Jump to content

itimpi

Moderators
 View Profile  See their activity

  • Posts

    20,789

  • Joined

  • Last visited

  • Days Won

    57

 Content Type 

Everything posted by itimpi

  1. itimpi
    Not sure it explains you issue but you do seem to have at least one docker container continually crashing and restarting and it is flooding your syslog making it hard to spot anything useful. You should be able to identify the culprit(s) by looking at the uptime on the Docker tab.
  2. itimpi
    Sounds like your setup is triggering the behaviour described in the Caution in this section of the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page.
  3. itimpi
    If done from terminal what was the exact command you used. Very easy to get it wrong which is why we always recommend doing it via the GUI.
  4. itimpi
    I suspect it could have just been a block that was borderline on reading and rewriting it has resolved the issue. I would not worry unless it starts occurring again.
  5. itimpi
    Yes, but you may have to configure relevant paths to match any changes you make,
  6. itimpi
    Yes.
  7. itimpi
    You can always reinstall docker containers using their previous settings via Apps->Previous Apps.
  8. itimpi
    You can have multiple pools and configure what each pool is going to be used for by configuring User Shares (for caching), Docker and VM Manager appropriately.
  9. itimpi
    The diagnostics are a single zip file. You seem to have posted separately all the files from inside that zip. Please repost the single zip.
  10. itimpi
    If you want more control then use the Parity Check Tuning plugin to handle pauses and resumes. You can tell that plugin whether Manual checks should be paused or not.
  11. itimpi
    You click on the pool on the Main tab and there is an option there to change the profile. After changing the profile a Balance is performed to convert all the data and metadata to the selected profile.
  12. itimpi
    It does not transfer your licence - but when you boot Unraid it will notice that is the wrong licence file for the USB stick, and will take you through the automated licence transfer (which then blacklists the old usb stick). You can do the automated transfer once a year - if for any reason you need a second one then you need to email support and they will do a manual transfer for you so it takes a little longer (hours rather than minutes).
  13. itimpi
    If you are 6.12.8 AND you are mirroring to flash then it will be automatically included.
  14. itimpi
    The only possibility I can think of other than the disk itself failing might be some obscure power related issue. Do not think, however, that could cause the rapidly increasing reallocated sectors value.
  15. itimpi
    Yes - that means start a scheduled parity check every minute of every day! Not sure how it got like that.
  16. itimpi
    Cache could well help as long as the transfer in question is going there instead of via the array. However even then transfers could be slowed down by the need to check the array for existence of files when you first try to open them. As I said wait until there is nothing else going on and then do any tests so that you have removed as many variables as possible,
  17. itimpi
    OK - could not spot anything obvious. Only thing I note is that you are on not on the latest Unraid release and in some 6.12.x releases there was a bug around having too many include disks - not sure if this affects you. Might try updating to the latest 6.12.8 release to see if it helps. If you do this make sure you first take a backup of your current flash drive so that if 6.12.8 causes you any problems you can easily revert.
  18. itimpi
    I see there is already a k2d docker container. Not sure what would be involved in settings up a k3d variant.
  19. itimpi
    This will DRAMTICALLY slow down any transfers to/from the array. With that going on I am surprised you even get the speeds you mentioned. No point in doing any speed tests while there is an array level operation going on.
  20. itimpi
    I would think 100MB is a lot to add to the standard Unraid release. From what you say it should be easy to either load it manually via putting the package into the ‘extras’ folder on the flash drive or a relatively trivial plugin to download and install it
  21. itimpi
    I would think these are actually happening for FCP to flag them. They may well, however, be ones you can ignore especially if they just occur during the boot/startup sequence. Perhaps posting your diagnostics.zip file might allow for informed feedback on this.
  22. itimpi
    As far as I know this has always been the behaviour. Whether it can be made more 'intelligent' when you elect to keep assignments I have no idea.
  23. itimpi
    That looks like an error reading the flash drive. You could try out this to see if it helps. While doing so see if you can copy the 'config' folder off the flash drive as that contains all of your settings and licence.
  24. itimpi
    Should not be, although you when you add it you will need to wait for Unraid to Clear it (to avoid it affecting parity) before you will be able to format it and start using it to store files.
  25. itimpi
    It might help if you gave the name of the share you are trying to use so we can check its settings?
×
×
  • Create New...