You were correct Squid!

Logs have clearly shown that sda1 had some issues, should have looked into those before opening this but it coincided with update so I assumed this was related to update and not any other failure.

Stopped the array and rebooted the server and all my Apps are working as before. Thank you!

It seems that flash drives are Achilles heel of Unraid  - this is second drive in use after first one failed a month ago... Need to research this more and look for more quality/resilient flash drive.

Thanks for your help!

 

17 minutes ago, veelckoo said:

Need to research this more and look for more quality/resilient flash drive

It is worth remembering that USB2 drives seem to be more resilient (as well as being cheaper)

Hello,

I am having two small issues related to Docker and the CA.

1. When I go to the CA tab, it takes longer than usually to load and occasionally tells me i'm connected to the backup server (not every time thought).
   Also, some applications' icons are not loading (like OpenVPN AS), and once everything is loaded I cannot click on the unraid tabs anymore (dashboard, main, shares, etc.). I have to reload the unraid GUI to be able to click them again.
2. Also, and this may very well be related to the first issue, in the dashboard tab of the Unraid GUI, one of my Docker containers icon has stopped being displayed. I read in an old topic that I should delete my browser's cache, and check the image file on the usb flash drive in config/plugins/dockerman/images. The thing is : the image is present and it opens just fine on my laptop with any application.

The primary server is hosted on the cloud that is currently having issues (GitHub), along with every plugin for unRaid, and a ton of the images for any containers.  Everything is slower because CA always tries the primary first to operate from.  Docker / Dashboard pages should not however be affected from the outage unless you've installed a new container during this outage.  If you have, then what you're seeing is "normal" as the system is attempting to download the icon for that new container and it takes it a bit to fail.

5 minutes ago, CiaoCiao said:

check the image file on the usb flash drive in config/plugins/dockerman/images.

Oh yeah, the images are no longer stored on the flashdrive  (6.8.something +)  They are now stored within the docker.img file

14 minutes ago, Squid said:

The primary server is hosted on the cloud that is currently having issues (GitHub)

Typical!  They have to have issues at the same time as I power down, recable and power back up again.  I can stop scratching my head now and randomly rebooting things.

4 minutes ago, Squid said:

Oh yeah, the images are no longer stored on the flashdrive  (6.8.something +)  They are now stored within the docker.img file

For some reason everything is working fine again 🤨

Because the outage is over

I updated to 6.8.3 and then updated the community application (2020.04.19). Following this, I wanted to update the applications, but I get the error message for all installed apps that have an update.

Configuration not found. Was this container created using this plugin?

I have searched the forums, and I see some topics from a few years ago, is this still the fix? Is there a document to follow or a way to copy all settings and reapply them after?

Your flash drive is either corrupt or dropped offline.  Try a different port and reboot

I'm still not having any joy. Everything is working, but cannot be updated.

Create a new thread in General Support and post your diagnostics

Is there any way to let CA run through a proxy?

I tried to add 

http_proxy=http://xxx:xxx https_proxy=http://xxx:xxx /usr/local/sbin/emhttp &

to the GO file,but it didn't work for me...

It can be used in docker and terminal，but not for CA

On 4/24/2020 at 2:41 AM, limonchoms said:

Is there any way to let CA run through a proxy?

I tried to add 

http_proxy=http://xxx:xxx https_proxy=http://xxx:xxx /usr/local/sbin/emhttp &

to the GO file,but it didn't work for me...

It can be used in docker and terminal，but not for CA

To get CA to work with a proxy, place the attached file into /config/plugins/community.applications on the flash drive.  Edit to suit

 

If it doesn't work PM me and we'll work out a testing routine

 

proxy.cfg

40 minutes ago, Squid said:

Place the attached file into /config/plugins/community.applications on the flash drive.  Edit to suit

 

If it doesn't work PM me and we'll work out a testing routine

 

proxy.cfg 48 B · 0 downloads

It looks like running through the proxy😄Solved my problem，thx

Sorry if this is the wrong place,

I am setting up Traktarr. I have successfully connected to Sonarr and Radarr. I am trying setup to run automatically. Instructions say edit a file in /opt. It aint there! Help?

Just now, ap90033 said:

Sorry if this is the wrong place,

I am setting up Traktarr. I have successfully connected to Sonarr and Radarr. I am trying setup to run automatically. Instructions say edit a file in /opt. It aint there! Help?

You need to ask in it's support thread

1 hour ago, ap90033 said:

Sorry if this is the wrong place,

It is, as is the new thread you started in General Support. But I replied to that thread with advice on how to find the correct thread.

This may be a dumb question, but how can I add new apps to Community Applications? Is it possible for users to contribute by adding new apps or does the dev do all that? For example, there is a Docker container that I wanted to install on my unraid, but it wasn't listed in the community applications, so I had to add it to unraid manually. I'd like to add this to the community applications if I can.

 

Hello, This is a niiiiice plugin I've ever had. But I have a big problem as some others when access the home page get a timeout err.

I try to download the CA proxy.cfg, but it shows not longer exist, can you please upload again? Thanks a log :)

32 minutes ago, kevinJohn said:

Hello, This is a niiiiice plugin I've ever had. But I have a big problem as some others when access the home page get a timeout err.

I try to download the CA proxy.cfg, but it shows not longer exist, can you please upload again? Thanks a log

proxy.cfg

 

Edit to suit and place into /config/plugins/community.applications on the flash drive.

 

But, if you're NOT using a proxy, then the problem is far more likely to be a failure to resolve the addresses.  Enter in 208.67.222.,222 and 208.67.220.220 into Settings - Network Settings as static DNS addresses

Is CA working right now?

 

Getting this:

 

Download of appfeed failed.

Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again.

Alternatively, there is also a chance that the server handling the application feed is temporarily down.
Last JSON error Recorded: Syntax error

11 hours ago, tknx said:

Is CA working right now?

 

Getting this:

 

Download of appfeed failed.

Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again.

Alternatively, there is also a chance that the server handling the application feed is temporarily down.
Last JSON error Recorded: Syntax error

Thanks for your help!

I have already change my DNS to 208.67.222.222 and 208.67.220.220 and 223.5.5.5, still got the same fail

I tried ping OpenDNS server addr and get 140ms delay, I think this is why I could not reach APP STORE stably.

Maybe I will give proxy.cfg another go to see if it works to me.

Thanks again anyway

is shortipy malware? the github project link redirects to a suspicious website. Community Applications app could use an "Abuse" or "Report" feature @Squid