November 11, 20223 yr 23 minutes ago, TexasUnraid said: Thanks! Didn't even cross my mind. Sure enough that did it, now to go reset all my settings for my dockers that use cookies lol While I was trying to figure this out I noticed that there is the option for both VNC and SPICE in the VM? What is the difference? Is one better then the other? The SPICE(Prototype) Client is not as good as the VNC client, but it works ok. But enable spice allows external spice clients also like virt-viewer. Edited November 11, 20223 yr by SimonF
November 11, 20223 yr Cool, thanks for the info, yeah I will just stick with VNC, it works for what I need. Only real complaint is that copy/paste does not work with the built in clipboard.
November 12, 20223 yr On 11/11/2022 at 7:43 AM, Stixbnr32 said: Upgraded to 6.11.3 and it went well but now I lost all of the Shares. A reboot fixed it but this worries me. I also lost my shares after the update, reboot sorted it.
November 12, 20223 yr disks.ini seems to have changed after 6.9X which causes the dynamic s3_sleep plugin to not be able to detect array disks. Not sure if this plugin is actively updated. Fix is here:
November 12, 20223 yr Captains log : Stardate -300135.9916286149 Updated from 6.11.2 to 6.11.3 with No issues.
November 12, 20223 yr 12 minutes ago, WizP said: Have also lost my shares and cannot reach the Unraid server via smb... It's the UD plugin. Will have a fix shortly.
November 12, 20223 yr Upgraded, and 2nd parity drive shows up as disabled. Diagnostics attached below. storage-diagnostics-20221112-1143.zip
November 12, 20223 yr no hard evidence to support it but updated from 6.11.2 to 6.11.3 yesterday and all went well. Doing some large file transfers today and the SMB transfer speed seems to be on a go slow, anyone else noticed anything? Edited November 12, 20223 yr by markiii
November 12, 20223 yr 16 minutes ago, markiii said: no hard evidence to support it but updated from 6.11.2 to 6.11.3 yesterday and all went well. Doing some large file transfers today and the SMB transfer speed seems to be on a go slow, anyone else noticed anything? SMB connections really depend on the OS on both ends. You’ll probably need to give more details.
November 12, 20223 yr 2 hours ago, WizP said: Have also lost my shares and cannot reach the Unraid server via smb... Update the UD plugin.
November 12, 20223 yr 3 minutes ago, wgstarks said: SMB connections really depend on the OS on both ends. You’ll probably need to give more details. windows 10 on the other end no issues pre upgrade
November 12, 20223 yr 3 minutes ago, markiii said: windows 10 on the other end I never use windows so can’t help with that but there may be a couple of windows user here. 😁
November 12, 20223 yr 38 minutes ago, markiii said: no hard evidence to support it but updated from 6.11.2 to 6.11.3 yesterday and all went well. Doing some large file transfers today and the SMB transfer speed seems to be on a go slow, anyone else noticed anything? 15 minutes ago, markiii said: windows 10 on the other end no issues pre upgrade Please start a new thread in the General Support forum as these types of issues usually lead to multiple posts which are impossible to follow in Release thread. Be sure to attach Diagnostic file.
November 13, 20223 yr 8 hours ago, markiii said: no hard evidence to support it but updated from 6.11.2 to 6.11.3 yesterday and all went well. Doing some large file transfers today and the SMB transfer speed seems to be on a go slow, anyone else noticed anything? can't even use SMB with the latest update...
November 13, 20223 yr 1 minute ago, takkkkkkk said: can't even use SMB with the latest update... Post diagnostics and what does can't use SMB mean?
November 13, 20223 yr 16 minutes ago, dlandon said: Post diagnostics and what does can't use SMB mean? On 10/4/2022 at 7:55 PM, limetech said: Add this to "Settings/SMB/SMB Extras/Samba extra configuration" ntlm auth = Yes Please report back if this solves connectivity issues. this fixed the issue, should have looked at the support page first
November 13, 20223 yr 17 hours ago, Kir said: Upgraded, and 2nd parity drive shows up as disabled. It was already disabled at boot, i.e., it got disabled before the update, but since SMART looks fine you can just re-enable the disk and re-sync parity, might also be a good idea to replace/swap cables before to rule them out if it happens again to the same disk. https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself
November 13, 20223 yr 17 hours ago, markiii said: no hard evidence to support it but updated from 6.11.2 to 6.11.3 yesterday and all went well. Doing some large file transfers today and the SMB transfer speed seems to be on a go slow, For me SMB with v6.11.3 is performing about the same as v6.11.0, there is a small though measurable slowdown, especially with large files, my guess is that they are caused by the Samba update from v4.7.0 to v4.7.2 which includes some CVEs: samba: version 4.17.2 (CVE-2021-20251 CVE-2022-3437 CVE-2022-3592) But note that this update was done on v6.11.2, so v6.11.3 should be very similar to v6.11.2 P.S. tests are done from one Unraid server to another, both with the same release, I tried before doing Windows to Unraid tests but they were not repeatable after some time, i.e., a test done 6 months later could produce very different results, likely because of the Windows updates installed in the meantime. P.P.S. only did tests with mitigations=off for now, though AFAIK no new mitigations in the kernel since v6.11.0.
November 13, 20223 yr 8 hours ago, takkkkkkk said: this fixed the issue, should have looked at the support page first got a link to the support page? damned if I can find it
November 13, 20223 yr Upgrade from 6.10.3 to 6.11.3 was successful without issues. I dont use VMs but have several macvlan dockers, fwiw.
November 13, 20223 yr 11 hours ago, JorgeB said: It was already disabled at boot, i.e., it got disabled before the update, but since SMART looks fine you can just re-enable the disk and re-sync parity, might also be a good idea to replace/swap cables before to rule them out if it happens again to the same disk. https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself Well... not really. It got disabled when I updated to 6.11.2, I just rebuilt it, and after 6.11.3 upgrade it got disabled again. I don't really see any indication why. Do you?
November 14, 20223 yr 11 hours ago, Kir said: I don't really see any indication why. Do you? Like mentioned the disk was already disabled at boot, i.e., it was already disabled or it got disabled during the shutdown before, but without diags showing what happened cannot really say wy, other than almost certain it wasn't the update, if it happens again see if you can grab the diags before rebooting.
November 14, 20223 yr Just tried to upgrade from 6.11.1 to 6.11.3 and now it won't boot. It is stuck on this: vfio-pci 0000:12:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem vfio-pci 0000:12:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none I cannot get the support file because I cannot get into the guy. Does anyone know how can I fix this or how can I go back to 6.11.1? Any help is greatly appreciated. UPDATE: after a while, the GUI came up and all of my Docker Containers and VM are working. Should I be worried on this VFIO-PCI on my screen? Usually, it has the server IP address. Edited November 14, 20223 yr by Tucubanito07
November 15, 20223 yr I am currently running 6.10.3 with no problems. What would I gain/risk by going to 6.11.3? I am about to install a 22TB WD Gold drive to replace my 18TB parity drive.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.