Squid Posted May 13, 2019 Author Share Posted May 13, 2019 Update the plugin Sent via telekinesis Quote Link to comment
feyded1020 Posted August 12, 2019 Share Posted August 12, 2019 I am having an issue with my Backup's. I currently have my USB backing up every morning around 5am. As of late though I am getting the issue of the flash drive not remounting itself, and causing issues until I restart the server. Is this a problem with the way I have my server setup? I cant view any of my dockers, plugins, etc now because of it, and I presume its because the boot drive is unmounted and the server is only running off the OS in memory? My server typically has the dark theme on it, but any time this happens it changes back to default, and the bottom status bar will keep displaying 'Starting Services...' every couple seconds. I also want to state this happened before as well before parity check happened to be running too. I am running the latest version of unRAID(6.7.2), and latest version of CA Backup. Quote Link to comment
Squid Posted August 12, 2019 Author Share Posted August 12, 2019 The flash is never unmounted by unRaid, or any plugin for that matter. Try a different USB port, ideally USB2 Quote Link to comment
feyded1020 Posted August 12, 2019 Share Posted August 12, 2019 1 minute ago, Squid said: The flash is never unmounted by unRaid, or any plugin for that matter. Try a different USB port, ideally USB2 Will do. Thanks for the quick response, and all your awesome work. Quote Link to comment
feyded1020 Posted August 12, 2019 Share Posted August 12, 2019 (edited) I found out where it says it occurred, but no idea why the server would do that. Aug 12 02:21:46 Tower CA Backup/Restore: Backup / Restore Completed Aug 12 04:40:01 Tower kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000dc000-0x000dffff window] Aug 12 04:40:01 Tower kernel: caller _nv000939rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs Aug 12 05:59:19 Tower kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000dc000-0x000dffff window] Aug 12 05:59:19 Tower kernel: caller _nv000939rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs Aug 12 07:34:26 Tower kernel: usb 4-5: USB disconnect, device number 2 Now after parity completes I need to figure out what may be causing that. Edited August 12, 2019 by feyded1020 Quote Link to comment
trurl Posted August 14, 2019 Share Posted August 14, 2019 On 8/12/2019 at 1:36 PM, feyded1020 said: no idea why the server would do that. If by server you mean the Unraid OS, it wouldn't. If by server you mean the actual hardware, yes that is exactly what happened. The hardware disconnected. On 8/12/2019 at 12:36 PM, Squid said: Try a different USB port, ideally USB2 1 Quote Link to comment
feyded1020 Posted August 14, 2019 Share Posted August 14, 2019 1 hour ago, trurl said: If by server you mean the Unraid OS, it wouldn't. If by server you mean the actual hardware, yes that is exactly what happened. The hardware disconnected. My apologies, thats what I meant. I am not sure why my drive would do that. Its a Samsung thumb drive, about 2 years old. I have switched as directed to using the USB2 port on my machine. Thank you for the help. Quote Link to comment
comet424 Posted October 5, 2020 Share Posted October 5, 2020 i trying to setup ca backup on another unraid machine.. but its giving me issues i have a share called "Backup Of Files" i duplicated what is on my other server but i get 2 errors and not sure whats wrong.. it be nice if there was more detailed info... to me makes not sense no help no "?" to say how to fix it like example.. so not sure whats wrong better explaination be good Quote Link to comment
comet424 Posted October 5, 2020 Share Posted October 5, 2020 (edited) i figured the error... the error doesnt happen for Appdata just Flash and libvirt if the "Backup Of Files/Unraid/appdata" doesn't exist no error but will create "appdata" when it cabackup runs if the "Backup Of Files/Unraid/Flash" doesn't exist gives error.. so i have to manually make that "Flash" Folder if the "Backup Of Files/Unraid/libvirt" doesn't exists, gives error.. so i have to manually make that "libvirt" Folder maybe you can make it like Appdata... If usb destination folder doesnt exisit ... then create folder when cabackup is saved or ran same for libvirt just a suggestion... but made the folders manually and no errors given and maybe change that XML destination message to me that made no sense.. i couldnt find no XML destination or down by libvirt destination put in Brackets (XML Destination) Edited October 5, 2020 by comet424 Quote Link to comment
lovingHDTV Posted October 8, 2021 Share Posted October 8, 2021 I'd like to exclude the download sub-folders in my nzb and deluge docker directories. The file browser to select exclude directories doesn't allow me to select subfolders. Is it possible to add them manually some way? I don't need to backup the gigabytes of data in these subfolders. I just want the config data. Quote Link to comment
JonathanM Posted October 8, 2021 Share Posted October 8, 2021 24 minutes ago, lovingHDTV said: I'd like to exclude the download sub-folders in my nzb and deluge docker directories. The file browser to select exclude directories doesn't allow me to select subfolders. Is it possible to add them manually some way? I don't need to backup the gigabytes of data in these subfolders. I just want the config data. 1. Are you sure you are in the right thread? This is the support thread for a rather old version, it's been deprecated like the title says for years. 2. My nzb and deluge appdata total right at 100MB for both. Are you sure you don't have something misconfigured, or are keeping stuff you don't need there, like failed downloads or failed extractions? Quote Link to comment
lovingHDTV Posted October 8, 2021 Share Posted October 8, 2021 (edited) 9 minutes ago, JonathanM said: 1. Are you sure you are in the right thread? This is the support thread for a rather old version, it's been deprecated like the title says for years. 2. My nzb and deluge appdata total right at 100MB for both. Are you sure you don't have something misconfigured, or are keeping stuff you don't need there, like failed downloads or failed extractions? hmm, just clicked the support link in the plugin. Let me go check. Yep, upgrading to new plugin. thanks Edited October 8, 2021 by lovingHDTV Quote Link to comment
EArroyo Posted December 1, 2022 Share Posted December 1, 2022 I finally decided to fix/update some deprecated plugins and this one came up, is there a new repository or an update to the repo? Quote Link to comment
trurl Posted December 1, 2022 Share Posted December 1, 2022 1 hour ago, EArroyo said: I finally decided to fix/update some deprecated plugins and this one came up, is there a new repository or an update to the repo? Uninstall the deprecated plugins and search the Apps page for the new versions. Quote Link to comment
EArroyo Posted December 1, 2022 Share Posted December 1, 2022 16 hours ago, trurl said: Uninstall the deprecated plugins and search the Apps page for the new versions. Not related to what I asked previously... I noticed you have unSERVER and unBACKUP in your signature, is that just 2 unRAID servers and you named them like that to identify them? I am running 2 unRAID servers with Syncthing to do the sychronization with... Is that something similar to what you are doing or is there such a thing as an unBACKUP that synchronizes with your unRAID server? Quote Link to comment
trurl Posted December 1, 2022 Share Posted December 1, 2022 5 hours ago, EArroyo said: unSERVER and unBACKUP Those are just the server names, but it does sort of identify their purpose. I use rsync script to backup my media from unSERVER to unBACKUP occasionally. All important files have multi-generation backup to external disks stored offsite, using that same rsync script. I recommend everyone name their servers. Gets confusing and tiresome to look at yet another diagnostics zip named tower... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.