jbrodriguez Posted November 26, 2021 Author Share Posted November 26, 2021 28 minutes ago, zenmak said: Hi. I'm currently on unraid version 6.10.0-rc2 and just loaded the 3.0v of the plugin.. the issue is that when I click the link, the page doesn't load. I have tried to uninstall/reinstall the plugin as well as enable/disable. This site can’t be reached towerone.local refused to connect. Try: Checking the connection Checking the proxy and the firewall ERR_CONNECTION_REFUSED Oh, that might be a bug, I'll check Quote Link to comment
jbrodriguez Posted November 26, 2021 Author Share Posted November 26, 2021 It's working for me on a 6.10.0-rc2 server The plugin runs on port 2378, maybe you're blocking that port somewhere in your network ? Quote Link to comment
StanC Posted November 26, 2021 Share Posted November 26, 2021 Does this plugin work when a server is configured under Management Access to us ####.unraid.net? Currently I have two server configured as such and I am not able to configure or access them. When I click on the link on the plugin settings to bring up the QR Code it fails "cannot access this site". I look at the URL and it is using https with port 2379, if I change the url to http and port 2378 then the page comes up. If I remove the Management Access settings (unprovision the server from *.unraid.net) then the plugin works just fine. So maybe there is a something going on that is preventing this plugin from working on *.unraid.net. Quote Link to comment
jbrodriguez Posted November 26, 2021 Author Share Posted November 26, 2021 9 minutes ago, StanC said: Does this plugin work when a server is configured under Management Access to us ####.unraid.net? Currently I have two server configured as such and I am not able to configure or access them. When I click on the link on the plugin settings to bring up the QR Code it fails "cannot access this site". I look at the URL and it is using https with port 2379, if I change the url to http and port 2378 then the page comes up. If I remove the Management Access settings (unprovision the server from *.unraid.net) then the plugin works just fine. So maybe there is a something going on that is preventing this plugin from working on *.unraid.net. I think what's happening is that the plugin can't detect that you're provisioning/unprovisioning the server. At plugin startup, it checks if it's running on an http or https server. It seems in your case, it started with http, and after provisioning the server, it switched to https, but the plugin doesn't know about that. Can you restart the plugin after you're provisioned into x.unraid.net, see if it works ? Quote Link to comment
zenmak Posted November 26, 2021 Share Posted November 26, 2021 i got it to work.. the link is opening to port 2379, when in fact it should be 2378, but in addition, the link is using SSL and i get a SSL protocol failure: towerone.local sent an invalid response. ERR_SSL_PROTOCOL_ERROR it works if I change it back to: http://192.168.1.105:2378 Quote Link to comment
zenmak Posted November 26, 2021 Share Posted November 26, 2021 (edited) so i got the QR code to show up but in the app there is no where to scan it, android app btw edit: i ended up manually adding the server and then it worked.. it also turned out that since i use pihole, i needed to add towerone.local in my dns settings for that to resolve correctly, after i did that it worked fine. thanks for the help! Edited November 26, 2021 by zenmak Quote Link to comment
StanC Posted November 26, 2021 Share Posted November 26, 2021 1 hour ago, jbrodriguez said: I think what's happening is that the plugin can't detect that you're provisioning/unprovisioning the server. At plugin startup, it checks if it's running on an http or https server. It seems in your case, it started with http, and after provisioning the server, it switched to https, but the plugin doesn't know about that. Can you restart the plugin after you're provisioned into x.unraid.net, see if it works ? Same results. I have even uninstalled the plugin, rebooted the server, and reinstalled the plugin. So for now, I have completed removed the plugin from all of my servers, since it does not work. Also noting that the addition of the QR Code is nice, but in the IOS app I did not see an option to scan a QR Code. The only options are Discovery or Manual when adding a server. I have also remove the app from my iPhone and iPad. Quote Link to comment
jbrodriguez Posted November 26, 2021 Author Share Posted November 26, 2021 26 minutes ago, zenmak said: so i got the QR code to show up but in the app there is no where to scan it, android app btw edit: i ended up manually adding the server and then it worked.. it also turned out that since i use pihole, i needed to add towerone.local in my dns settings for that to resolve correctly, after i did that it worked fine. thanks for the help! glad to know it worked. i'll be releasing an app update that will be able to read the qrcode. it will be a bit experimental, since i haven't been able to test in a lot of different devices (especially on the android side) Quote Link to comment
jbrodriguez Posted November 26, 2021 Author Share Posted November 26, 2021 25 minutes ago, StanC said: Also noting that the addition of the QR Code is nice, but in the IOS app I did not see an option to scan a QR Code. i'll be releasing an app update that enables adding servers using the qrcode, this should happen over the weekend if everything goes according to plan Quote Link to comment
xthursdayx Posted December 17, 2021 Share Posted December 17, 2021 Hi, I used to have the iOS app working well, but for some reason the interface stopped updating my server. I deleted the server from the app but am now unable to re-add my server, either by manual address entry or QR code. I don't get any error code, just a perpetually spinning wheel. My firewall is setup to allow traffic from my phone to the server. Any idea what else might be preventing the connection, or a way to access a debug log? Quote Link to comment
NickI Posted January 5, 2022 Share Posted January 5, 2022 (edited) Same here, i have the latest plugin version and i use iOS latest app. My app was not updating and decided to uninstall install and now i am not able to add my server with any of the available options. QR code also works with http://ipaddress:2378. The green link on the plugin settings opens the https://*unraid.net:2379, which is not listening at all at this port. netstat -ntlp | grep -E '(2378|2379)' tcp6 0 0 :::2378 :::* LISTEN 18746/controlr one strange thing i noticed is that the plugin is listening to a IPv6 address which my server only listens to lo interface. Edited January 5, 2022 by NickI Quote Link to comment
jbrodriguez Posted January 5, 2022 Author Share Posted January 5, 2022 Hi, not sure what might be the issue. if your server is connected to the Unraid "cloud", can you disconnect it and try adding the server ? In any case, I'll try to replicate on my 6.10.0-rc2 server. Quote Link to comment
Encore Posted January 24, 2022 Share Posted January 24, 2022 (edited) if i scan the QR code on my iphone i get "unable to add server : {"code".:2301, ...... unable to fetch /Main etc etc. if i add manually without the qr code, all works Edited January 24, 2022 by Encore Quote Link to comment
jbrodriguez Posted February 6, 2022 Author Share Posted February 6, 2022 On 1/24/2022 at 6:34 AM, Encore said: if i scan the QR code on my iphone i get "unable to add server : {"code".:2301, ...... unable to fetch /Main etc etc. if i add manually without the qr code, all works Hi, thanks for the report. So the issue seems to be that the controlr plugin that creates the qrcode is not working correctly. It says that the hostname should be "unraid" but it's not being recognized in the network. What unraid os version you have ? 1 Quote Link to comment
Encore Posted February 13, 2022 Share Posted February 13, 2022 On 2/6/2022 at 2:05 PM, jbrodriguez said: Hi, thanks for the report. So the issue seems to be that the controlr plugin that creates the qrcode is not working correctly. It says that the hostname should be "unraid" but it's not being recognized in the network. What unraid os version you have ? Version: 6.10.0-rc2 in windows i can access via \\unraid without issues Quote Link to comment
Marv Posted February 19, 2022 Share Posted February 19, 2022 no real issue but on my iphone app the banner of my server isn't shown properly. It only shows the top left corner somehow. I'm using a resolution of 1920x90 for the banner. I think this worked in the past. Already tried readding the server without any luck. Quote Link to comment
jbrodriguez Posted February 19, 2022 Author Share Posted February 19, 2022 23 minutes ago, Marv said: no real issue but on my iphone app the banner of my server isn't shown properly. It only shows the top left corner somehow. I'm using a resolution of 1920x90 for the banner. I think this worked in the past. Already tried readding the server without any luck. hi, can you share a picture to get a better idea of the issue ? (mask any personal info if you want) Quote Link to comment
jbrodriguez Posted February 19, 2022 Author Share Posted February 19, 2022 On 2/13/2022 at 5:01 PM, Encore said: in windows i can access via \\unraid without issues i see, but is that the hostname set in Unraid itself ? Quote Link to comment
Encore Posted February 21, 2022 Share Posted February 21, 2022 On 2/19/2022 at 11:21 PM, jbrodriguez said: i see, but is that the hostname set in Unraid itself ? root@unRAID:~# hostname unRAID root@unRAID:~# yea its "unRAID" but for hostname this shouldnt be an issue? Quote Link to comment
Marv Posted February 22, 2022 Share Posted February 22, 2022 On 2/19/2022 at 11:20 PM, jbrodriguez said: hi, can you share a picture to get a better idea of the issue ? (mask any personal info if you want) looks like this on my new server: Quote Link to comment
jbrodriguez Posted February 24, 2022 Author Share Posted February 24, 2022 On 2/21/2022 at 2:58 PM, Encore said: root@unRAID:~# hostname unRAID root@unRAID:~# yea its "unRAID" but for hostname this shouldnt be an issue? you mentioned you access via \\unraid, that's the shares right ? can you access that same way via the browser ? Quote Link to comment
jbrodriguez Posted February 24, 2022 Author Share Posted February 24, 2022 On 2/22/2022 at 12:58 PM, Marv said: looks like this on my new server: i think you mean the banner is smaller right ? i set it smaller in this version, but maybe i can make it centered or a cover, i'll check Quote Link to comment
Marv Posted February 24, 2022 Share Posted February 24, 2022 Yeah, I only see a small part of my banner on the top left corner. Quote Link to comment
Encore Posted February 26, 2022 Share Posted February 26, 2022 (edited) On 2/24/2022 at 2:05 PM, jbrodriguez said: you mentioned you access via \\unraid, that's the shares right ? can you access that same way via the browser ? yes if i use just "unraid" (http://unraid ) in browser, it redicts to unraid just fine ports in LAN are not closed / rejected - all enabled for lan only access edit2: fixed by set a host entrie in openwrt unraid ----- lan ip now on iphone QR scan works maybe a iphone thing bcs on other device it works without openwrt host entrie^^ Edited February 26, 2022 by Encore Quote Link to comment
jbrodriguez Posted March 1, 2022 Author Share Posted March 1, 2022 On 2/26/2022 at 1:12 PM, Encore said: fixed by set a host entrie in openwrt nice to know Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.