binhex Posted March 12, 2016 Share Posted March 12, 2016 Hi jonp, firstly congrats on getting this out, awesome job! Do you know if the tweak to put iptable_mangle support back in got included in this release? Hi bin, Sorry for not replying to the PMs on the subject. I had forwarded internally for review. I believe this was taken care of with 6.2, but if you could confirm for the, that'd be great. No probs I knew you guys were flat out working on 6.2. I don't have a test rig at the mo so unfortunately I won't be able to test until 6.2 goes final but I will let you know asap. I'm assuming 6.1.9 is going to be the last 6.1.x release right? If not it would be really cool if you could include mangle support in the last release of 6.1 series Link to comment
Furby8704 Posted March 12, 2016 Share Posted March 12, 2016 nfs isnt working for me. system share wasnt created for me when running i had to manually set the location and got docker running fine but im still unable to get the vm tab to enable its enabled but status says stopped EDIT: libvirt wasnt working with unassign drive just had to move it back to cache vm is working now Link to comment
itimpi Posted March 12, 2016 Share Posted March 12, 2016 Just did an update via the plugin, and when the system rebooted the bzroot-gui file was not present on the USB drive, so I could not boot into GUI mode. The GUI said I was on the 6.2beta18 release so the other files had been successfully updated, so not sure what went wrong as there was no error message indicated. Corrected it by copying it across from the ZIP download version of the release. P.S. Really like having the GUI mode available. Being able to use the attached monitor to also run a VM is a boon as my system does not support hardware pass-through so can not drive a GPU directly from a VM. This means the unRAID box can now act as a lightweight desktop wereas before it was effectively only useful as a headless box. Link to comment
jphipps Posted March 12, 2016 Share Posted March 12, 2016 NFS appears to be failing. Log entries: Mar 11 23:49:08 Tower rpc.statd[8155]: Version 1.3.3 starting Mar 11 23:49:08 Tower sm-notify[8156]: Version 1.3.3 starting Mar 11 23:49:08 Tower sm-notify[8156]: Already notifying clients; Exiting! Mar 11 23:49:08 Tower rpc.statd[8155]: failed to create RPC listeners, exiting Mar 11 23:49:08 Tower root: Starting NFS server daemons: Mar 11 23:49:08 Tower root: /usr/sbin/exportfs -r Mar 11 23:49:08 Tower root: /usr/sbin/rpc.nfsd 8 Mar 11 23:49:08 Tower root: rpc.nfsd: address family AF_INET6 not supported by protocol TCP Mar 11 23:49:08 Tower root: rpc.nfsd: unable to set any sockets for nfsd Mar 11 23:49:08 Tower root: /usr/sbin/rpc.mountd Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for udp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for tcp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for udp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for tcp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for udp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for tcp6 Mar 11 23:49:08 Tower rpc.mountd[8166]: mountd: No V2 or V3 listeners created! I had the same issue, NFS wouldn't start. Folllowed this article and commented out 2 lines in the /etc/netconfig and got nfs started as a temp work around https://www.novell.com/support/kb/doc.php?id=7011354 Link to comment
Helmonder Posted March 12, 2016 Share Posted March 12, 2016 Took the plunge.. Updated the system disabling all VM and Dockers on forehand. System did not autostart. I enabled my second parity disk (has been precleared and waiting for this very moment). Started the array I had no VM tab In VM settings VM's were still enabled I disabled it and enabled it again, this made the tab appear (guessing this is due to the Dynamix webgui). I did the pre-startup actions for the VM's (edit, change video to QXL). I have 3 VM's, neither started. All primary disks were no longer allocated, I set to manual, browsed to the primary disk and save/updated. This made it work again. One of my VM's had two disks attached, this one also did not start but when setting to manual the primary disk was found again by itself, did not have to browse to it. Now on to the dockers.. Link to comment
jphipps Posted March 12, 2016 Share Posted March 12, 2016 NFS appears to be failing. Log entries: Mar 11 23:49:08 Tower rpc.statd[8155]: Version 1.3.3 starting Mar 11 23:49:08 Tower sm-notify[8156]: Version 1.3.3 starting Mar 11 23:49:08 Tower sm-notify[8156]: Already notifying clients; Exiting! Mar 11 23:49:08 Tower rpc.statd[8155]: failed to create RPC listeners, exiting Mar 11 23:49:08 Tower root: Starting NFS server daemons: Mar 11 23:49:08 Tower root: /usr/sbin/exportfs -r Mar 11 23:49:08 Tower root: /usr/sbin/rpc.nfsd 8 Mar 11 23:49:08 Tower root: rpc.nfsd: address family AF_INET6 not supported by protocol TCP Mar 11 23:49:08 Tower root: rpc.nfsd: unable to set any sockets for nfsd Mar 11 23:49:08 Tower root: /usr/sbin/rpc.mountd Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for udp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for tcp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for udp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for tcp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for udp6 Mar 11 23:49:08 Tower root: rpc.mountd: svc_tli_create: could not open connection for tcp6 Mar 11 23:49:08 Tower rpc.mountd[8166]: mountd: No V2 or V3 listeners created! I had the same issue, NFS wouldn't start. Folllowed this article and commented out 2 lines in the /etc/netconfig and got nfs started as a temp work around https://www.novell.com/support/kb/doc.php?id=7011354 Scratch that, I thought the daemon had started, but rpc.statd wont restart... Link to comment
mauler57 Posted March 12, 2016 Share Posted March 12, 2016 Mine has been hanging when accessing the second disk which is a share on the array where the games are. It then causes the gui to hang so far a reboot is the only way for gui to come back Link to comment
Helmonder Posted March 12, 2016 Share Posted March 12, 2016 Took the plunge.. Updated the system disabling all VM and Dockers on forehand. System did not autostart. I enabled my second parity disk (has been precleared and waiting for this very moment). Started the array I had no VM tab In VM settings VM's were still enabled I disabled it and enabled it again, this made the tab appear (guessing this is due to the Dynamix webgui). I did the pre-startup actions for the VM's (edit, change video to QXL). I have 3 VM's, neither started. All primary disks were no longer allocated, I set to manual, browsed to the primary disk and save/updated. This made it work again. One of my VM's had two disks attached, this one also did not start but when setting to manual the primary disk was found again by itself, did not have to browse to it. Now on to the dockers.. All dockers appear to need an update.. Kind of weird.. needo/Couchpotato, upgrade/start: worked (took a long time to start again) needo/Deluge, upgrade/start: worked aptalca/dolphin, upgrade/start: worked needo/sabnzbd, upgrade/start: worked needo/sickrage, upgrade/start: worked (took a long time to start again) gfjardim/transmission, upgrade/start: worked gfjardim/crashplan, upgrade/start: worked Link to comment
jphipps Posted March 12, 2016 Share Posted March 12, 2016 Also noticed the plugin upgrade doesn't seem to put the gui boot image on the USB drive. Link to comment
peter_sm Posted March 12, 2016 Share Posted March 12, 2016 I was also needed to upgrade all my dockers. Link to comment
sparklyballs Posted March 12, 2016 Share Posted March 12, 2016 I don't like the way the add config button for dockers is hidden in advanced view, and the button name itself is too vague. the add config screen itself is also rather confusing. i foresee the next hot topic in docker support is "how do i add another volume" etc , especially for things like plex with differing media types that people will want to add. Link to comment
peter_sm Posted March 12, 2016 Share Posted March 12, 2016 I don't like the way the add config button for dockers is hidden in advanced view, and the button name itself is too vague. the add config screen itself is also rather confusing. i foresee the next hot topic in docker support is "how do i add another volume" etc , especially for things like plex with differing media types that people will want to add. +1 Link to comment
mostlydave Posted March 12, 2016 Share Posted March 12, 2016 I was also missing the gui boot image after the plugin upgrade Dockers also needed updated, and they took forever. The new gui boot is great, it's awesome being able to make changes at my desk with a full size keyboard and mouse instead of squinting at a laptop! Link to comment
mauler57 Posted March 12, 2016 Share Posted March 12, 2016 I was also missing the gui boot image after the plugin upgrade Dockers also needed updated, and they took forever. The new gui boot is great, it's awesome being able to make changes at my desk with a full size keyboard and mouse instead of squinting at a laptop! how did you fix the gui boot image missing? Link to comment
CHBMB Posted March 12, 2016 Share Posted March 12, 2016 I was also missing the gui boot image after the plugin upgrade Dockers also needed updated, and they took forever. The new gui boot is great, it's awesome being able to make changes at my desk with a full size keyboard and mouse instead of squinting at a laptop! how did you fix the gui boot image missing? Download V6.2 Beta 18 manually and copy across bzroot-gui manually I'd guess.. Link to comment
dlandon Posted March 12, 2016 Share Posted March 12, 2016 I was also missing the gui boot image after the plugin upgrade Dockers also needed updated, and they took forever. The new gui boot is great, it's awesome being able to make changes at my desk with a full size keyboard and mouse instead of squinting at a laptop! how did you fix the gui boot image missing? Download V6.2 Beta 18 manually and copy across bzroot-gui manually I'd guess.. Yes. Link to comment
itimpi Posted March 12, 2016 Share Posted March 12, 2016 I have a Windows VM with two vdisks allocated (one for system and one for data). They are in .vdi format although I suspect that is not relevant. If I simply try and use the VM without doing anything then it works fine. When I follow the documented update procedure and use the Edit option on the VM then one of the vdisk entries gets removed. As it is the first one (the system disk) then the VM is effectively useless after this! Link to comment
Helmonder Posted March 12, 2016 Share Posted March 12, 2016 This is what I experienced also... Did not try it without the edits though... Link to comment
Bur0k Posted March 12, 2016 Share Posted March 12, 2016 Linus mentioned that NVMe Support is now in 6.2 Can somebody confirm this? Link to comment
jonp Posted March 12, 2016 Share Posted March 12, 2016 Linus mentioned that NVMe Support is now in 6.2 Can somebody confirm this? Read the op Link to comment
itimpi Posted March 12, 2016 Share Posted March 12, 2016 This is what I experienced also... Did not try it without the edits though... After doing the Edit (and manually adding in the Disk that was removed) I then start getting the message Warning: libvirt_domain_xml_xpath(): namespace warning : xmlns: URI unraid is not absolute in /usr/local/emhttp/plugins/dynamix.vm.manager/classes/libvirt.php on line 936 Warning: libvirt_domain_xml_xpath(): and the list of VM's is only correct up to the one I have just edited and then starts going wrong with the one just edited. Not sure if it is relevant but I have the images hosted on a SSD that is external to the array. Not sure how to get around this other than reverting to 6.1.9 and repeating the update to 6.2. Anybody any ideas? Link to comment
Helmonder Posted March 12, 2016 Share Posted March 12, 2016 I do not notice any errors... All is running fine,, Link to comment
EGOvoruhk Posted March 12, 2016 Share Posted March 12, 2016 Important: Your server will require internet access upon boot in order to validate with the LimeTech key server. Is this a one-time validation OR is this new version crippled unless it phones home at EVERY reboot???? HOPEFULLY this only will apply to the beta and evaluation versions. If I can't start my server because my internet happens to be down... > Has there been any word on this? I prevent outside network access on my unRAID box at the firewall (and won't be changing it). I thought our keys were tied to the USB, what's to authenticate? Link to comment
asshopo Posted March 12, 2016 Share Posted March 12, 2016 Important: Your server will require internet access upon boot in order to validate with the LimeTech key server. Is this a one-time validation OR is this new version crippled unless it phones home at EVERY reboot???? HOPEFULLY this only will apply to the beta and evaluation versions. If I can't start my server because my internet happens to be down... > Has there been any word on this? I prevent outside network access on my unRAID box at the firewall. I thought our keys were tied to the USB, what's to authenticate? Either there is a keygen out there or they are trying to prevent a keygen from being made considering they are gaining speed with new customers. However, if this isn't implemented properly and unraid wont start (starting the array/services I assume), then that is a huge dealbreaker. I will use OMV or a combination of something else. Unraid is nice, pretty and makes things easy, but I won't let a bad thunderstorm that causes my UPS to shut my servers down that might also screw my internet up at the same time (it happens.. more than once) hold my data hostage. edit: I work for a fairly well known company that has millions of installations of our flagship software. We also implemented a key server. But the software is a bit relaxed if it has already authenticated before. If it has, then it gives an additional period of time of purchased features before it get's mad that it can't contact home. This would be an acceptable solution. Also, what happens if their key server goes down? Ours has, both by our mistake and our hosting having issues. I hope they thought this through. Link to comment
peter_sm Posted March 12, 2016 Share Posted March 12, 2016 Anyone else that has empty user shares? GUI show none. only disk shares shows up under disk share tab. I have just started up my array with the second parity disk. Link to comment
Recommended Posts