oldfart Posted April 13, 2021 Share Posted April 13, 2021 Probably a HomeAssistant problem. I get the MQTT messages at my HA when starting unraid-api and when anything changes (start/stop a docker) so, the MQTT bit is working! but MQTT auto discovery on HA does not work - I have no unraid entities listed in HA any ideas? Quote Link to comment
ElectricBrainUK Posted April 14, 2021 Author Share Posted April 14, 2021 15 hours ago, oldfart said: Probably a HomeAssistant problem. I get the MQTT messages at my HA when starting unraid-api and when anything changes (start/stop a docker) so, the MQTT bit is working! but MQTT auto discovery on HA does not work - I have no unraid entities listed in HA any ideas? Do you have auto discovery enabled in your home assistant mqtt config? And do you have it configured to the same base topic that the unraid api broadcasts on? Quote Link to comment
oldfart Posted April 17, 2021 Share Posted April 17, 2021 (edited) auto discovery is enabled by default - so yes. still messing with config file, could use an example if possible so far I got messages in HA: one example - Message 51 received on homeassistant/tower/unifivideo at 23:24: { "id": "01bf4d6e-9ed7-39d0-2d3b-af595f3d5398", "status": "started", "coreCount": "2", "ram": "4096M", "primaryGPU": "VNC:5900", "name": "unifivideo", "mac": "52:54:00:38:64:fc" } QoS: 0 - Retain: false my config.yaml: mqtt: discovery: true discovery_prefix: homeassistant/tower Edited April 17, 2021 by oldfart Quote Link to comment
ElectricBrainUK Posted April 18, 2021 Author Share Posted April 18, 2021 17 hours ago, oldfart said: auto discovery is enabled by default - so yes. still messing with config file, could use an example if possible so far I got messages in HA: one example - Message 51 received on homeassistant/tower/unifivideo at 23:24: { "id": "01bf4d6e-9ed7-39d0-2d3b-af595f3d5398", "status": "started", "coreCount": "2", "ram": "4096M", "primaryGPU": "VNC:5900", "name": "unifivideo", "mac": "52:54:00:38:64:fc" } QoS: 0 - Retain: false my config.yaml: mqtt: discovery: true discovery_prefix: homeassistant/tower That's correct except the discovery prefix should just be homeassistant (without /tower) 1 Quote Link to comment
oldfart Posted April 18, 2021 Share Posted April 18, 2021 5 hours ago, ElectricBrainUK said: That's correct except the discovery prefix should just be homeassistant (without /tower) Thanks a lot - now working 1 Quote Link to comment
Jokerigno Posted April 19, 2021 Share Posted April 19, 2021 Hi, it is "normal" that even if I removed this docker (because it cause cpu peak) I still can see a process unraid-api consuming 10% of my cpu? Quote Link to comment
ElectricBrainUK Posted April 19, 2021 Author Share Posted April 19, 2021 2 minutes ago, Jokerigno said: Hi, it is "normal" that even if I removed this docker (because it cause cpu peak) I still can see a process unraid-api consuming 10% of my cpu? No that is not normal but killing the process or rebooting your server should fix Quote Link to comment
Jokerigno Posted April 19, 2021 Share Posted April 19, 2021 (edited) 42 minutes ago, ElectricBrainUK said: No that is not normal but killing the process or rebooting your server should fix I rebooted but it's still there. If you remember me I'm the say guy who noticed that there's a warning message in HA. Quote 21-04-19 13:17:34 WARNING (MainThread) [supervisor.addons.validate] Add-on config 'startup' with 'before' is deprecated. Please report this to the maintainer of Unraid API I think there are spare pieces in my config and I would like to delete them and start all over. Can you suggest me how to remove all traces in HA and Unraid? Edited April 19, 2021 by Jokerigno Quote Link to comment
ElectricBrainUK Posted April 19, 2021 Author Share Posted April 19, 2021 8 hours ago, Jokerigno said: I rebooted but it's still there. If you remember me I'm the say guy who noticed that there's a warning message in HA. I think there are spare pieces in my config and I would like to delete them and start all over. Can you suggest me how to remove all traces in HA and Unraid? In unraid with the docker removed and the app data config deleted you should be fine. For HA I'm less familiar but removing the docker and then all data in the share as well as any references in the config should work fine. For others that come across the issue with cpu usage that jokeringo and I have discussed here there is a solution: https://github.com/ElectricBrainUK/UnraidAPI/issues/33 1 Quote Link to comment
Driveman Posted May 7, 2021 Share Posted May 7, 2021 Hi everyone i have a question regarding this application. Is there any way to make the web UI only be reachable over HTTPS and having authentication or is this not supported yet? Quote Link to comment
ElectricBrainUK Posted May 10, 2021 Author Share Posted May 10, 2021 On 5/7/2021 at 2:31 PM, Driveman said: Hi everyone i have a question regarding this application. Is there any way to make the web UI only be reachable over HTTPS and having authentication or is this not supported yet? Hey, currently HTTPS is not supported, you can force it to authenticate more requests by setting the KeyStorage variable to secure Quote Link to comment
svh1985 Posted May 18, 2021 Share Posted May 18, 2021 Is there a way to secure the webui and api? Currently everyone on the lan can stop and start the array. Thanks! Quote Link to comment
ElectricBrainUK Posted May 18, 2021 Author Share Posted May 18, 2021 (edited) 13 minutes ago, svh1985 said: Is there a way to secure the webui and api? Currently everyone on the lan can stop and start the array. Thanks! Hey, it should prompt you for a username and password if you set the keystorage variable to secure, however you will also have to authenticate rest requests. Otherwise you could put the UI behind some other reverse proxy or something that adds auth Edited May 18, 2021 by ElectricBrainUK Quote Link to comment
paulmorabi Posted May 30, 2021 Share Posted May 30, 2021 I've suddenly started noticing these errors: Get VM Details for ip: 192.168.1.66 Failed Request failed with status code 503 There's nothing else I can see in the logs. When I access the WebUI, I can log in and the details for the VM momentarily appear before disappearing (and VM/docker sections are empty). Also, just to confirm, do I need to have the Unraid API running on both the homeassistant VM and Unraid? Quote Link to comment
ElectricBrainUK Posted May 31, 2021 Author Share Posted May 31, 2021 On 5/30/2021 at 9:35 AM, paulmorabi said: I've suddenly started noticing these errors: Get VM Details for ip: 192.168.1.66 Failed Request failed with status code 503 There's nothing else I can see in the logs. When I access the WebUI, I can log in and the details for the VM momentarily appear before disappearing (and VM/docker sections are empty). Also, just to confirm, do I need to have the Unraid API running on both the homeassistant VM and Unraid? Hey, That is odd, 503 suggests it cannot authenticate or is being blocked, try re entering your server details in the ui as sometimes they expire especially if you have the config location set to secure. If you have changed the network config to have its own ip on br0.1 etc then it will not work and will throw this error though this may not be the case. You do not need the unraid api on both, the unraid one works more reliably so I would suggest using only that. Quote Link to comment
paulmorabi Posted May 31, 2021 Share Posted May 31, 2021 15 minutes ago, ElectricBrainUK said: Hey, That is odd, 503 suggests it cannot authenticate or is being blocked, try re entering your server details in the ui as sometimes they expire especially if you have the config location set to secure. If you have changed the network config to have its own ip on br0.1 etc then it will not work and will throw this error though this may not be the case. You do not need the unraid api on both, the unraid one works more reliably so I would suggest using only that. Thanks for replying. Yes, something is very odd and this is after months of there being no issues. The only thing that changed is I moved my Home Assistant to a different VM and restored from backup. Even then, it seemed to work afterwards but die later. I've tried with one container, alternatively on the HA VM and the Unraid box and each gives the same result, albeit, slighttly different behavior: * On the Unraid box, after logging in, it does not show a second pop up window to log in again. It loads the details of the VM but only very partiually, no containers, vm's or anything. * On the HA VM, the container asks me to login again after the first auth and then does similar to above, only displaying a few details. Then the logs begin filling with 503 errors. Quote Link to comment
ElectricBrainUK Posted May 31, 2021 Author Share Posted May 31, 2021 2 minutes ago, paulmorabi said: Thanks for replying. Yes, something is very odd and this is after months of there being no issues. The only thing that changed is I moved my Home Assistant to a different VM and restored from backup. Even then, it seemed to work afterwards but die later. I've tried with one container, alternatively on the HA VM and the Unraid box and each gives the same result, albeit, slighttly different behavior: * On the Unraid box, after logging in, it does not show a second pop up window to log in again. It loads the details of the VM but only very partiually, no containers, vm's or anything. * On the HA VM, the container asks me to login again after the first auth and then does similar to above, only displaying a few details. Then the logs begin filling with 503 errors. Okay, I have heard a couple of users report a similar issue, I would suggest not using the HA VM one as that is in alpha and not consistently working at the best of times. For the unraid one, have you tried deleting the server altogether (in the menu on the left under manual config) and then restarting the docker and reconfiguring? This may help otherwise try deleting the config folder and starting from scratch. You could also check the server logs on unraid itself to see if there is any extra details on why it is failing to connect there. Quote Link to comment
paulmorabi Posted May 31, 2021 Share Posted May 31, 2021 2 hours ago, ElectricBrainUK said: Okay, I have heard a couple of users report a similar issue, I would suggest not using the HA VM one as that is in alpha and not consistently working at the best of times. For the unraid one, have you tried deleting the server altogether (in the menu on the left under manual config) and then restarting the docker and reconfiguring? This may help otherwise try deleting the config folder and starting from scratch. You could also check the server logs on unraid itself to see if there is any extra details on why it is failing to connect there. Have removed the add-on from HA completely. I also removed config and container and started again with same results. There is nothing really in the error logs: READY Server listening on http://0.0.0.0:80 Failed to retrieve config file, creating new. ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) Error: ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at updateMQTT (/app/mqtt/index.js:272:30) at Timeout._onTimeout (/app/mqtt/index.js:304:5) at listOnTimeout (node:internal/timers:556:17) at processTimers (node:internal/timers:499:7) { errno: -2, syscall: 'open', code: 'ENOENT', path: 'config/mqttKeys' } The secure keys for mqtt may have not been generated, you need to make 1 authenticated request via the API first for this to work ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) Get Docker Details for ip: 192.168.1.66 Failed Request failed with status code 503 Get Main Details for ip: 192.168.1.66 Failed Request failed with status code 503 Quote Link to comment
1471 Posted June 1, 2021 Share Posted June 1, 2021 (edited) On 5/18/2021 at 11:18 AM, ElectricBrainUK said: Hey, it should prompt you for a username and password if you set the keystorage variable to secure, however you will also have to authenticate rest requests. Otherwise you could put the UI behind some other reverse proxy or something that adds auth Thanks for the awesome container, really useful for Unraid metrics in Grafana. I'm having problems securing the container using the method suggested though, any ideas what i'm doing wrong? I've changing the container variable 'KeyStorage' from config to secure but can still access the api without a username/password prompt, with the following in the logs: Error: ENOENT: no such file or directory, open 'secure/mqttKeys' Edited June 1, 2021 by 1471 Quote Link to comment
ElectricBrainUK Posted June 2, 2021 Author Share Posted June 2, 2021 On 5/31/2021 at 3:12 PM, paulmorabi said: Have removed the add-on from HA completely. I also removed config and container and started again with same results. There is nothing really in the error logs: READY Server listening on http://0.0.0.0:80 Failed to retrieve config file, creating new. ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) Error: ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at updateMQTT (/app/mqtt/index.js:272:30) at Timeout._onTimeout (/app/mqtt/index.js:304:5) at listOnTimeout (node:internal/timers:556:17) at processTimers (node:internal/timers:499:7) { errno: -2, syscall: 'open', code: 'ENOENT', path: 'config/mqttKeys' } The secure keys for mqtt may have not been generated, you need to make 1 authenticated request via the API first for this to work ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) ERROR ENOENT: no such file or directory, open 'config/mqttKeys' at Object.openSync (node:fs:492:3) at Proxy.readFileSync (node:fs:393:35) at default (api/getServers.js:27:36) at call (node_modules/connect/index.js:239:7) at next (node_modules/connect/index.js:183:5) at next (node_modules/connect/index.js:161:14) at next (node_modules/connect/index.js:161:14) at SendStream.error (node_modules/serve-static/index.js:121:7) at SendStream.emit (node:events:378:20) at SendStream.EventEmitter.emit (node:domain:470:12) Get Docker Details for ip: 192.168.1.66 Failed Request failed with status code 503 Get Main Details for ip: 192.168.1.66 Failed Request failed with status code 503 Those are the logs from unraid api however I mean the ones from unraid itself - there may be something there which explains why the api is failing to connect, did you try reconfiguring the server in the api as well? Quote Link to comment
ElectricBrainUK Posted June 2, 2021 Author Share Posted June 2, 2021 (edited) 17 hours ago, 1471 said: Thanks for the awesome container, really useful for Unraid metrics in Grafana. I'm having problems securing the container using the method suggested though, any ideas what i'm doing wrong? I've changing the container variable 'KeyStorage' from config to secure but can still access the api without a username/password prompt, with the following in the logs: Error: ENOENT: no such file or directory, open 'secure/mqttKeys' Hey - that is unusual Im guessing the API is sending a cached response probably something I need to fix and not a problem with your config.. Ill look into it - it should mean that you cant perform actions without auth but the bug with the cache means the data about the server is still shared Edited June 2, 2021 by ElectricBrainUK Quote Link to comment
1471 Posted June 3, 2021 Share Posted June 3, 2021 (edited) On 6/2/2021 at 7:52 AM, ElectricBrainUK said: Hey - that is unusual Im guessing the API is sending a cached response probably something I need to fix and not a problem with your config.. Ill look into it - it should mean that you cant perform actions without auth but the bug with the cache means the data about the server is still shared Thanks for the info. Yup, setting the variable to 'secure' does then prompt for a password if trying to perform an action which is good. I just need to try and figure out how to authenticate to access the api in Grafana now. Edited June 3, 2021 by 1471 Quote Link to comment
ElectricBrainUK Posted June 5, 2021 Author Share Posted June 5, 2021 I'm not as familiar with grafana but the auth is set by setting the authorization header to the base64 of username:password Quote Link to comment
Maggi0r Posted June 6, 2021 Share Posted June 6, 2021 Hello, Ichjj is faced with a problem again and can't find a solution. I have installed the Unraid API on my main Unraid server. At the beginning I still had the functions that I could control the array etc. there, also the start of the VMs and Docker, but now nothing works anymore. Information is also no longer displayed. I hope you can help me along with that. Greetings Maggi Quote Link to comment
Soulflyzz Posted June 9, 2021 Share Posted June 9, 2021 On 6/6/2021 at 4:34 AM, Maggi0r said: Hello, Ichjj is faced with a problem again and can't find a solution. I have installed the Unraid API on my main Unraid server. At the beginning I still had the functions that I could control the array etc. there, also the start of the VMs and Docker, but now nothing works anymore. Information is also no longer displayed. I hope you can help me along with that. Greetings Maggi Same thing happened to me today been working grate for days now and went to turn on my vm with HA and greyed out. Go into the Docker image and can see Details but nothing else populates. Only thing that has changed is I added a PiHole Docker image today. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.