binhex Posted June 15, 2017 Author Share Posted June 15, 2017 (edited) 15 hours ago, Bluecube said: Hmmm... A malformed database. Think a reinstall would fix that? if your using CA plugin then it might (not sure @Squid could tell ya) also install the backup plugin as part of CA, and thus you may have a backup of your configuration, in that case you should be able to stop the container, restore the configuration files for this docker and start it again. if you dont have the backup plugin then you either could stop the container and delete the database to force it to re-create it, or delete all files/folders in the /confg folder and start it again to get you back to a default install. Edited June 15, 2017 by binhex Quote Link to comment
wgstarks Posted July 16, 2017 Share Posted July 16, 2017 Got this docker running using @gridrunner video without any problems, except one. Can't add any torrent indexers. When I try adding IP Torrents I get a no response error. Posted on the Radarr forum on reddit and they claim that indexers can't be used with Radarr??? Hard for me to believe that. Maybe someone could confirm if this is true? Quote Link to comment
binhex Posted July 17, 2017 Author Share Posted July 17, 2017 12 hours ago, wgstarks said: Got this docker running using @gridrunner video without any problems, except one. Can't add any torrent indexers. When I try adding IP Torrents I get a no response error. Posted on the Radarr forum on reddit and they claim that indexers can't be used with Radarr??? Hard for me to believe that. Maybe someone could confirm if this is true? i am using a public torrent index sites, and that seems to work fine, i dont have access to any private sites so i cant really comment on this im afraid. Quote Link to comment
wgstarks Posted July 17, 2017 Share Posted July 17, 2017 40 minutes ago, binhex said: i am using a public torrent index sites, and that seems to work fine, i dont have access to any private sites so i cant really comment on this im afraid. Thanks. Couldn't find any public indexers. Everything I checked was invitation only except IP Torrents. Guess I'll take a look at Jackett. Quote Link to comment
binhex Posted July 17, 2017 Author Share Posted July 17, 2017 10 minutes ago, wgstarks said: Thanks. Couldn't find any public indexers. Everything I checked was invitation only except IP Torrents. Guess I'll take a look at Jackett. rarbg is public, give it a go. Quote Link to comment
wgstarks Posted July 17, 2017 Share Posted July 17, 2017 10 minutes ago, binhex said: rarbg is public, give it a go. Just took a quick look, but that appears to be "invitation only" as well. Quote Link to comment
binhex Posted July 17, 2017 Author Share Posted July 17, 2017 12 minutes ago, wgstarks said: Just took a quick look, but that appears to be "invitation only" as well. well i certainly don't have an invitation or a registration and it works for me :-) Quote Link to comment
wgstarks Posted July 17, 2017 Share Posted July 17, 2017 31 minutes ago, binhex said: well i certainly don't have an invitation or a registration and it works for me :-) You're right. I went ahead and set it up in Radarr and it works. Not sure what the website registration credentials are for. Thanks. Quote Link to comment
alexdodd Posted August 11, 2017 Share Posted August 11, 2017 (edited) Ok, so i will make a detailed thread shortly, but it looks like its not quite so automated. I choose a film on Radarr, add that to my library, then ask it to search, it finds the right nzb/torrent and sends it to the correct client. Client then does it job, finishes off and unpacks. At this stage Radarr can see its finished and reports "No files found are eligible for import in *dir*". Which would have me thinking something has renamed something somewhere, but the dir it gives has files, and if I manually import (but not the button on the activity section, the one on the wanted tab), I can add it to my library and Radarr moves and renames fine. What can I give you that would make diagnosing easiest? Logs, settings, or something else? //Fixed it myself, its not clear that the data folder has to be set EXACTLY the same all around, i had it pointed to a completed folder thinking that would also work as it was were things were completed. Edited August 19, 2017 by alexdodd Quote Link to comment
treylek Posted August 12, 2017 Share Posted August 12, 2017 I have tried everything I can think of to get this to work, but the GUI never loads. Ever. I always get the same This site can’t be reached 192.168.0.102 refused to connect. Try: Checking the connection Checking the proxy and the firewall ERR_CONNECTION_REFUSED All my other dockers, including other binhex ones load up the webgui without issues. Can anyone suggest something I should change? Here's the log: 2017-08-11 19:44:21.949945 [info] Host is running unRAID2017-08-11 19:44:21.996666 [info] System information Linux 5a0b211c3544 4.9.30-unRAID #1 SMP PREEMPT Fri May 26 13:56:36 PDT 2017 x86_64 GNU/Linux2017-08-11 19:44:22.057559 [info] PUID defined as '99'2017-08-11 19:44:22.112529 [info] PGID defined as '100'2017-08-11 19:44:22.349018 [info] UMASK defined as '000'2017-08-11 19:44:22.388879 [info] Permissions already set for volume mappings2017-08-11 19:44:22.480067 [info] Starting Supervisor...2017-08-11 19:44:22,881 CRIT Set uid to user 02017-08-11 19:44:22,882 INFO Included extra file "/etc/supervisor/conf.d/radarr.conf" during parsing2017-08-11 19:44:22,885 INFO supervisord started with pid 72017-08-11 19:44:23,888 INFO spawned: 'radarr' with pid 422017-08-11 19:44:23,888 INFO reaped unknown pid 82017-08-11 19:44:24,890 INFO success: radarr entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)2017-08-11 19:44:24,971 DEBG 'radarr' stdout output:2017-08-11 19:44:24,977 DEBG 'radarr' stdout output:Press enter to exit... Thanks you Quote Link to comment
alexdodd Posted August 19, 2017 Share Posted August 19, 2017 (edited) How do I go about enabling SSL, i've flicked the setting, but nothing happens when i try the address:port? https://myserver:8787 The setting in radarr says that i require to run as administrator but im not quite sure how that translates to the docker? Edited August 19, 2017 by alexdodd Quote Link to comment
hmgnsd Posted August 19, 2017 Share Posted August 19, 2017 Hello! I've been trying to troubleshoot an issue with the developers of Radarr and they've asked me to run 'mediainfo' on a file in my library. I'm having trouble running this command in the docker and they've asked me to check that the docker contains 'libmediainfo' so I can run: mediainfo --Output=HTML your_file.mkv And then I'll need to know where the file outputs? Thanks inm advance for any assistance you might be able to offer. Quote Link to comment
Squid Posted August 20, 2017 Share Posted August 20, 2017 14 hours ago, hmgnsd said: Hello! I've been trying to troubleshoot an issue with the developers of Radarr and they've asked me to run 'mediainfo' on a file in my library. I'm having trouble running this command in the docker and they've asked me to check that the docker contains 'libmediainfo' so I can run: mediainfo --Output=HTML your_file.mkv And then I'll need to know where the file outputs? Thanks inm advance for any assistance you might be able to offer. docker exec -it radarr /bin/bash followed by mediainfo --Output=HTML /path/to/your/file.mkv Will out the results to the screen. To save it to a file, add to the end of the command > /path/To/WhereToSave/output.html Note that all paths are based on the container path you've specified within the template, not unRaid's normal paths. Quote Link to comment
hmgnsd Posted August 20, 2017 Share Posted August 20, 2017 2 minutes ago, Squid said: docker exec -it radarr /bin/bash followed by mediainfo --Output=HTML /path/to/your/file.mkv Will out the results to the screen. To save it to a file, add to the end of the command > /path/To/WhereToSave/output.html Note that all paths are based on the container path you've specified within the template, not unRaid's normal paths. Awesome! Thank you! Will try it out when I'm back home! Linux is not my strong suit but unRAID forums are always so helpful! Quote Link to comment
Squid Posted August 20, 2017 Share Posted August 20, 2017 12 minutes ago, hmgnsd said: Awesome! Thank you! Will try it out when I'm back home! Linux is not my strong suit but unRAID forums are always so helpful! I'll save you the time. I posted thinking you were on the lsio flavour. On Binhex's libmediainfo is there, but the mediainfo command is not. Quote Link to comment
hmgnsd Posted August 20, 2017 Share Posted August 20, 2017 Is it something I or binhex can add to the docker? Now I'm wondering if it's missing functionality seeing as the dev asked me to run the command. Quote Link to comment
alexdodd Posted August 20, 2017 Share Posted August 20, 2017 Hmmm, I'm using binhex-delugevpn for privoxy, and everything works fine with my browser proxy switcher, and with sonarr, but if i use the same settings in radarr i lose connection to my indexers and my download clients sab/deluge. If i switch back to direct on radarr, everything resumes communicating. Quote Link to comment
Tybio Posted August 20, 2017 Share Posted August 20, 2017 2 hours ago, hmgnsd said: Is it something I or binhex can add to the docker? Now I'm wondering if it's missing functionality seeing as the dev asked me to run the command. The file is in your library, your library isn't in the docker. Just install the Nerdpack plugin and then add mediainfo to unraid and process the file. Mediainfo output isn't going to change based on running it from within the docker or not (And if it does, we have a much bigger problem here Quote Link to comment
hmgnsd Posted August 20, 2017 Share Posted August 20, 2017 55 minutes ago, Tybio said: The file is in your library, your library isn't in the docker. Just install the Nerdpack plugin and then add mediainfo to unraid and process the file. Mediainfo output isn't going to change based on running it from within the docker or not (And if it does, we have a much bigger problem here ?? Also realised I can run it on my computer and point it at media files on my server Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 Think I've finally figured out why my permissions keep getting screwed up. Every time radarr imports a movie it changes the perms for the folder. Not sure what setting to use? This is the current setting. Also tried chown User = nobody chown Group = users (that worked sometimes) and Set Permissions = No (that was a total failure). Does this look correct? Quote Link to comment
binhex Posted September 4, 2017 Author Share Posted September 4, 2017 6 hours ago, wgstarks said: Think I've finally figured out why my permissions keep getting screwed up. Every time radarr imports a movie it changes the perms for the folder. Not sure what setting to use? This is the current setting. Also tried chown User = nobody chown Group = users (that worked sometimes) and Set Permissions = No (that was a total failure). Does this look correct? this is more a question about radarr than the docker container, so you probably would be best asking on the radarr forum/github, but i guess you could simply switch set permissions to no?, the umask settings i apply should then not be stamped over, having said that permissions of 666, should give you read and write for user, group, and other so that should be ok, change file permissions to 0777 if you want to allow execute as well. Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 3 hours ago, binhex said: this is more a question about radarr than the docker container, so you probably would be best asking on the radarr forum/github, but i guess you could simply switch set permissions to no?, the umask settings i apply should then not be stamped over, having said that permissions of 666, should give you read and write for user, group, and other so that should be ok, change file permissions to 0777 if you want to allow execute as well. Thanks. Tried setting the switch to NO and wound up with no access at all to all the folders that radarr had written for each movie. Right now I am using- File chmod mask = 0666 Folder chmod mask = 0777 chown User = nobody chown Group = users These settings seem to work best, but something keeps changing permissions on my cache drive. Quote Link to comment
wgstarks Posted September 4, 2017 Share Posted September 4, 2017 I'm still testing <fingers crossed> but it appears this is all caused by the way I was connecting to the share on my Mac. The SMB settings for the share were originally "Private" and I was connecting with user credentials. I've still got more reading to do, but it looks like this sets special permissions. I changed the SMB shares to public (they're just a bunch of videos anyway ) with OS X support enabled and connect as guest and now have default (nobody/users) permissions. Quote Link to comment
stinger303 Posted September 13, 2017 Share Posted September 13, 2017 (edited) Hello, I'm hoping one of you have ran into this. I have trailer files for every movie I have. They sit inside the same folder as the regular movie but with a - trailer at the end of the file name. How would I stop radarr from thinking that the trailer file needs to be upgraded to a Bluray quality file? It's done this to me a few time so now I have 2 Jaws 1080p movie files instead of one movie file and a trailer file. I would rather not have to put the trailers in a separate folder as I have well over 1000 movies with trailers within the main movie folder. Thanks, Chris Edited September 13, 2017 by stinger303 Quote Link to comment
dstanley Posted October 1, 2017 Share Posted October 1, 2017 (edited) This docker has been working GREAT for me - thank you so much! Noticed an error in my log files about fonts: StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-semibold.ttf not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-semibold.woff not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-semibold.woff2 not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-light.ttf not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-regular.ttf not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-light.woff not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-regular.woff not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-light.woff2 not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-regular.woff2 not found When I ssh into the docker and check the folders in the Content directory I see that the fonts folder is called Fonts (with a capital) and apparently Radarr is looking for fonts (no capital). I am very limited in my linux so some help in correcting this would be appreciated - thanks! Dwight NOTE: I copied Fonts folder and contents to 'fonts' within the container - need to know how this could be done permanently I think!? Edited October 1, 2017 by dstanley Modified Docker Container Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.