jbrodriguez Posted February 21, 2017 Author Share Posted February 21, 2017 2 hours ago, byographic said: Hi, I've a question regarding the set up of the application, basically when I put the address in the IP/host section i always get an error "please enter a valid ip address/hostname". I use a dynamic dns so it's a third level domain thank you Hi @byographic, Since you mention dynamic dns, it seems you're trying to connect remotely. The app can connect remotely only if you have OpenVPN (or similar) set up in your router/firewall or unraid server. As mentioned a couple of posts above, if you want to install OpenVPN on unraid, you can check this video Let me know if you're referring to a different scenario. Quote Link to comment
interwebtech Posted February 22, 2017 Share Posted February 22, 2017 9 hours ago, byographic said: Hi, I've a question regarding the set up of the application, basically when I put the address in the IP/host section i always get an error "please enter a valid ip address/hostname". I use a dynamic dns so it's a third level domain thank you Pretty sure it is asking for your server's NAT IP on your local wi-fi network. Quote Link to comment
byographic Posted February 22, 2017 Share Posted February 22, 2017 16 hours ago, jbrodriguez said: Hi @byographic, Since you mention dynamic dns, it seems you're trying to connect remotely. The app can connect remotely only if you have OpenVPN (or similar) set up in your router/firewall or unraid server. As mentioned a couple of posts above, if you want to install OpenVPN on unraid, you can check this video Let me know if you're referring to a different scenario. yes i was trying to connect remotely. i will set up OpenVPN it was already in my plans but i didn't had the chance yet thank you Quote Link to comment
jbrodriguez Posted February 23, 2017 Author Share Posted February 23, 2017 v2.4.1 is now available on Play Store and App Store ! This release fixes the app name in iOS devices. Also in this release: - Replace swipe component - Replace button component - General improvements and bug fixes Quote Link to comment
JorgeB Posted February 23, 2017 Share Posted February 23, 2017 On 10/02/2017 at 7:18 PM, jbrodriguez said: @johnnie.black, would you let me know if the visual issue persists ? v2.4.1 fixed my display issue. Quote Link to comment
wgstarks Posted February 24, 2017 Share Posted February 24, 2017 I notice that the new version has much more empty space between display selections (Disks, Ops, etc). Was this necessary to fix some issue or could it be reverted back to the previous view? Was nice not to have to do a bunch of swiping. Quote Link to comment
remati Posted February 24, 2017 Share Posted February 24, 2017 After checking the "Yes I want to do this" I can't seem to stop the array on 2.4.1 IOS Quote Link to comment
jbrodriguez Posted February 24, 2017 Author Share Posted February 24, 2017 11 hours ago, johnnie.black said: v2.4.1 fixed my display issue. Awesome ! I was hoping that would be the case ! Quote Link to comment
jbrodriguez Posted February 24, 2017 Author Share Posted February 24, 2017 8 hours ago, wgstarks said: I notice that the new version has much more empty space between display selections (Disks, Ops, etc). Mmm, there's a lot more space. I'll look into it. Quote Link to comment
jbrodriguez Posted February 24, 2017 Author Share Posted February 24, 2017 3 hours ago, remati said: After checking the "Yes I want to do this" I can't seem to stop the array on 2.4.1 IOS What unRAID version are you running ? I tried on a 6.3.0 and it's working fine. Quote Link to comment
perhansen Posted February 24, 2017 Share Posted February 24, 2017 When having more than one server in the app, and one is offline, the app will try refreshing that offline one constantly. Can you make a timeout, if the app havent reached the server within a periode og time, maybe 5sec and mark that server as offline? Running iOS, 6.3.2 and 2.4.1 Sent from my iPhone using Tapatalk Quote Link to comment
jbrodriguez Posted February 24, 2017 Author Share Posted February 24, 2017 v2.4.2 is available as an over-the-air release (won't appear in the App Store nor Play store) Changes: On 6.3.x servers, the app will now inkove power down on the server without stopping the array first. This is because the power down procedure in that version, tries to stop the array first. Additionally, when refreshing servers, the app checks if a server is down first, to avoid unnecessary waits. Also in this release: - General improvements and bug fixes I'm still looking into the white spaces reported by wgstarks. @perhansen, this should fix the issue you mentioned. Note: with over-the-air releases, you should see a red badge on the settings icon, just click on settings and follow the instructions (restart the app) Quote Link to comment
perhansen Posted February 24, 2017 Share Posted February 24, 2017 v2.4.2 is available as an over-the-air release (won't appear in the App Store nor Play store) Changes: On 6.3.x servers, the app will now inkove power down on the server without stopping the array first. This is because the power down procedure in that version, tries to stop the array first. Additionally, when refreshing servers, the app checks if a server is down first, to avoid unnecessary waits. Also in this release: - General improvements and bug fixes I'm still looking into the white spaces reported by wgstarks. @perhansen, this should fix the issue you mentioned. Note: with over-the-air releases, you should see a red badge on the settings icon, just click on settings and follow the instructions (restart the app)Perfect. Thanks for the update. What do you mean, when you say that the app will now invoke powerdown on the server without stopping the array first?Will the power down then stop the array and do a clean shutdown?ISent from my iPhone using Tapatalk Quote Link to comment
jbrodriguez Posted February 24, 2017 Author Share Posted February 24, 2017 4 minutes ago, perhansen said: What do you mean, when you say that the app will now invoke powerdown on the server without stopping the array first? Will the power down then stop the array and do a clean shutdown? Yes, as per this comment For 6.3.x, the app is basically calling /sbin/poweroff (as if you were invoking it from a terminal) Quote Link to comment
perhansen Posted February 24, 2017 Share Posted February 24, 2017 Yes, as per this comment For 6.3.x, the app is basically calling /sbin/poweroff (as if you were invoking it from a terminal) Thanks for the info. Sent from my iPhone using Tapatalk Quote Link to comment
remati Posted February 24, 2017 Share Posted February 24, 2017 8 hours ago, jbrodriguez said: What unRAID version are you running ? I tried on a 6.3.0 and it's working fine. Hey jbrodriguez, I'm on unraid version is 6.3.2 Just checked it again today to make sure and it still has the problem. After enabling the slider "Yes I want to do this" then array stop button is still disabled. Quote Link to comment
jbrodriguez Posted February 24, 2017 Author Share Posted February 24, 2017 5 minutes ago, remati said: Just checked it again today to make sure and it still has the problem. After enabling the slider "Yes I want to do this" then array stop button is still disabled. Oh ok ! I thought you meant that the array wasn't actually stopping. Sure, let me check what could be the issue there. Quote Link to comment
jbrodriguez Posted March 3, 2017 Author Share Posted March 3, 2017 v2.4.3 is available as an over-the-air release (won't appear in the App Store nor Play store) This release provides the following fixes - Stop operation not being enabled - Tabs with too much white space @remati this should fix your issue @wgstarks this should fix your issue Quote Link to comment
remati Posted March 4, 2017 Share Posted March 4, 2017 v2.4.3 is available as an over-the-air release (won't appear in the App Store nor Play store) This release provides the following fixes - Stop operation not being enabled - Tabs with too much white space [mention=69170]remati[/mention] this should fix your issue [mention=62472]wgstarks[/mention] this should fix your issueYes sir, fixed my issue. Great work!Sent from my iPad using Tapatalk Quote Link to comment
wgstarks Posted March 4, 2017 Share Posted March 4, 2017 22 hours ago, jbrodriguez said: v2.4.3 is available as an over-the-air release (won't appear in the App Store nor Play store) This release provides the following fixes - Stop operation not being enabled - Tabs with too much white space @remati this should fix your issue @wgstarks this should fix your issue Not sure it made much difference. Quote Link to comment
skylark Posted March 5, 2017 Share Posted March 5, 2017 My ControlR v2.4.0 doesnt find my servers any more. I'm running it on my mobile. How does OTA uodate work so i can upgrade the app itself? Sent from my LG-D855 using Tapatalk Quote Link to comment
jbrodriguez Posted March 5, 2017 Author Share Posted March 5, 2017 On 3/4/2017 at 2:24 AM, remati said: Yes sir, fixed my issue. Great work! Good to know, thanks ! Quote Link to comment
jbrodriguez Posted March 5, 2017 Author Share Posted March 5, 2017 20 hours ago, wgstarks said: Not sure it made much difference. Doesn't look good. Let me give it some more thought. Quote Link to comment
jbrodriguez Posted March 5, 2017 Author Share Posted March 5, 2017 13 minutes ago, skylark said: My ControlR v2.4.0 doesnt find my servers any more. I'm running it on my mobile. How does OTA uodate work so i can upgrade the app itself? Hi skylark, you should upgrade first to v2.4.1 which was a regular release (on the App/Play store). In any case, for ota releases, you should see a red badge on the settings icon, just click on settings and follow the instructions (restart the app) Quote Link to comment
wgstarks Posted March 5, 2017 Share Posted March 5, 2017 1 hour ago, jbrodriguez said: Doesn't look good. Let me give it some more thought. Thanks. This is purely a cosmetic issue, so if it doesn't get resolved it's really no big deal. If the blank spaces hadn't been smaller before I probably wouldn't have reported it at all. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.