Jump to content
binhex

[Support] binhex - DelugeVPN

3966 posts in this topic Last Reply

Recommended Posts

Hum that's unfortunate.  :(

 

I guess I'll stick to the older version of the docker image. At least until my vpn subscription is over. Then I'll probably move on.

 

Thanks for your help anyway! I really appreciate.  :)

Share this post


Link to post

Is there a way to view the tracker status? I've always used uTorrent before moving to this docker container and it was easy to just scan through the list to see what torrents may have been deleted from the torrent server (so that I can stop seeding them).

 

The only way I've found in Deluge is to click each individual torrent and see if tracker status says "announce OK" or "failure unregistered torrent"

 

I like to seed my torrents for a long time, but usually the servers take down the torrent if a new version is uploaded.

Share this post


Link to post

I recently switched from the transmissionvpn docker to this delugevpn in hopes of getting a running torrent container. Sadly I have had no luck with either. I just do not understand why every container is broken now. I'd happily download an older build if I could figure that out.

 

Either way, I've attached a log. If someone can find something in there and help out I'd be grateful. Thanks.

supervisord.txt

Share this post


Link to post

I recently switched from the transmissionvpn docker to this delugevpn in hopes of getting a running torrent container. Sadly I have had no luck with either. I just do not understand why every container is broken now. I'd happily download an older build if I could figure that out.

 

Either way, I've attached a log. If someone can find something in there and help out I'd be grateful. Thanks.

OK firstly your in the wrong thread, this is for delugevpn not rtorrentvpn, so any replies in there please. So taking a look at your logs that is a successful start, there is nothing wrong there, are you attempting to connect to the webui from inside your lan yes? You would need to connect using http://<your unraid servers IP>:<host port mapped to 9080> I can assure you the VPN dockers I have authored are not "broken".

 

Sent from my SM-G900F using Tapatalk

 

Share this post


Link to post

I recently switched from the transmissionvpn docker to this delugevpn in hopes of getting a running torrent container. Sadly I have had no luck with either. I just do not understand why every container is broken now. I'd happily download an older build if I could figure that out.

 

Either way, I've attached a log. If someone can find something in there and help out I'd be grateful. Thanks.

OK firstly your in the wrong thread, this is for delugevpn not rtorrentvpn, so any replies in there please. So taking a look at your logs that is a successful start, there is nothing wrong there, are you attempting to connect to the webui from inside your lan yes? You would need to connect using http://<your unraid servers IP>:<host port mapped to 9080> I can assure you the VPN dockers I have authored are not "broken".

 

Sent from my SM-G900F using Tapatalk

 

Well I'm using the delugevpn so I figured I'd post in the delugevpn support thread. My mistake.

 

Anyway neither 9080 or 8112 work for the webui. 8112 being the port used in the webui shortcut.

 

edit: Starting it without the VPN enabled works. I can access the ui perfectly.

edit2: Got it working.

Share this post


Link to post

I used to have DelugeVPN working perfectly with my IPVanish vpn provider.  They recently changed something so I went and updated the certificate for my vpn provider and now my Deluge won't connect to any peers.  I can post the docker log or any other information to hep resolve the issue.

 

Thanks.

Share this post


Link to post

I recently switched from the transmissionvpn docker to this delugevpn in hopes of getting a running torrent container. Sadly I have had no luck with either. I just do not understand why every container is broken now. I'd happily download an older build if I could figure that out.

 

Either way, I've attached a log. If someone can find something in there and help out I'd be grateful. Thanks.

OK firstly your in the wrong thread, this is for delugevpn not rtorrentvpn, so any replies in there please. So taking a look at your logs that is a successful start, there is nothing wrong there, are you attempting to connect to the webui from inside your lan yes? You would need to connect using http://<your unraid servers IP>:<host port mapped to 9080> I can assure you the VPN dockers I have authored are not "broken".

 

Sent from my SM-G900F using Tapatalk

 

Well I'm using the delugevpn so I figured I'd post in the delugevpn support thread. My mistake.

 

Anyway neither 9080 or 8112 work for the webui. 8112 being the port used in the webui shortcut.

 

edit: Starting it without the VPN enabled works. I can access the ui perfectly.

edit2: Got it working.

 

Did your solution have to do with enabling then disabling VM's ?

Share this post


Link to post

I recently switched from the transmissionvpn docker to this delugevpn in hopes of getting a running torrent container. Sadly I have had no luck with either. I just do not understand why every container is broken now. I'd happily download an older build if I could figure that out.

 

Either way, I've attached a log. If someone can find something in there and help out I'd be grateful. Thanks.

OK firstly your in the wrong thread, this is for delugevpn not rtorrentvpn, so any replies in there please. So taking a look at your logs that is a successful start, there is nothing wrong there, are you attempting to connect to the webui from inside your lan yes? You would need to connect using http://<your unraid servers IP>:<host port mapped to 9080> I can assure you the VPN dockers I have authored are not "broken".

 

Sent from my SM-G900F using Tapatalk

 

Well I'm using the delugevpn so I figured I'd post in the delugevpn support thread. My mistake.

 

Anyway neither 9080 or 8112 work for the webui. 8112 being the port used in the webui shortcut.

 

edit: Starting it without the VPN enabled works. I can access the ui perfectly.

edit2: Got it working.

 

hmm ok tapaatalk is screwing me over again with the wrong supervisord.log file, apologise for that that one linked to was again the wrong  log :-(. in any case i see you sorted it, i spotted your issue, you had VPN_REMOTE defined as the name of the ovpn file, not the remote value inside the ovpn file, im assuming this was the resolution right?, if not then please detail as it could be useful for somebody else using the same provider.

 

@mr-hexen, im not sure if your aware of this but i now have a much slicker way of getting the iptable mangle support working than start-stop of vm, see my VPN FAQ link below in my sig, it works a treat!.

Share this post


Link to post

@mr-hexen, im not sure if your aware of this but i now have a much slicker way of getting the iptable mangle support working than start-stop of vm, see my VPN FAQ link below in my sig, it works a treat!.

 

Didnt know you had that in the FAQ, FYI, the "code" is missing a quotation at the start of the second echo command.

Share this post


Link to post

Hi, I'm wondering if someone could help me. I installed delugevpn but when I try to access the Web UI deluge won't work and my brower says "This site can’t be reached". However, when I change the VPN setting to no, it then works fine.

 

These are some of the things I have done to try and fix it:

- I've checked my username and password, and I'm using pia, but it still won't work.

- The username is definitely the username I use to Log in PIA account

- I've changed the location for pia server to see if it might be that

- Tried reinstalling it a quite a few times.

- Changed my pia password so that it doesn't have characters such as !@£$%

 

I've uploaded my supervisord file to this if that is any help. (Omitting the username and password for obvious reasons.)

 

Thanks :)

supervisord.txt

Share this post


Link to post

Are you sure you've set the subnet access correctly?

 

what is the IP address of your unRAID server?

 

run this command from a command line prompt:

ifconfig 

 

Either 'br0' or 'eth0' will have your unRAID ip address.

Share this post


Link to post

Are you sure you've set the subnet access correctly?

 

what is the IP address of your unRAID server?

 

run this command from a command line prompt:

ifconfig 

 

Either 'br0' or 'eth0' will have your unRAID ip address.

 

The IP address is 192.168.0.2, and it says the same under eth0 when I run that command.

 

There is this warning in the log, I'm not sure if this is the issue, what it is or how to fix it:

 

[warn] iptable_mangle module not supported, you will not be able to connect to ruTorrent or Privoxy outside of your LAN

[info] Please attempt to load the module by executing the following on your host:- '/sbin/modprobe iptable_mangle'

Share this post


Link to post

Are you sure you've set the subnet access correctly?

 

what is the IP address of your unRAID server?

 

run this command from a command line prompt:

ifconfig 

 

Either 'br0' or 'eth0' will have your unRAID ip address.

 

The IP address is 192.168.0.2, and it says the same under eth0 when I run that command.

 

There is this warning in the log, I'm not sure if this is the issue, what it is or how to fix it:

 

[warn] iptable_mangle module not supported, you will not be able to connect to ruTorrent or Privoxy outside of your LAN

[info] Please attempt to load the module by executing the following on your host:- '/sbin/modprobe iptable_mangle'

 

You can try, but I've assumed these attempts to connect are from within the same network?

Share this post


Link to post

Are you sure you've set the subnet access correctly?

 

what is the IP address of your unRAID server?

 

run this command from a command line prompt:

ifconfig 

 

Either 'br0' or 'eth0' will have your unRAID ip address.

 

The IP address is 192.168.0.2, and it says the same under eth0 when I run that command.

 

There is this warning in the log, I'm not sure if this is the issue, what it is or how to fix it:

 

[warn] iptable_mangle module not supported, you will not be able to connect to ruTorrent or Privoxy outside of your LAN

[info] Please attempt to load the module by executing the following on your host:- '/sbin/modprobe iptable_mangle'

 

OK, so the LAN_NETWORK entry is your problem.

 

From your supervisor log

2017-02-04 23:30:00.921672 [info] LAN_NETWORK defined as '192.168.1.0/24'

 

This should be 192.168.0.0/24

Share this post


Link to post
OK, so the LAN_NETWORK entry is your problem.

 

From your supervisor log

2017-02-04 23:30:00.921672 [info] LAN_NETWORK defined as '192.168.1.0/24'

 

This should be 192.168.0.0/24

 

Thank you guys very much! That's fixed it. I owe you :)

Share this post


Link to post

If anyone is owed anything, it's binhex who made this awsome container.

 

Oh definitely, it's awesome, thank you binhex :). But thank you to you also for helping me fix this problem I had :)

Share this post


Link to post

Odd problem here, Deluge is running, OpenVPN is running.

 

The docker image is happily connected to the VPN provider and I can ping and curl etc... no problem and it shows the correct VPN IP address.

 

Deluge however cannot connect to any trackers, but can connect to peers no problem and is downloading torrents ok (sans trackers.)

 

Seeing as the docker container can connect online no problem via the VPN I have no idea what is wrong.

 

Ideas?

 

Edit: I suspect the provider is blocking trackers...

Share this post


Link to post

Odd problem here, Deluge is running, OpenVPN is running.

 

The docker image is happily connected to the VPN provider and I can ping and curl etc... no problem and it shows the correct VPN IP address.

 

Deluge however cannot connect to any trackers, but can connect to peers no problem and is downloading torrents ok (sans trackers.)

 

Seeing as the docker container can connect online no problem via the VPN I have no idea what is wrong.

 

Ideas?

 

Edit: I suspect the provider is blocking trackers...

 

if the trackers are private it is also possible that they block known ip blocks from vpn providers, ive heard of that happening before. If you want to go with a known working provider that doesn't block then PIA or airvpn are the recommended right now.

Share this post


Link to post

I apologize if this isn't the right place to ask, but does anyone have filebot AMC working with this?

If so would you mind telling me how you did it?

 

I'm looking to use my server for my downloading and reanaming... Currently I'm using a seperate pc running Utorrent with a really specific set up for Filebot AMC that I love (I am aware there are other renames on Unraid, but I'd prefer to stick with Filebot if possible). On Windows filebot amc is  integrated right into the torrent program that's why I'm posting here since I'd imagine it would be on Unraid too.

Share this post


Link to post

I'm having a similar problem to some other people I've read, but scanning through 20-30 pages of this thread I haven't been able to find a solution that works for me.

 

I can't access the WebUI from my LAN (haven't tested from outside the network yet). When I have VPN set to disabled, everything works fine. Once I enable it though I can't get in to the WebUI. I'm positive my user name and password is correct. I use NordVPN for my provider.

 

Note: I am VERY new to this, all I've done is configure unRAID, install and configure PLEX, install and configure OpenVPN (for remote access to the server), and now installed Deluge. I tried turning off the OpenVPN docker just to be sure something wasn't interfering, no change though.

 

I tried port 1198 default, and 1194 which I found in a NordVPN DD-WRT setup guide on their website. Not sure what else to do. I just followed a YouTube video from "Spaceinvader One" and it just all works first try in the video, so I'm not sure what I'm doing wrong. I haven't done anything else, just loaded the docker from the Community Applications, then did the basic configuration following the video, very simple stuff.

 

This is from the supervisord.log, but I'm not even sure if I'm pulling the right thing. Hopefully this is what is needed, I'd really appreciate some help, thanks!

 

Created by...
___.   .__       .__                   
\_ |__ |__| ____ |  |__   ____ ___  ___
| __ \|  |/    \|  |  \_/ __ \\  \/  /
| \_\ \  |   |  \   Y  \  ___/ >    < 
|___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/

2017-02-08 20:35:47.218690 [info] Host is running unRAID
2017-02-08 20:35:47.265224 [info] System information Linux e44db2804ff2 4.9.7-unRAID #1 SMP PREEMPT Thu Feb 2 12:39:28 PST 2017 x86_64 GNU/Linux
2017-02-08 20:35:47.329423 [info] PUID defined as '99'
2017-02-08 20:35:47.399671 [info] PGID defined as '100'
2017-02-08 20:35:47.497477 [info] Permissions already set for volume mappings
2017-02-08 20:35:47.563487 [info] VPN_ENABLED defined as 'yes'
2017-02-08 20:35:47.614226 [info] VPN_PROV defined as 'custom'
2017-02-08 20:35:47.683430 [info] VPN_REMOTE defined as 'us13.nordvpn.com'
2017-02-08 20:35:47.734997 [info] VPN_PORT defined as '1194'
2017-02-08 20:35:47.797310 [info] VPN_PROTOCOL defined as 'udp'
2017-02-08 20:35:47.862865 [info] LAN_NETWORK defined as '192.168.1.0/24'
2017-02-08 20:35:47.925264 [info] NAME_SERVERS defined as '8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177'
2017-02-08 20:35:47.991464 [info] VPN_USER defined as 'xxxxx'
2017-02-08 20:35:48.058654 [info] VPN_PASS defined as 'yyyyy'
2017-02-08 20:35:48.112868 [info] VPN_DEVICE_TYPE defined as 'tun'
2017-02-08 20:35:48.183210 [info] STRONG_CERTS defined as 'no'
2017-02-08 20:35:48.242644 [info] ENABLE_PRIVOXY defined as 'no'
2017-02-08 20:35:48.306195 [info] Setting permissions on files/folders inside container...
2017-02-08 20:35:48,854 CRIT Set uid to user 0
2017-02-08 20:35:48,854 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2017-02-08 20:35:48,860 INFO supervisord started with pid 7
2017-02-08 20:35:49,863 INFO spawned: 'checkproc-script' with pid 104
2017-02-08 20:35:49,867 INFO spawned: 'start-script' with pid 105
2017-02-08 20:35:49,870 INFO spawned: 'deluge-script' with pid 106
2017-02-08 20:35:49,872 INFO spawned: 'deluge-web-script' with pid 107
2017-02-08 20:35:49,875 INFO spawned: 'privoxy-script' with pid 108
2017-02-08 20:35:49,884 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2017-02-08 20:35:49,884 INFO success: checkproc-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,884 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,886 DEBG 'deluge-script' stdout output:
[info] Deluge config file already exists, skipping copy
[info] VPN is enabled, checking VPN tunnel local ip is valid

2017-02-08 20:35:49,889 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2017-02-08 20:35:49,890 DEBG fd 27 closed, stopped monitoring <POutputDispatcher at 47835709196408 for <Subprocess at 47835709959488 with name privoxy-script in state RUNNING> (stdout)>
2017-02-08 20:35:49,890 DEBG fd 31 closed, stopped monitoring <POutputDispatcher at 47835709196264 for <Subprocess at 47835709959488 with name privoxy-script in state RUNNING> (stderr)>
2017-02-08 20:35:49,890 INFO exited: privoxy-script (exit status 0; expected)
2017-02-08 20:35:49,891 DEBG received SIGCLD indicating a child quit
2017-02-08 20:35:49,898 DEBG 'start-script' stdout output:
[crit] Missing OpenVPN configuration file in /config/openvpn/ (no files with an ovpn extension exist) please create and restart delugevpn

2017-02-08 20:35:49,898 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 47835709959920 for <Subprocess at 47835709958408 with name start-script in state RUNNING> (stderr)>
2017-02-08 20:35:49,898 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 47835709959848 for <Subprocess at 47835709958408 with name start-script in state RUNNING> (stdout)>
2017-02-08 20:35:49,899 INFO exited: start-script (exit status 1; not expected)
2017-02-08 20:35:49,899 DEBG received SIGCLD indicating a child quit

Share this post


Link to post

I apologize if this isn't the right place to ask, but does anyone have filebot AMC working with this?

If so would you mind telling me how you did it?

 

I'm looking to use my server for my downloading and reanaming... Currently I'm using a seperate pc running Utorrent with a really specific set up for Filebot AMC that I love (I am aware there are other renames on Unraid, but I'd prefer to stick with Filebot if possible). On Windows filebot amc is  integrated right into the torrent program that's why I'm posting here since I'd imagine it would be on Unraid too.

I came from windows + utorrent with some customised scripts that worked very well to do my renaming and sorting.

Nearly just created a windows VM and recreated my setup.

 

However when I moved to unraid I swallowed a bitter pill and started from scratch using Couchpotato (for movies) + Sickrage (for TV) + Jackett + DelugeVPN.

Was worth it in the end, particularly for easily searching + adding new content.

 

Share this post


Link to post

I'm having a similar problem to some other people I've read, but scanning through 20-30 pages of this thread I haven't been able to find a solution that works for me.

 

I can't access the WebUI from my LAN (haven't tested from outside the network yet). When I have VPN set to disabled, everything works fine. Once I enable it though I can't get in to the WebUI. I'm positive my user name and password is correct. I use NordVPN for my provider.

 

Note: I am VERY new to this, all I've done is configure unRAID, install and configure PLEX, install and configure OpenVPN (for remote access to the server), and now installed Deluge. I tried turning off the OpenVPN docker just to be sure something wasn't interfering, no change though.

 

I tried port 1198 default, and 1194 which I found in a NordVPN DD-WRT setup guide on their website. Not sure what else to do. I just followed a YouTube video from "Spaceinvader One" and it just all works first try in the video, so I'm not sure what I'm doing wrong. I haven't done anything else, just loaded the docker from the Community Applications, then did the basic configuration following the video, very simple stuff.

 

This is from the supervisord.log, but I'm not even sure if I'm pulling the right thing. Hopefully this is what is needed, I'd really appreciate some help, thanks!

 

Created by...
___.   .__       .__                   
\_ |__ |__| ____ |  |__   ____ ___  ___
| __ \|  |/    \|  |  \_/ __ \\  \/  /
| \_\ \  |   |  \   Y  \  ___/ >    < 
|___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/

2017-02-08 20:35:47.218690 [info] Host is running unRAID
2017-02-08 20:35:47.265224 [info] System information Linux e44db2804ff2 4.9.7-unRAID #1 SMP PREEMPT Thu Feb 2 12:39:28 PST 2017 x86_64 GNU/Linux
2017-02-08 20:35:47.329423 [info] PUID defined as '99'
2017-02-08 20:35:47.399671 [info] PGID defined as '100'
2017-02-08 20:35:47.497477 [info] Permissions already set for volume mappings
2017-02-08 20:35:47.563487 [info] VPN_ENABLED defined as 'yes'
2017-02-08 20:35:47.614226 [info] VPN_PROV defined as 'custom'
2017-02-08 20:35:47.683430 [info] VPN_REMOTE defined as 'us13.nordvpn.com'
2017-02-08 20:35:47.734997 [info] VPN_PORT defined as '1194'
2017-02-08 20:35:47.797310 [info] VPN_PROTOCOL defined as 'udp'
2017-02-08 20:35:47.862865 [info] LAN_NETWORK defined as '192.168.1.0/24'
2017-02-08 20:35:47.925264 [info] NAME_SERVERS defined as '8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177'
2017-02-08 20:35:47.991464 [info] VPN_USER defined as 'xxxxx'
2017-02-08 20:35:48.058654 [info] VPN_PASS defined as 'yyyyy'
2017-02-08 20:35:48.112868 [info] VPN_DEVICE_TYPE defined as 'tun'
2017-02-08 20:35:48.183210 [info] STRONG_CERTS defined as 'no'
2017-02-08 20:35:48.242644 [info] ENABLE_PRIVOXY defined as 'no'
2017-02-08 20:35:48.306195 [info] Setting permissions on files/folders inside container...
2017-02-08 20:35:48,854 CRIT Set uid to user 0
2017-02-08 20:35:48,854 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2017-02-08 20:35:48,860 INFO supervisord started with pid 7
2017-02-08 20:35:49,863 INFO spawned: 'checkproc-script' with pid 104
2017-02-08 20:35:49,867 INFO spawned: 'start-script' with pid 105
2017-02-08 20:35:49,870 INFO spawned: 'deluge-script' with pid 106
2017-02-08 20:35:49,872 INFO spawned: 'deluge-web-script' with pid 107
2017-02-08 20:35:49,875 INFO spawned: 'privoxy-script' with pid 108
2017-02-08 20:35:49,884 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2017-02-08 20:35:49,884 INFO success: checkproc-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,884 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,886 DEBG 'deluge-script' stdout output:
[info] Deluge config file already exists, skipping copy
[info] VPN is enabled, checking VPN tunnel local ip is valid

2017-02-08 20:35:49,889 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2017-02-08 20:35:49,890 DEBG fd 27 closed, stopped monitoring <POutputDispatcher at 47835709196408 for <Subprocess at 47835709959488 with name privoxy-script in state RUNNING> (stdout)>
2017-02-08 20:35:49,890 DEBG fd 31 closed, stopped monitoring <POutputDispatcher at 47835709196264 for <Subprocess at 47835709959488 with name privoxy-script in state RUNNING> (stderr)>
2017-02-08 20:35:49,890 INFO exited: privoxy-script (exit status 0; expected)
2017-02-08 20:35:49,891 DEBG received SIGCLD indicating a child quit
2017-02-08 20:35:49,898 DEBG 'start-script' stdout output:
[crit] Missing OpenVPN configuration file in /config/openvpn/ (no files with an ovpn extension exist) please create and restart delugevpn

2017-02-08 20:35:49,898 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 47835709959920 for <Subprocess at 47835709958408 with name start-script in state RUNNING> (stderr)>
2017-02-08 20:35:49,898 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 47835709959848 for <Subprocess at 47835709958408 with name start-script in state RUNNING> (stdout)>
2017-02-08 20:35:49,899 INFO exited: start-script (exit status 1; not expected)
2017-02-08 20:35:49,899 DEBG received SIGCLD indicating a child quit

Read the log, pay attention to the line starting with [crit]

 

Sent from my SM-G900F using Tapatalk

 

 

Share this post


Link to post

I'm having a similar problem to some other people I've read, but scanning through 20-30 pages of this thread I haven't been able to find a solution that works for me.

 

I can't access the WebUI from my LAN (haven't tested from outside the network yet). When I have VPN set to disabled, everything works fine. Once I enable it though I can't get in to the WebUI. I'm positive my user name and password is correct. I use NordVPN for my provider.

 

Note: I am VERY new to this, all I've done is configure unRAID, install and configure PLEX, install and configure OpenVPN (for remote access to the server), and now installed Deluge. I tried turning off the OpenVPN docker just to be sure something wasn't interfering, no change though.

 

I tried port 1198 default, and 1194 which I found in a NordVPN DD-WRT setup guide on their website. Not sure what else to do. I just followed a YouTube video from "Spaceinvader One" and it just all works first try in the video, so I'm not sure what I'm doing wrong. I haven't done anything else, just loaded the docker from the Community Applications, then did the basic configuration following the video, very simple stuff.

 

This is from the supervisord.log, but I'm not even sure if I'm pulling the right thing. Hopefully this is what is needed, I'd really appreciate some help, thanks!

 

Created by...
___.   .__       .__                   
\_ |__ |__| ____ |  |__   ____ ___  ___
| __ \|  |/    \|  |  \_/ __ \\  \/  /
| \_\ \  |   |  \   Y  \  ___/ >    < 
|___  /__|___|  /___|  /\___  >__/\_ \
     \/        \/     \/     \/      \/
   https://hub.docker.com/u/binhex/

2017-02-08 20:35:47.218690 [info] Host is running unRAID
2017-02-08 20:35:47.265224 [info] System information Linux e44db2804ff2 4.9.7-unRAID #1 SMP PREEMPT Thu Feb 2 12:39:28 PST 2017 x86_64 GNU/Linux
2017-02-08 20:35:47.329423 [info] PUID defined as '99'
2017-02-08 20:35:47.399671 [info] PGID defined as '100'
2017-02-08 20:35:47.497477 [info] Permissions already set for volume mappings
2017-02-08 20:35:47.563487 [info] VPN_ENABLED defined as 'yes'
2017-02-08 20:35:47.614226 [info] VPN_PROV defined as 'custom'
2017-02-08 20:35:47.683430 [info] VPN_REMOTE defined as 'us13.nordvpn.com'
2017-02-08 20:35:47.734997 [info] VPN_PORT defined as '1194'
2017-02-08 20:35:47.797310 [info] VPN_PROTOCOL defined as 'udp'
2017-02-08 20:35:47.862865 [info] LAN_NETWORK defined as '192.168.1.0/24'
2017-02-08 20:35:47.925264 [info] NAME_SERVERS defined as '8.8.8.8,37.235.1.174,8.8.4.4,37.235.1.177'
2017-02-08 20:35:47.991464 [info] VPN_USER defined as 'xxxxx'
2017-02-08 20:35:48.058654 [info] VPN_PASS defined as 'yyyyy'
2017-02-08 20:35:48.112868 [info] VPN_DEVICE_TYPE defined as 'tun'
2017-02-08 20:35:48.183210 [info] STRONG_CERTS defined as 'no'
2017-02-08 20:35:48.242644 [info] ENABLE_PRIVOXY defined as 'no'
2017-02-08 20:35:48.306195 [info] Setting permissions on files/folders inside container...
2017-02-08 20:35:48,854 CRIT Set uid to user 0
2017-02-08 20:35:48,854 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2017-02-08 20:35:48,860 INFO supervisord started with pid 7
2017-02-08 20:35:49,863 INFO spawned: 'checkproc-script' with pid 104
2017-02-08 20:35:49,867 INFO spawned: 'start-script' with pid 105
2017-02-08 20:35:49,870 INFO spawned: 'deluge-script' with pid 106
2017-02-08 20:35:49,872 INFO spawned: 'deluge-web-script' with pid 107
2017-02-08 20:35:49,875 INFO spawned: 'privoxy-script' with pid 108
2017-02-08 20:35:49,884 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2017-02-08 20:35:49,884 INFO success: checkproc-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,884 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: deluge-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: deluge-web-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,885 INFO success: privoxy-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2017-02-08 20:35:49,886 DEBG 'deluge-script' stdout output:
[info] Deluge config file already exists, skipping copy
[info] VPN is enabled, checking VPN tunnel local ip is valid

2017-02-08 20:35:49,889 DEBG 'privoxy-script' stdout output:
[info] Privoxy set to disabled

2017-02-08 20:35:49,890 DEBG fd 27 closed, stopped monitoring <POutputDispatcher at 47835709196408 for <Subprocess at 47835709959488 with name privoxy-script in state RUNNING> (stdout)>
2017-02-08 20:35:49,890 DEBG fd 31 closed, stopped monitoring <POutputDispatcher at 47835709196264 for <Subprocess at 47835709959488 with name privoxy-script in state RUNNING> (stderr)>
2017-02-08 20:35:49,890 INFO exited: privoxy-script (exit status 0; expected)
2017-02-08 20:35:49,891 DEBG received SIGCLD indicating a child quit
2017-02-08 20:35:49,898 DEBG 'start-script' stdout output:
[crit] Missing OpenVPN configuration file in /config/openvpn/ (no files with an ovpn extension exist) please create and restart delugevpn

2017-02-08 20:35:49,898 DEBG fd 16 closed, stopped monitoring <POutputDispatcher at 47835709959920 for <Subprocess at 47835709958408 with name start-script in state RUNNING> (stderr)>
2017-02-08 20:35:49,898 DEBG fd 11 closed, stopped monitoring <POutputDispatcher at 47835709959848 for <Subprocess at 47835709958408 with name start-script in state RUNNING> (stdout)>
2017-02-08 20:35:49,899 INFO exited: start-script (exit status 1; not expected)
2017-02-08 20:35:49,899 DEBG received SIGCLD indicating a child quit

Read the log, pay attention to the line starting with [crit]

 

Sent from my SM-G900F using Tapatalk

 

 

[crit] Missing OpenVPN configuration file in /config/openvpn/ (no files with an ovpn extension exist) please create and restart delugevpn

Share this post


Link to post

Thank you for the responses, not sure how I missed that. Guess I was looking everywhere else except at the obvious error message. I found the file from NordVPN and then changed my port to 1194 and everything is working now. Thanks!

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now