Furby8704 Posted April 12, 2017 Share Posted April 12, 2017 got 503 again. will try to rebuild my database and see if that solves it again Quote Link to comment
dtempleton Posted April 12, 2017 Share Posted April 12, 2017 Regarding TMM: I thought it might be a Java version issue, since the TMM home page says that it requires "at least 1.7." TMM won't run on my Mac (10.10) since that is 1.61 (IIRC). I looked into the TMM volume, though, and the Java version is 1.8, I think it's a subversion 121. I also tried deleting my TMM config directory, and it just made a new one and still didn't work. I can't parse the error that 'TMM has tried 5 times to download...' with a brand new config directory. Maybe it's just hyperbole, like when I tell my kids "I've told you a million times..." I know Kodi and Plex will scrape (actually for TV I just let Sick Beard do its thing), but for movies the matching algorithm and metadata that comes from TMM is the best for me, and the setup is pretty simple; I do it about fortnightly and it's a time to make sure all the files are clean and usable. Dennis Quote Link to comment
FreeMan Posted April 13, 2017 Share Posted April 13, 2017 I use Libresonic mostly so my kids can access content from where they are scattered around the world, so I'm not sure of the exact start date for this issue, but I'd imagine it was the release that auto-installed on/about 9 April. One of the sprogs notified me this afternoon that she was unable to access the server & I discovered I wasn't either from within my home network. I just checked the log and it's full of this: Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Error: Unable to access jarfile libresonic.war Starting Libresonic.. Error: Unable to access jarfile libresonic.war That's the only thing that's in the log. I'd imagine that it goes back to the container restart that I did about 4 hours ago. Any suggestions? Quote Link to comment
hurricanehrndz Posted April 13, 2017 Author Share Posted April 13, 2017 I will test the container some time this weekendSent from my ONEPLUS A3000 using Tapatalk 2 Quote Link to comment
FreeMan Posted April 19, 2017 Share Posted April 19, 2017 On 4/13/2017 at 6:59 PM, hurricanehrndz said: I will test the container some time this weekend Sent from my ONEPLUS A3000 using Tapatalk I know it was Easter weekend, but did you get a chance to take a look at this yet? I tried uninstalling & reinstalling, just in case, but I'm getting the same result. Quote Link to comment
hurricanehrndz Posted April 24, 2017 Author Share Posted April 24, 2017 Not yet, sorry. Life keeps me busySent from my ONEPLUS A3000 using Tapatalk Quote Link to comment
morficus Posted September 30, 2017 Share Posted September 30, 2017 Hello! Regarding TMM... I'm running in to the same "tried to download five times" issue. I have tried completely deleting the config file as well as deleting the image and doing a clean install (yes, with a fresh config), but the result is always the same. Attached is the launcher.log file. Hope it helps resolve the issue. launcher.log Quote Link to comment
StanC Posted October 9, 2017 Share Posted October 9, 2017 (edited) Hello hurricanehrndz, I think there is something amiss with the Sonos portion of the Subsonic docker. When I go to setup Sonos using HOST network it finds my Sonos controllers but tries to enable it for Subsonic URL http://172.17.0.1:4040/ws/Sonos, which I believe is the internal docker image IP address. If I use BRIDGE network, then it cannot find the Sonos controllers and nothing works. Is there a config file that can be manually edited to change this? I would like to use this docker, but if a change cannot be made I will have to use Subsonic on a different machine. Update 10/17/2017: Hooray! I got Subsonic working on Sonos even after reading on other forums that it was broken after Sonos updated the firmware to version 8. Anyway here are the steps that I did to get this working. I installed the Subsonic docker with Network Type set to Host. Following the section "Using a remote Subsonic server" at http://www.subsonic.org/pages/sonos.jsp, I clear all entries for the previous Subsonic installation by enter 242 into the SID field and leaving Service Name blank then click Submit. This will clear out the previous entry. Do not know if this was needed but I did it anyway just to be sure. I rebooted all of my Sonos devices by unplugging the power cords waited a minute and then plugged the power cords back in. Then waited until they were online - checked with pinging them. I then enabled Sonos service in Subsonic, do not worry that the logs show that it failed to enable the service. I believe this is because of the firmware 8 update. Next I went back to the section "Using a remote Subsonic server" at http://www.subsonic.org/pages/sonos.jsp setting the SID to 242 and Service Name to Subsonic and the rest as stated in the steps. Logged into the Sono Controller app on my PC, from the Manage menu I click Service Settings. Here I clicked the Add button and scrolled down the list and saw that Subsonic was listed and selected it. I selected it and then clicked "I already have an account" and then enter the Login and Password that I created in Subsonic for the Sonos service then clicked Next. The service was enabled and now Subsonic was listed as a Music Source on the home screen of the Sonos Controller app. I then tested the service by select Subsonic from the home screen and clicked on one of my albums and it started playing. - I am very pleased that I go this working and hope that the steps I outlined here will help others. Edited October 17, 2017 by StanC Worked out the steps to make the Subsonic docker to work with Sonos Quote Link to comment
Glimmerman911 Posted November 3, 2017 Share Posted November 3, 2017 Any resolution with TinyMediaManager and the download error? I am getting the same thing, clean install first try. Quote Link to comment
hurricanehrndz Posted November 3, 2017 Author Share Posted November 3, 2017 Sorry, I haven't had much time to take a look at this. There are some forks our there.Sent from my ONEPLUS A3000 using Tapatalk Quote Link to comment
rutherford Posted January 29, 2018 Share Posted January 29, 2018 I would like to request a small re-write for the subsonic setup page. In the directions, you refer to both HTTPS_PORT and SSL_PORT. I believe these are equivalent - so when talking about each of them, you should stick with the same words. This leads people to create a new VAR called SSL_PORT, which I don't think is what you intend. I wrote an additional post that has this info, and some other custom domain setup stuff here Some of the defaults in the Setup page won't work, like the /subsonic is mapped to a cache drive, but not everyone has a cache drive. It's part of the required setup. I would add all four of these entries in the default setup, leaving the values blank: /subsonic, /music, /podcasts, and /playlists I'm not sure if this is possible, but on the setup page, I'd really put some sort of horizontal line across from Title and the Value. For instance, "Host Port 1:" is set to 4040, with a subtext of "n/a." It's almost a little tough to tell where the value goes for Host Port 1, as there's a bunch of white-space, and even a little offset between the left and right side of the page. Here is what I'd put in that Setup page: Quote Required setup:/subsonic : set this path to where you wish Subsonic to store it's configuration./music : set this path to where you wish Subsonic to search for music./podcasts : set this path to where you wish Subsonic to store and share podcasts from./playlists : set this path to where you wish Subsonic to store and share playlists from. Optional setup - Enable HTTPS: Enabling HTTPS will disable HTTP access including any ports you had assigned over there. You must open new ports for this service. 1. Set Key 2 - HTTPS_PORT to desired port 2. Set Host Port 2: to the same port as HTTPS_PORT Other environmental variable MAX_MEM : this is the numeric value for the maximum Java heap size. Thank you very much @hurricanehrndz Quote Link to comment
halorrr Posted February 8, 2018 Share Posted February 8, 2018 So credit to henkall here for figuring out what was wrong with TMM He submitted the issue and I submitted a pull request with the change, hopefully we will see this merged in soon https://github.com/hurricanehrndz/tmm/issues/3 Is not hopefully there is someone with the know how to make an updated docker file. Quote Link to comment
BBriner Posted March 13, 2018 Share Posted March 13, 2018 Just a question. Is TMM still available? I have been trying to find it in the Community Applications without any luck. Only when searching at DockerHub I can find something. Quote Link to comment
dockerPolice Posted March 13, 2018 Share Posted March 13, 2018 In consultation with @hurricanehrndz, his repository was removed from CA. Quote Link to comment
jademonkee Posted November 15, 2018 Share Posted November 15, 2018 On 3/13/2018 at 9:26 PM, dockerPolice said: In consultation with @hurricanehrndz, his repository was removed from CA. Does that mean all his Dockers? So we won't bet receiving any more updates to Subsonic? Quote Link to comment
dockerPolice Posted November 15, 2018 Share Posted November 15, 2018 If an update shows up on dockerHub for the container, then the installed app will show an update available. Whether or not that happens, I can't answer 1 Quote Link to comment
Furby8704 Posted December 1, 2018 Share Posted December 1, 2018 can Subsonic docker be updated to Subsonic 6.1.4?? Quote Link to comment
Squid Posted December 1, 2018 Share Posted December 1, 2018 I wouldn't expect it since subsonic is closed source. Switch to libresonic Quote Link to comment
jademonkee Posted February 25, 2019 Share Posted February 25, 2019 (edited) Does anyone know how to clear the logs for Subsonic? My log is 422MB. Seems unnecessarily verbose (lots of "chown: changing ownership of '/music/[FILENAME]': Read-only file system" entries). I know it's now recommended to switch over to libresonic or madsonic, but Subsonic is still working nicely for me, so I just thought I'd ask if anyone knows how (I can't find anywhere in the Subsonic UI, nor Unraid's). Many thanks. EDIT: I should note that I mean the Docker log for Subsonic is 422MB as shown in the 'Container Size' Docker page in Unraid. The log referenced in Subsonic (/subsonic/subsonic.log) is only 83KB. Edited February 25, 2019 by jademonkee Extra info and clarification Quote Link to comment
Squid Posted February 25, 2019 Share Posted February 25, 2019 1 hour ago, jademonkee said: Does anyone know how to clear the logs for Subsonic? My log is 422MB. Seems unnecessarily verbose (lots of "chown: changing ownership of '/music/[FILENAME]': Read-only file system" entries). I know it's now recommended to switch over to libresonic or madsonic, but Subsonic is still working nicely for me, so I just thought I'd ask if anyone knows how (I can't find anywhere in the Subsonic UI, nor Unraid's). Many thanks. EDIT: I should note that I mean the Docker log for Subsonic is 422MB as shown in the 'Container Size' Docker page in Unraid. The log referenced in Subsonic (/subsonic/subsonic.log) is only 83KB. https://forums.unraid.net/topic/57181-real-docker-faq/#comment-564326 1 Quote Link to comment
downer06 Posted August 8, 2020 Share Posted August 8, 2020 My SabNZDB install stopped working this week. I see this is no longer updated. Does anyone know how to update the python version in this container or make a backup of all my settings so i can import it into another version of sabnzdb . I can do the docker settings easily enough but i buld alot of integration into this and would like to copy it. I will take me weeks to remember and get all the little things working agian. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.