Jobine Posted February 1, 2019 Share Posted February 1, 2019 When I use the preset Apple 1080p60 Surround, the level is set at 4.2. I will try with this preset instead of mine... Quote Link to comment
Jobine Posted February 2, 2019 Share Posted February 2, 2019 I think I found the problem I try "Apple 1080p60 Surround, the level is set at 4.2" and the file works (with stereo audio) If I modify the audio transcoding for AAC 5.1, it does't work. I don't know what has changed in the new version of Handbrake. All my others files with AAC 5.1 works but not the new ones. Quote Link to comment
drdebian Posted February 4, 2019 Share Posted February 4, 2019 On a side note, I just figured out how to speed up h.265 encoding by a factor of 10: use Intel Quick Sync Video found in most current CPUs... it's a world of difference... add "modprobe i915" and "chmod -R 777 /dev/dri" to /boot/config/go at the end, then proceed to add the /dev/dri device to your handbrake docker container... lastly, chose the "H.265 (Intel QSV)" codec in the video section of handbrake... profit!! 😎 1 Quote Link to comment
Djoss Posted February 4, 2019 Author Share Posted February 4, 2019 2 hours ago, drdebian said: On a side note, I just figured out how to speed up h.265 encoding by a factor of 10: use Intel Quick Sync Video found in most current CPUs... it's a world of difference... add "modprobe i915" and "chmod -R 777 /dev/dri" to /boot/config/go at the end, then proceed to add the /dev/dri device to your handbrake docker container... lastly, chose the "H.265 (Intel QSV)" codec in the video section of handbrake... profit!! 😎 Yes, this is already documented https://github.com/jlesage/docker-handbrake#unraid-1 1 Quote Link to comment
bioneye Posted February 4, 2019 Share Posted February 4, 2019 Hello, thank you very much for this container. I have it encoding my TV shows and movies to H.265 and it works like a charm. I wondered: is it possible to tell HandBrake to ignore music files in the watch folder? Thank you very much in advance and best regards, bioneye Quote Link to comment
Jobine Posted February 7, 2019 Share Posted February 7, 2019 Still unresolved after Plex Media Server (1.15.0.659) and Plex iOS (5.10) updates All my newly converted files don't start on my iPad Mini 4. Quote Link to comment
Djoss Posted February 8, 2019 Author Share Posted February 8, 2019 On 2/4/2019 at 4:46 PM, bioneye said: Hello, thank you very much for this container. I have it encoding my TV shows and movies to H.265 and it works like a charm. I wondered: is it possible to tell HandBrake to ignore music files in the watch folder? Thank you very much in advance and best regards, bioneye The container expects only video files to be put in the watch folder. However, I guess that if HandBrake tries to convert music files, it would simple fail? Quote Link to comment
Djoss Posted February 8, 2019 Author Share Posted February 8, 2019 12 hours ago, Jobine said: Still unresolved after Plex Media Server (1.15.0.659) and Plex iOS (5.10) updates All my newly converted files don't start on my iPad Mini 4. I though it was working with stereo sound? 1 Quote Link to comment
Jobine Posted February 8, 2019 Share Posted February 8, 2019 Yes, but it worked before with 5.1 sound, I don't want stereo sound. Quote Link to comment
Djoss Posted February 13, 2019 Author Share Posted February 13, 2019 On 2/8/2019 at 8:02 AM, Jobine said: Yes, but it worked before with 5.1 sound, I don't want stereo sound. You could use MediaInfo (you can find it in Community Apps) and compare the same video encoded with the different HandBrake versions. Quote Link to comment
Djoss Posted February 13, 2019 Author Share Posted February 13, 2019 On 1/31/2019 at 11:22 AM, Hoopster said: Ran into the same problem. Card0 was owned by root:video. I chowned it to nobody:users (like the rest of /dev/dri) and the QSV encoding options appeared again. Thanks for the tip. BTW, with the latest version, you should no longer have to change permission of /dev/dri. 1 Quote Link to comment
FieldGenEJ Posted February 14, 2019 Share Posted February 14, 2019 Hey Djoss, Since we are able to pass through NVIDIA GPUs to dockers now (using the nvidia unraid plugin) would that allow for NVENC support for handbrake as stated here? https://handbrake.fr/docs/en/latest/technical/video-nvenc.html Quote Link to comment
Djoss Posted February 14, 2019 Author Share Posted February 14, 2019 31 minutes ago, FieldGenEJ said: Hey Djoss, Since we are able to pass through NVIDIA GPUs to dockers now (using the nvidia unraid plugin) would that allow for NVENC support for handbrake as stated here? https://handbrake.fr/docs/en/latest/technical/video-nvenc.html To my knowledge, NVENC support is only for Windows, not the Linux version Quote Link to comment
FieldGenEJ Posted February 14, 2019 Share Posted February 14, 2019 5 minutes ago, Djoss said: To my knowledge, NVENC support is only for Windows, not the Linux version Quote (Linux may work but via the command line interface only) Didn't even see that. 😥Maybe some day. Quote Link to comment
FieldGenEJ Posted February 14, 2019 Share Posted February 14, 2019 Just now, Jobine said: I saw that. I just enabled it for Plex. Unfortunately, as Djoss pointed out, Handbrake for linux doesn't support it. Hopefully it will in the future. Quote Link to comment
Jobine Posted February 14, 2019 Share Posted February 14, 2019 Sorry I erase it, I post my message too fast. Quote Link to comment
tazire Posted February 24, 2019 Share Posted February 24, 2019 really hope they get the linux nvidia support up and running. I have this set up as per spaceinvaders video but the slow trans-coding is keeping me from actually using this. got a p4000 in the waiting for this when it does get supported. just out of curriosity, does anyone know if this is something that is being worked on? Quote Link to comment
shaunvis Posted February 27, 2019 Share Posted February 27, 2019 I'm using a Dell server for Unraid. Am I correct that I could pop in an Nvidia video card, give it over to Handbrake and it will use that fr faster encoding? If so, could Plex also use the card for better transcoding? Quote Link to comment
Djoss Posted February 27, 2019 Author Share Posted February 27, 2019 16 hours ago, shaunvis said: I'm using a Dell server for Unraid. Am I correct that I could pop in an Nvidia video card, give it over to Handbrake and it will use that fr faster encoding? Currently, HandBrake only support Intel QSV for hardware-accelerated encoding. No support for Nvidia yet. Quote Link to comment
shaunvis Posted March 2, 2019 Share Posted March 2, 2019 I got Handbrake working fine. It's converting things I grab to h265 as it should. The file size difference between h264 has been pretty significant, sometimes half the size. Is there a way to get Handbrake to through my existing videos, recode them, delete the originals, and leave the new files in their place? I can go in and manually do it, but that's a LOT of work an dI'm looking for a way to automate it. Quote Link to comment
remotevisitor Posted March 2, 2019 Share Posted March 2, 2019 1 minute ago, shaunvis said: Is there a way to get Handbrake to through my existing videos, recode them, delete the originals, and leave the new files in their place? Have a look at the Unmanic docker .... Quote Link to comment
shaunvis Posted March 2, 2019 Share Posted March 2, 2019 1 hour ago, remotevisitor said: Have a look at the Unmanic docker .... Thanks! I hadn't found that one yet. I'll check it out Quote Link to comment
samladin86 Posted March 3, 2019 Share Posted March 3, 2019 When I go to try open the Webui for hand break I get the following This site can’t be reached 192.168.50.32 refused to connect. Search Google for 192 168 8080 ERR_CONNECTION_REFUSED Can someone please help my out please and thank you Quote Link to comment
CrunchyToast Posted March 5, 2019 Share Posted March 5, 2019 Hello, a couple quick questions here: Is it possible to ignore already existing files in the /watch directory? Is it possible to grab a file, have it converted then put back in the same location as the source file? I received an error of "already exists" when trying this. My goal would be to just convert new files and just leave the existing ones. Thanks. Quote Link to comment
Djoss Posted March 6, 2019 Author Share Posted March 6, 2019 On 3/3/2019 at 10:57 AM, samladin86 said: When I go to try open the Webui for hand break I get the following This site can’t be reached 192.168.50.32 refused to connect. Search Google for 192 168 8080 ERR_CONNECTION_REFUSED Can someone please help my out please and thank you Are you using default container settings? How do you access the web ui (via which port)? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.