binhex Posted October 2, 2017 Author Share Posted October 2, 2017 (edited) On 01/10/2017 at 2:12 AM, dstanley said: This docker has been working GREAT for me - thank you so much! Noticed an error in my log files about fonts: StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-semibold.ttf not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-semibold.woff not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-semibold.woff2 not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-light.ttf not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-regular.ttf not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-light.woff not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-regular.woff not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-light.woff2 not found StaticResourceMapper File /usr/lib/radarr/UI/Content/fonts/opensans-regular.woff2 not found When I ssh into the docker and check the folders in the Content directory I see that the fonts folder is called Fonts (with a capital) and apparently Radarr is looking for fonts (no capital). I am very limited in my linux so some help in correcting this would be appreciated - thanks! Dwight NOTE: I copied Fonts folder and contents to 'fonts' within the container - need to know how this could be done permanently I think!? this is most definitely a coding issue with radarr, so you will need to open an issue on their github repo (assuming its not already been fixed in master branch), link:- https://github.com/Radarr/Radarr/issues edit - looks like its been submitted as a bug and fixed, so will appear in the next release (whenever they press the button). https://github.com/Radarr/Radarr/issues/2065 Edited October 2, 2017 by binhex 1 Quote Link to comment
m.b.d Posted November 27, 2017 Share Posted November 27, 2017 My Radarr install was working great until I had I had an issue with my cache drive getting full before mover kicked in and moved everything. This caused all sorts of problem with my dockers as they didn't have the available space to run. I removed all my dockers, cleared my cache drive and replaced it with a larger drive. I have since re installed my dockers but for some reason now Radarr is not working correctly. System Info Unraid - 6.3.5 binhex Radarr - Up To Date binhex NZBGet - Up To Date Also Running Sonarr with no issues... Whats Working. Tested Radarr to connect to Indexers (nzbGeek) - Sucessful Tested Radarr to connect to Download Client - Successful nzbGet Test to Eweka - Successful The Problem. When I add a new movies, either from my library or a new title I'd like to add to my library I can do a manual search (my preferred method for movies) Click on the download in the search field and it tells me in the lower right its been added to active que but never shows up in nzbgets. something in the move from sonarr to nzbgets is broken and I've looked an poked around but didn't know what could be wrong. Quote Link to comment
ThEgOg Posted November 29, 2017 Share Posted November 29, 2017 i've recently re-installed sab, sonarr and radarr using gridrunners excellent youtube walkthroughs, i deleted my previous versions due to them never working correctly. Sab and Sonarr are now doing their thing thing flawlessly. Radarr however isn't moving completed movies into my movie folder (mnt/user/Video2/Movies/) , this is how the mappings are set in Radarr /data /mnt/user/downloads//media /mnt/user/Video2/Movies//config /mnt/user/appdata/binhex-radarr then in sab i have the category called "movies" with the path /data/complete/movies (the folder i created as advised in the walkthrough). the completed files are downloading into that folder and staying in there. should i set the path in the sab category to /media? then this will download directly into my movie folder? apologies if these are stupid questions but i'm just trying to get everything working as it should for once:) many thanks for your time Quote Link to comment
wgstarks Posted November 29, 2017 Share Posted November 29, 2017 (edited) IIRC the /data paths must be exactly the same for Radarr and sab. Edit: Copy the path you have set for sab and paste it into Radarr. Edited November 29, 2017 by wgstarks Quote Link to comment
ThEgOg Posted November 30, 2017 Share Posted November 30, 2017 i now have it set up like this /media /mnt/user/Video2/Movies//config /mnt/user/appdata/binhex-radarr/data /mnt/user/downloads/complete/movies/ is that what you meant? i've tested a download and it still downloads to the folder set in sab /data/complete/movies then it remains in that folder? many thanks for the help Quote Link to comment
Squid Posted November 30, 2017 Share Posted November 30, 2017 1 minute ago, ThEgOg said: i now have it set up like this /media /mnt/user/Video2/Movies//config /mnt/user/appdata/binhex-radarr/data /mnt/user/downloads/complete/movies/ is that what you meant? i've tested a download and it still downloads to the folder set in sab /data/complete/movies then it remains in that folder? many thanks for the help /data does not match between the two applications. Here's why it doesn't work the way you have it. https://forums.lime-technology.com/topic/57181-real-docker-faq/?page=2#comment-566086 Quote Link to comment
ThEgOg Posted November 30, 2017 Share Posted November 30, 2017 thanks for the help Squid:) so in my case to copy the faq like below: App Name Container Volume Host Volume nzbGet /config /mnt/cache/appdata/nzbget /downloads /mnt/cache/appdata/downloads sonarr /config /mnt/cache/appdata/sonarr /downloads /mnt/cache/appdata/downloads i've now setup like this: Radarr: /data /mnt/user/downloads//media /mnt/user/Video2/Movies//config /mnt/user/appdata/binhex-radarr Sab: data /mnt/user/downloads//config /mnt/user/appdata/binhex-sabnzbd the completed movie download files are still going into downloads/complete/movies/ which i'm assuming is as i have the movie category path in sab set to /data/complete/movies?? i want when finished to go into my main movie folder on the server should i be mapping another path in the sab docker to my movie folder on my server /mnt/video2/movies/ then making that the movie category path in sab? thanks again for your time Quote Link to comment
Squid Posted November 30, 2017 Share Posted November 30, 2017 thanks for the help Squid:) so in my case to copy the faq like below: App Name Container Volume Host Volume nzbGet /config /mnt/cache/appdata/nzbget /downloads /mnt/cache/appdata/downloads sonarr /config /mnt/cache/appdata/sonarr /downloads /mnt/cache/appdata/downloads i've now setup like this: Radarr: /data /mnt/user/downloads//media /mnt/user/Video2/Movies//config /mnt/user/appdata/binhex-radarr Sab: data /mnt/user/downloads//config /mnt/user/appdata/binhex-sabnzbd the completed movie download files are still going into downloads/complete/movies/ which i'm assuming is as i have the movie category path in sab set to /data/complete/movies?? i want when finished to go into my main movie folder on the server should i be mapping another path in the sab docker to my movie folder on my server /mnt/video2/movies/ then making that the movie category path in sab? thanks again for your time Nope. Radarr handles all the moving for you from the completed folder that sab tells radarr the file is sitting in Quote Link to comment
ThEgOg Posted November 30, 2017 Share Posted November 30, 2017 with it setup like above it is still leaving the files in downloads/complete/movies/, not moving them to my movie folder? do i even use the movie category in sab or just leave all the categories blank? Quote Link to comment
Squid Posted December 1, 2017 Share Posted December 1, 2017 with it setup like above it is still leaving the files in downloads/complete/movies/, not moving them to my movie folder? do i even use the movie category in sab or just leave all the categories blank?Post the logs from radarr after you've made the adjustmebt Quote Link to comment
ThEgOg Posted December 1, 2017 Share Posted December 1, 2017 Please see attached for the latest full log, keeps coming up with the text Couldn't import movie /data/complete/Reservoir Dogs 1992 1080p BluRay DTS x264-CyTSuNee/Reservoir.Dogs.1992.1080p.BluRay.DTS.x264-CyTSuNee.mkv: Root folder '/completed movies/' was not found. thanks again Squid radarr.txt Quote Link to comment
ThEgOg Posted December 1, 2017 Share Posted December 1, 2017 this is how i have Radarr and Sab dockers setup Quote Link to comment
bovick Posted December 10, 2017 Share Posted December 10, 2017 I'm having a strange problem. I have sonarr and radarr. Sonarr is working great. Radarr works great initially but at some point (I think it's server reboot, but not sure) I come back to it with no response from radarr gui on port 7878. Removing and reinstalling the docker doesn't work either until I delete all the associated appdata and start all over again. There is no change to the configuration. It just fails to start after being stopped and then never starts again. Could this have something to do with Mono? Googled and found others with this issue, but no solution or real discussion. Quote Link to comment
bovick Posted December 24, 2017 Share Posted December 24, 2017 Like another user, I'm getting "Press enter to exit... " in my log after services are started and when I try to access the webui: _ _ _| |___| (_) ___| / __| | |/ _ \| \__ \ | | (_) ||_|___/ |_|\___/|_|Brought to you by linuxserver.ioWe gratefully accept donations at:https://www.linuxserver.io/donations/-------------------------------------GID/UID-------------------------------------User uid: 99User gid: 100-------------------------------------[cont-init.d] 10-adduser: exited 0.[cont-init.d] 30-config: executing...[cont-init.d] 30-config: exited 0.[cont-init.d] done.[services.d] starting services[services.d] done.Press enter to exit... Quote Link to comment
Squid Posted December 24, 2017 Share Posted December 24, 2017 6 hours ago, bovick said: Brought to you by linuxserver.io Probably best to post here https://forums.lime-technology.com/topic/53758-support-linuxserverio-radarr/ Quote Link to comment
woble Posted January 18, 2018 Share Posted January 18, 2018 Is there a way to use `nightly` instead of `develop` branch of Radarr. Perhaps a separate docker is required for that? Same goes for the nzbget, `develop` instead of `stable`, and sonar. Any chance you could create those dockers if there's no way with the current ones. Quote Link to comment
binhex Posted January 18, 2018 Author Share Posted January 18, 2018 11 hours ago, woble said: Is there a way to use `nightly` instead of `develop` branch of Radarr. Perhaps a separate docker is required for that? Same goes for the nzbget, `develop` instead of `stable`, and sonar. Any chance you could create those dockers if there's no way with the current ones. im afraid this isn't going to get done, i only produce docker images based off the most stable releases, maybe look at LS versions, these may support bleeding edge versions via env var Quote Link to comment
bah1976 Posted January 29, 2018 Share Posted January 29, 2018 Ok, I don't know what happened, or when, but my radarr thinks I'm new all of a sudden. "You must be new around here, before you start adding movies you may want to check out the following links on our wiki" But it also says: Downloaded and Monitored: 35 Downloaded, but not Monitored: 624 It may have happened when I updated unraid to 6.4 - that was a few weeks ago and I don't know that I've been in here since. But even though I can look at my /media folder from inside the docker and see everything, Radarr doesn't "know" about it? I tried to bulk import the folders, and it says no movies were found. My equivalent Sonarr works fine. Do I have to delete this docker's appdata and start over? Or is there something I can do to fix this? Appreciate any tips. Quote Link to comment
jebusfreek666 Posted February 10, 2018 Share Posted February 10, 2018 (edited) I'm sure this is just something dumb that I am missing, a button not clicked somewhere or something. But I have looked through it for a bit and can't seem to figure it out. Radarr is downloading to "incomplete" folder via deluge When DL is finished, it moves it to "complete" folder via deluge setting Radarr is then renaming to the correct format, and placing in my media->movies folder (or, I guess mover is actually moving them?) The problem lies in the fact that it doesn't seem to just be renaming and moving the file, it seems to be copying and renaming, leaving the original file in the "complete" folder. Like I said, I am sure I just missed a setting somewhere to delete this, or possibly I am messing it up by removing the torrent from deluge when the completed ones start to pile up. Or, maybe it is copying the file and renaming due to the fact that the original is seeding at that point? Just a couple ideas, none of which I am certain how to solve. Can anyone point me in the right direction? Don't want to mess with the settings and mess something else up. Edited February 10, 2018 by jebusfreek666 Quote Link to comment
wgstarks Posted February 10, 2018 Share Posted February 10, 2018 (edited) You have the option in settings to select either copy or move in your download handling. Edit: Sorry, that’s wrong. It’s in the download client section- Edited February 10, 2018 by wgstarks Quote Link to comment
jebusfreek666 Posted February 10, 2018 Share Posted February 10, 2018 50 minutes ago, wgstarks said: You have the option in settings to select either copy or move in your download handling. Edit: Sorry, that’s wrong. It’s in the download client section- Wonderful. I will check it when I get home. Thanks again! Quote Link to comment
jebusfreek666 Posted February 10, 2018 Share Posted February 10, 2018 (edited) Ok, So now I think what is really happening is that it is creating hardlinks with the files original name. Here is what I am seeing: As you can see, in my media share everything is renamed correctly and placed in the correct place. But in my downloads share, it still remains with the downloaded torrent name. Both say they are on disk 2. Both are the "same size". my understanding is that they both point to the same file, but only use up the stated 14Gb once. The issue comes in that I want to clean up the download folder. How do I get rid of these? Can I just delete them? If so, how to I do this? Is it as simple as navigating to mnt/download/completed and deleting everything in there or will this mess something else up? Also, do I change the option from hardlink to copy, and then just manually delete the second copy periodically? I originally left this option on because it said it may not be able to move/rename if it wasn't on. Which would create a different problem.... Edited February 10, 2018 by jebusfreek666 more info Quote Link to comment
wgstarks Posted February 10, 2018 Share Posted February 10, 2018 You don't mention you're settings, but I think what you need is this- Be sure that "Use Hard Links Instead Of Copy" is set to NO. Also, "Remove Completed Downloads" must be set to YES (don't copy my setting). Quote Link to comment
jebusfreek666 Posted February 10, 2018 Share Posted February 10, 2018 27 minutes ago, wgstarks said: You don't mention you're settings, but I think what you need is this- Be sure that "Use Hard Links Instead Of Copy" is set to NO. Also, "Remove Completed Downloads" must be set to YES (don't copy my setting). Will that remove the hard links that are already there from previous downloads, or will I have to go manually to the share mnt/downloads/completed and just delete everything there? My settings currently in download client are the same as the pic above, except I have completed download handling "remove" set to yes. And for media management I have rename folders, and hard links set to yes. All others set to no from the picture above. Quote Link to comment
wgstarks Posted February 10, 2018 Share Posted February 10, 2018 Ok, so you'll want to set hard links to "NO". My GUESS is that this will only effect future downloads. You'll need to test this probably and possibly fix the problem manually. Since this is really an app issue (not the docker itself) I'd also recommend posting your question on the Radarr forum. You might find much more informed info there. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.