.

Hello, I'm new to unRaid! I'm having an issue where I cannot access the web gui for deluge (I also tried to try and install qbittorrentvpn instead and its the same issue). It was working fine up until recently when I had to move everything off the cache disks to reformat them because of a different issue. I moved everything back and all the dockers seem to be working fine. I can get into sonarr, radarr, plex, etc. Deluge is still seeding and connecting to the vpn but when I try to open the web gui I just get "The connection has timed out. The server is taking too long to respond." page. I've already uninstalled, deleted the appdata folder, reinstalled, and gotten a new ovpn file.