Jump to content

JorgeB

Moderators
 View Profile  See their activity

  • Posts

    67,572

  • Joined

  • Last visited

  • Days Won

    707

 Content Type 

Everything posted by JorgeB

  1. JorgeB
    That's a GUI problem, cache device is always there, try rebooting in safe mode.
  2. JorgeB
    You don't repair CRC errors, they don't reset, are they still increasing?
  3. JorgeB
    You need to do a new config, Tools -> New Config
  4. JorgeB
  5. JorgeB
    No, most likely some hardware issues, digas might help.
  6. JorgeB
    Please post the diagnostics: Tools -> Diagnostics
  7. JorgeB
    NVMe device dropped offline, this can sometimes help: Some NVMe devices have issues with power states on Linux, try this, on the main GUI page click on flash, scroll down to "Syslinux Configuration", make sure it's set to "menu view" (on the top right) and add this to your default boot option, after "append" and before "initrd=/bzroot" nvme_core.default_ps_max_latency_us=0 Reboot and see if it makes a difference, if it doesn't look for a BIOS update and/or try a different brand/model device.
  8. JorgeB
    CRC errors don't reset, but if you're getting more it's likely a cable problem, or those disks don't like that controller, you can swap them with the other model you have an test.
  9. JorgeB
    Both diags are just after rebooting, you need to grab ones after the problem and before rebooting.
  10. JorgeB
    Yes.
  11. JorgeB
    Various call traces, including macvlan, those are usually the result of having dockers with a custom IP address:
  12. JorgeB
    Some SMR drives report trim support, and so the plugin expects trim to work, possible solution would be to only trim non rotational devices.
  13. JorgeB
    Yes, I would like this, and the starting point ideally could be given as a percentage or sector.
  14. JorgeB
    Any unclean shutdown since last check? If not run another one.
  15. JorgeB
    Swap both cabes/slot with a different disk and see if problem follows the disk.
  16. JorgeB
    You should post in the existing support thread:
  17. JorgeB
    Jan 2 15:01:59 JJ-NAS kernel: nvme nvme0: controller is down; will reset: CSTS=0x3, PCI_STATUS=0x10 Jan 2 15:02:30 JJ-NAS kernel: nvme nvme0: Device not ready; aborting reset Jan 2 15:02:30 JJ-NAS kernel: nvme nvme0: Removing after probe failure status: -19 It's unlikely to be related to power states, as that's usually mentioned in the log when related, it appears to be dropping abruptly, but can't say if it's a device or board issue.
  18. JorgeB

    freeze system

    JorgeB commented on foXaCe's report in Prereleases

    Start by running memtest.
  19. JorgeB
    GUI is not great for monitoring pools, see here for more info.
  20. JorgeB
    Log re-starts after a reboot, it it keeps crashing you can try this, it might catch something.
  21. JorgeB

    freeze system

    JorgeB commented on foXaCe's report in Prereleases

    Checksum errors are usually the result of a hardware problem, like bad RAM.
  22. JorgeB
    Probably a general support issue, and unfortunately diags after rebooting are not much help, if it happens again try to get them before doing it, if the GUI option doesn't work type "diagnostics" in the console.
  23. JorgeB
    Don't really known much about Sabrent, 980 Pro is probably one of the best NVMe devices around, but likely won't notice much performance different, still worth trying the 980 if those continue to drop.
  24. JorgeB

    Backups

    JorgeB replied to ashman70's topic in VM Engine (KVM)

    I snapshot them them send/receive to another pool, that's one option, if you're using btrfs.
  25. JorgeB
    It works with Unraid as expected, not as much bandwidth as the JMB585 but sufficient for 4 HDDs, time will tell is it's reliable but I would expect to be similar to the 2 port Asmedia, which is fine.
×
×
  • Create New...