rix Posted March 1, 2016 Share Posted March 1, 2016 Hi, I was unsure whether you prefered issues being posted here or directly on github: As noted in https://github.com/aptalca/docker-webserver/issues/4 I fail to enable PHP on the nginx-letsencrypt Docker. Everything else (nginx, letsencrypt and fail2ban) works fine Thanks for any advice how to enable this feature... Quote Link to comment
peter_sm Posted March 1, 2016 Share Posted March 1, 2016 In using Nginx-letsencrypt I'm kind of new yo create domains, i do have a ddns name for my home router at http://www.dnsexit.com/, this one I have xxxxx.publicvm.com How shall I put in this to the docker config to use with letsencrypt? see image attached log from the docker Requesting root privileges to run letsencrypt... ~/.local/share/letsencrypt/bin/letsencrypt --no-self-upgrade certonly --standalone --standalone-supported-challenges tls-sni-01 --email [email protected] --agree-tos -d publicvm.com -d xxxxxxx.publicvm.com -d xxxxxxx.publicvm.com IMPORTANT NOTES: - If you lose your account credentials, you can recover through e-mails sent to [email protected]. - The following errors were reported by the server: Domain: publicvm.com Type: unauthorized Detail: Correct zName not found for TLS SNI challenge. Found 'www.dnsexit.com, dnsexit.com' To fix these errors, please make sure that your domain name was entered correctly and the DNS A record(s) for that domain contain(s) the right IP address. - Your account credentials have been saved in your Let's Encrypt configuration directory at /etc/letsencrypt. You should make a secure backup of this folder now. This configuration directory will also contain certificates and private keys obtained by Let's Encrypt so making regular backups of this folder is ideal. * Restarting authentication failure monitor fail2ban ...fail! Mar 1 17:14:47 32949e45f63a syslog-ng[6271]: syslog-ng starting up; version='3.5.3' Mar 1 17:17:01 32949e45f63a /USR/SBIN/CRON[6287]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) //Peter Quote Link to comment
aptalca Posted March 1, 2016 Author Share Posted March 1, 2016 Hi, I was unsure whether you prefered issues being posted here or directly on github: As noted in https://github.com/aptalca/docker-webserver/issues/4 I fail to enable PHP on the nginx-letsencrypt Docker. Everything else (nginx, letsencrypt and fail2ban) works fine Thanks for any advice how to enable this feature... Looking into it. I thought I had tested php before, but when I just tested now, it didn't work for me either. I'll fix it in the next few days. Quote Link to comment
aptalca Posted March 1, 2016 Author Share Posted March 1, 2016 In using Nginx-letsencrypt I'm kind of new yo create domains, i do have a ddns name for my home router at http://www.dnsexit.com/, this one I have xxxxx.publicvm.com How shall I put in this to the docker config to use with letsencrypt? see image attached log from the docker Requesting root privileges to run letsencrypt... ~/.local/share/letsencrypt/bin/letsencrypt --no-self-upgrade certonly --standalone --standalone-supported-challenges tls-sni-01 --email [email protected] --agree-tos -d publicvm.com -d xxxxxxx.publicvm.com -d xxxxxxx.publicvm.com IMPORTANT NOTES: - If you lose your account credentials, you can recover through e-mails sent to [email protected]. - The following errors were reported by the server: Domain: publicvm.com Type: unauthorized Detail: Correct zName not found for TLS SNI challenge. Found 'www.dnsexit.com, dnsexit.com' To fix these errors, please make sure that your domain name was entered correctly and the DNS A record(s) for that domain contain(s) the right IP address. - Your account credentials have been saved in your Let's Encrypt configuration directory at /etc/letsencrypt. You should make a secure backup of this folder now. This configuration directory will also contain certificates and private keys obtained by Let's Encrypt so making regular backups of this folder is ideal. * Restarting authentication failure monitor fail2ban ...fail! Mar 1 17:14:47 32949e45f63a syslog-ng[6271]: syslog-ng starting up; version='3.5.3' Mar 1 17:17:01 32949e45f63a /USR/SBIN/CRON[6287]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) //Peter letsencrypt expects you to have full control over whatever url you put in. In the case of dynamic dns, you do not have control over the actual domain: publicvm.com In that case put in xxxxxx.publicvm.com as the URL and leave the subdomains as is (default is www). With that, letsencrypt will create a certificate that covers xxxxxx.publicvm.com and www.xxxxxx.publicvm.com, both of which you have control over. Quote Link to comment
jang430 Posted March 5, 2016 Share Posted March 5, 2016 Hi all, do you know if I can access this via Microsoft RDP? Or Turbo VNC? Neither works for me. I'm using port 7070 and 7071. I tried both, says connection established, but will eventually say connection lost. Quote Link to comment
tola5 Posted March 6, 2016 Share Posted March 6, 2016 Hi are there other there have problem with Jdownloader it just crash my.jdownloader.org dont work when I restart it it show grean ball but it dont get to login just white website If I move the jdownloader to run on my VM where are my link in the docker ? now it work can it be network load ? Quote Link to comment
rix Posted March 7, 2016 Share Posted March 7, 2016 Hi, I was unsure whether you prefered issues being posted here or directly on github: As noted in https://github.com/aptalca/docker-webserver/issues/4 I fail to enable PHP on the nginx-letsencrypt Docker. Everything else (nginx, letsencrypt and fail2ban) works fine Thanks for any advice how to enable this feature... Looking into it. I thought I had tested php before, but when I just tested now, it didn't work for me either. I'll fix it in the next few days. thank you really looking forward to use muximux behind a secure (=fail2ban enabled) proxy Quote Link to comment
ezpz Posted March 9, 2016 Share Posted March 9, 2016 Any love on zoneminder 1.29 yet? Very keen to give it a go Quote Link to comment
aptalca Posted March 9, 2016 Author Share Posted March 9, 2016 Any love on zoneminder 1.29 yet? Very keen to give it a go Still working on it Quote Link to comment
jbear Posted March 9, 2016 Share Posted March 9, 2016 Thank you, looking forward to this one as well ... Any love on zoneminder 1.29 yet? Very keen to give it a go Still working on it Quote Link to comment
icedragonslair Posted March 9, 2016 Share Posted March 9, 2016 Looking for dolphin support, it will let me copy but not move files Quote Link to comment
aptalca Posted March 9, 2016 Author Share Posted March 9, 2016 Looking for dolphin support, it will let me copy but not move files I just tested it again and it lets me cut and paste as well as move by dragging in split screen. Are you getting an error? Do you have write permission in the folders or on the file? Are you running it as nobody or root? Quote Link to comment
icedragonslair Posted March 10, 2016 Share Posted March 10, 2016 Running it as it set up in unraid, i am assuming since I didn't have a place to put in a login or Pass during install probably just as a nobody. I am attempting to move multiple folders via the smb shares, there is an error it states 'could not rename file smb://server_a/movies/.....' assuming this is a permissions thing. I have all permissions through windows smb and I know that is different but how do I assign permissions for dolphin? I can copy and paste but then I have to remember what to delete. I also cannot find how to change the res on it to 1920x1080 vs 1280x720? Quote Link to comment
aptalca Posted March 10, 2016 Author Share Posted March 10, 2016 Running it as it set up in unraid, i am assuming since I didn't have a place to put in a login or Pass during install probably just as a nobody. I am attempting to move multiple folders via the smb shares, there is an error it states 'could not rename file smb://server_a/movies/.....' assuming this is a permissions thing. I have all permissions through windows smb and I know that is different but how do I assign permissions for dolphin? I can copy and paste but then I have to remember what to delete. I also cannot find how to change the res on it to 1920x1080 vs 1280x720? Probably a permissions issue with smb I actually mount the whole unraid drive in dolphin as /mnt:/mnt so I can move things natively and not through smb open the advanced view in container settings and you'll see the resolution variables as well as the uid and guid if you want to run it with root permissions Quote Link to comment
icedragonslair Posted March 10, 2016 Share Posted March 10, 2016 Outstanding, went straight through root/mnt/user and have almost instant moves.... Quote Link to comment
aptalca Posted March 11, 2016 Author Share Posted March 11, 2016 For all zoneminder fans, version 1.29 is out. But it's a separate container. Due to the extensive changes in the new version, it was near impossible to update a 1.28 version in place. So you'll have to install this separate container and set it up from scratch. Don't try to install it using the same config folder with existing data, it won't work. To be honest, I wasn't even able to update my existing install to 1.29 no matter how hard I tried (without deleting the existing data), so there was no way I could do it for all the existing users with different configs. Let me know if the new one has any issues Quote Link to comment
ezpz Posted March 13, 2016 Share Posted March 13, 2016 For all zoneminder fans, version 1.29 is out Awesome thanks! Would it be possible to have the option of zmtrigger.pl (/usr/bin/zmtrigger.pl) always running? Quote Link to comment
ezpz Posted March 13, 2016 Share Posted March 13, 2016 Also one other thing zoneminder appears to be looking for cambozola at /usr/share/zoneminder/www/cambozola.jar but the docker has it stored at /usr/share/zoneminder/cambozola.jar Quote Link to comment
aptalca Posted March 13, 2016 Author Share Posted March 13, 2016 Also one other thing zoneminder appears to be looking for cambozola at /usr/share/zoneminder/www/cambozola.jar but the docker has it stored at /usr/share/zoneminder/cambozola.jar Thanks for the heads up. Fixed in the new update. Quote Link to comment
aptalca Posted March 13, 2016 Author Share Posted March 13, 2016 For all zoneminder fans, version 1.29 is out Awesome thanks! Would it be possible to have the option of zmtrigger.pl (/usr/bin/zmtrigger.pl) always running? Could you elaborate on this? What's the current behavior and what is the desired? Thanks Quote Link to comment
ezpz Posted March 13, 2016 Share Posted March 13, 2016 Could you elaborate on this? What's the current behavior and what is the desired? The script is used to externally trigger an event on zoneminder (e.g. security alarm going off). The script needs to be always running for this to occur. The default behaviour is that it's not running. As a temporary fix I've just added it to the zoneminder init.d script which seems to do the job. Cheers. Quote Link to comment
aptalca Posted March 14, 2016 Author Share Posted March 14, 2016 Could you elaborate on this? What's the current behavior and what is the desired? The script is used to externally trigger an event on zoneminder (e.g. security alarm going off). The script needs to be always running for this to occur. The default behaviour is that it's not running. As a temporary fix I've just added it to the zoneminder init.d script which seems to do the job. Cheers. Zoneminder wiki says that the script is called when you turn on opt_triggers in the settings. Does that not work for you? https://wiki.zoneminder.com/How_to_use_your_external_camera's_motion_detection_with_ZM Thanks Quote Link to comment
ezpz Posted March 14, 2016 Share Posted March 14, 2016 Zoneminder wiki says that the script is called when you turn on opt_triggers in the settings. Does that not work for you? https://wiki.zoneminder.com/How_to_use_your_external_camera's_motion_detection_with_ZM Thanks It does now I turned that setting off and then back on and restarted the docker and seems to be holding strong now. Thanks! Quote Link to comment
clowrym Posted March 16, 2016 Share Posted March 16, 2016 I'm having an issue setting up Zoneminder, Seems to fail everytime it starts & I end up with a partial Child container on my docker page root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="Zoneminder" --net="host" --privileged="true" -e TZ="America/Denver" -e HOST_OS="unRAID" -p 8181:80/ -v "/mnt/cache/Apps/zoneminder/":"/config":rw aptalca/docker-zoneminder docker: Invalid proto: . See '/usr/bin/docker run --help'. The command failed. Quote Link to comment
aptalca Posted March 16, 2016 Author Share Posted March 16, 2016 I'm having an issue setting up Zoneminder, Seems to fail everytime it starts & I end up with a partial Child container on my docker page root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="Zoneminder" --net="host" --privileged="true" -e TZ="America/Denver" -e HOST_OS="unRAID" -p 8181:80/ -v "/mnt/cache/Apps/zoneminder/":"/config":rw aptalca/docker-zoneminder docker: Invalid proto: . See '/usr/bin/docker run --help'. The command failed. Hmm. That's strange because someone else is having the same exact issue with the letsencrypt container. It seems like an unraid issue. Which unraid version are you on? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.