Ptolemyiv Posted July 15 Share Posted July 15 I am using AWS authentication so may be specific to that Quote Link to comment
MarianKoniuszko Posted July 23 Share Posted July 23 Hello, can I replace `jlesage/nginx-proxy-manager` for `lepresidente/nginx-proxy-manager:dev` if I want to install crowdsec? Will that work? or I have to remove my NPM and install NPM-Crowdsec instance? Regards. Quote Link to comment
CopesaCola Posted July 27 Share Posted July 27 Just built a new server and now my sites aren't connecting, does anyone know where I should start to troubleshoot? Quote Link to comment
mattie112 Posted July 27 Share Posted July 27 1 minute ago, CopesaCola said: Just built a new server and now my sites aren't connecting, does anyone know where I should start to troubleshoot? The logs? 1 Quote Link to comment
hanzo Posted July 27 Share Posted July 27 On 5/30/2024 at 10:18 PM, RaptorBeaver said: I don't want to access to my server from outside I just want users when connected to my local network to get access to services through subdomains. I change my DNS records with an A / mydomain.com / 192.168.1.50 (unraid local IP) I deployed jlesage/nginx-proxy-manager tried every network config... host, bridge, br0 etc. I get access to the webui, no problem. I try to config my subdomains... Again, not my first time, don't think the problem is with this config. --> Everytime i try to connect to any subdomain i go to the unraid login page... Like nginx was not catching the request... I get this exact problem, been spending all day on it... still no solution. 😞 Quote Link to comment
Kilrah Posted July 27 Share Posted July 27 (edited) You need to move unraid's gui to other ports so you can run the NPM container on ports 80/443, just like what was answered to the post you quoted. Edited July 27 by Kilrah Quote Link to comment
Goldmaster Posted July 27 Share Posted July 27 (edited) Hi there Are you going to Disable TLS 1.0 and TLS 1.1? Reason for asking is that they are not supported any more and if one scans here https://www.ssllabs.com/ssltest/index.html the grade is capped at B or do i have to follow this guide here Many thanks for your help Edited July 27 by Goldmaster Quote Link to comment
mattie112 Posted July 27 Share Posted July 27 8 hours ago, Kilrah said: You need to move unraid's gui to other ports so you can run the NPM container on ports 80/443, just like what was answered to the post you quoted. Or run it on a different IP all together. That should also work (so bridge network) Quote Link to comment
mattie112 Posted July 27 Share Posted July 27 6 hours ago, Goldmaster said: Hi there Are you going to Disable TLS 1.0 and TLS 1.1? Reason for asking is that they are not supported any more and if one scans here https://www.ssllabs.com/ssltest/index.html the grade is capped at B or do i have to follow this guide here Many thanks for your help You can create your own config file and "overwrite" that with a docker volume. I do the same and it works perfectly. Quote Link to comment
CopesaCola Posted July 27 Share Posted July 27 10 hours ago, mattie112 said: The logs? Sorry, here you go terranas-diagnostics-20240727-1414.zip Quote Link to comment
Goldmaster Posted July 28 Share Posted July 28 17 hours ago, mattie112 said: "overwrite" that with a docker volume. So just follow the info in the forum post I found? If the docker container gets updated, would it not revert to a default state? Or could I submit a pull request to address the issue to help others. Quote Link to comment
mattie112 Posted July 28 Share Posted July 28 18 hours ago, CopesaCola said: Sorry, here you go terranas-diagnostics-20240727-1414.zip 139.36 kB · 0 downloads I am currently on holiday and I can't really go through a zip on mobile . I want to suggest to open the docker logs of NPM and see if it logs anything when you open your site. Can you check and paste a bit of log here if that's the case? Quote Link to comment
mattie112 Posted July 28 Share Posted July 28 22 minutes ago, Goldmaster said: So just follow the info in the forum post I found? If the docker container gets updated, would it not revert to a default state? Or could I submit a pull request to address the issue to help others. If you mount a file in docker it will always overwrite what is present. (but feel free to create a PR). I did do this way, I think if you search in this topic you should find my post with the file I use. Quote Link to comment
Goldmaster Posted July 28 Share Posted July 28 (edited) 2 hours ago, mattie112 said: free to create a PR Many thanks for your help, is that on the official ngxproxy manager github I can see there is support here. There is also this github issue. So I am not sure why this is not the case? Or am I missing something? update for cloudlfare, follow this guide https://servebolt.com/help/technical-resources/how-to-get-an-a-rating-with-cloudflare-ssl/ now i am sorted Edited July 28 by Goldmaster set minimum tls to 1.2 Quote Link to comment
Kilrah Posted July 28 Share Posted July 28 23 minutes ago, Goldmaster said: Or am I missing something? What's the actual problem? AFAIK NPM should not affect that, I have A+ results on domains proxied by NPM, seems it's the service you're proxying that needs changes if you can't get that, not NPM Quote Link to comment
CopesaCola Posted July 31 Share Posted July 31 On 7/28/2024 at 8:17 AM, mattie112 said: I am currently on holiday and I can't really go through a zip on mobile . I want to suggest to open the docker logs of NPM and see if it logs anything when you open your site. Can you check and paste a bit of log here if that's the case? You're good, I just had to reset the port forwarding, it had reset. Quote Link to comment
matuopm Posted September 5 Share Posted September 5 How can i change the internal container ports to 80 and 443 instead of 8080 and 4443 ? I use this container inside a tailscale container and need the ports to be that way since i do not forward Quote Link to comment
alturismo Posted September 6 Share Posted September 6 7 hours ago, matuopm said: How can i change the internal container ports to 80 and 443 instead of 8080 and 4443 ? looks like this docker is not designed to change it Quote Link to comment
mattie112 Posted September 6 Share Posted September 6 I do have a fork that only changes the ports to 80/443 that I have been using for quite some time. (And I think also a couple of other people). Let me update it real quick with all the latest changes as I have not done that in quite some time https://hub.docker.com/repository/docker/mattie112/docker-nginx-proxy-manager I will report here when I updated / tested it, will be somewhere today. Quote Link to comment
Kilrah Posted September 6 Share Posted September 6 10 hours ago, matuopm said: How can i change the internal container ports to 80 and 443 instead of 8080 and 4443 ? I use this container inside a tailscale container and need the ports to be that way since i do not forward Use this one instead Quote Link to comment
mattie112 Posted September 6 Share Posted September 6 22 minutes ago, mattie112 said: I do have a fork that only changes the ports to 80/443 that I have been using for quite some time. (And I think also a couple of other people). Let me update it real quick with all the latest changes as I have not done that in quite some time https://hub.docker.com/repository/docker/mattie112/docker-nginx-proxy-manager I will report here when I updated / tested it, will be somewhere today. Ah, that wasn't so bad Everything has been updated again if someone wants to use it. Quote Link to comment
Hawkins12 Posted September 6 Share Posted September 6 I have been using SWAG for some time but would like to transition to NGINX PM for various reasons (really ease of use). When I installed and went to set up the proxy, I got the error that the domain was already in use. I tried revoking my certificates via SWAG/Cert Bot however, I still wasn't to fix the issue. Do you have or are you aware of the steps on how to migrate (certificates) from SWAG to NGINX PM? Particularly, I am using SWAG for Nextcloud. Quote Link to comment
mattie112 Posted September 6 Share Posted September 6 You can technically migrate certificates. But: you don't need to, if everything is set up you just get new certificates from letsencrypt. What exactly is the problem? And how is it set up? Quote Link to comment
Hawkins12 Posted September 6 Share Posted September 6 10 minutes ago, Hawkins12 said: I have been using SWAG for some time but would like to transition to NGINX PM for various reasons (really ease of use). When I installed and went to set up the proxy, I got the error that the domain was already in use. I tried revoking my certificates via SWAG/Cert Bot however, I still wasn't to fix the issue. Do you have or are you aware of the steps on how to migrate (certificates) from SWAG to NGINX PM? Particularly, I am using SWAG for Nextcloud. So when I try to obtain new SSL, I get this. Not that I do have HSTS enabled via cloudflare. However, when I uncheck the box, it seems to work but I get this: It seems to not want to issue a new cert because one is already issued. I actually tried to revoke (and delete) my cert in SWAG but that didnt seem to work either Quote Link to comment
mattie112 Posted September 6 Share Posted September 6 Can you chech the certificate view in NPM? Perhaps it did made one and you can just use it. Or chech the drop down where it says 'request new' Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.