clowrym Posted March 14, 2019 Author Share Posted March 14, 2019 can you post a screenshot of your docker template settings? Quote Link to comment
OneFiveRhema Posted March 15, 2019 Share Posted March 15, 2019 Here is my config: Quote Link to comment
clowrym Posted March 15, 2019 Author Share Posted March 15, 2019 2 hours ago, OneFiveRhema said: Here is my config: Is your PUID & PGID set to 0 for a reason? I dont know if it will make a difference, but usually I keep my dockers at PUID=99 AND PGID=100.... thats the only thing that looks a little off to me Quote Link to comment
OneFiveRhema Posted March 15, 2019 Share Posted March 15, 2019 1 hour ago, clowrym said: Is your PUID & PGID set to 0 for a reason? I dont know if it will make a difference, but usually I keep my dockers at PUID=99 AND PGID=100.... thats the only thing that looks a little off to me That's discouraging, I was hoping I was missing something obvious. I set them to that because I was logged in as root and I checked the ID and it was 0 for both. It was a desperate attempt to get it working. Quote Link to comment
OneFiveRhema Posted March 15, 2019 Share Posted March 15, 2019 I switched over to delugevpn and was able to get that working correctly. I appreciate the help. Quote Link to comment
mgranger Posted March 22, 2019 Share Posted March 22, 2019 On 3/15/2019 at 1:10 PM, OneFiveRhema said: I switched over to delugevpn and was able to get that working correctly. I appreciate the help. I also switched to delugevpn and that worked for me too. Quote Link to comment
snowboardjoe Posted April 8, 2019 Share Posted April 8, 2019 This docker is no longer working for me. Unable to debug it too. It keeps going through the process of grabbing all of the OPVN files from NordVPN and running that through sed to format all of them. It dies after a few minutes and restart all over again. Any suggestions to figure out what is happening here, or has this been abandoned? Quote Link to comment
clowrym Posted April 9, 2019 Author Share Posted April 9, 2019 (edited) 23 hours ago, snowboardjoe said: This docker is no longer working for me. Unable to debug it too. It keeps going through the process of grabbing all of the OPVN files from NordVPN and running that through sed to format all of them. It dies after a few minutes and restart all over again. Any suggestions to figure out what is happening here, or has this been abandoned? I can Help you with setting up the Docker etc, but I've only created the templates, if your having issues that dont relate to docker template settings, you can post HERE. One thing to note, if you arent Using PIA for your provider, you need to change the entries in the "OPENVPN_CONFIG:" variable to suit your providers config file names, they can be found HERE in your providers folder. Edited April 9, 2019 by clowrym Quote Link to comment
clowrym Posted April 10, 2019 Author Share Posted April 10, 2019 On 4/8/2019 at 2:44 PM, snowboardjoe said: This docker is no longer working for me. Unable to debug it too. It keeps going through the process of grabbing all of the OPVN files from NordVPN and running that through sed to format all of them. It dies after a few minutes and restart all over again. Any suggestions to figure out what is happening here, or has this been abandoned? I wonder if your issue is related to this? https://github.com/haugene/docker-transmission-openvpn/issues/764 Quote Link to comment
snowboardjoe Posted April 15, 2019 Share Posted April 15, 2019 On 4/10/2019 at 11:49 AM, clowrym said: I wonder if your issue is related to this? https://github.com/haugene/docker-transmission-openvpn/issues/764 I looked more into this today, but still unable to get it running again. The docker.log reports: time="2019-04-15T13:58:23-05:00" level=info msg="shim reaped" id=79a57e2ec068e23e5876a15802ec53bca5e21b02ecb518862be57b1d734a32aa time="2019-04-15T13:58:23.298963594-05:00" level=info msg="ignoring event" module=libcontainerd namespace=moby topic=/tasks/delete type="*events.TaskDelete" time="2019-04-15T13:58:23.316022846-05:00" level=warning msg="Failed to delete conntrack state for 172.17.0.13: invalid argument" time="2019-04-15T13:58:24-05:00" level=info msg="shim docker-containerd-shim started" address="/containerd-shim/moby/79a57e2ec068e23e5876a15802ec53bca5e21b02ecb518862be57b1d734a32aa/shim.sock" debug=false pid=27205 The log for the container itself is empty. Not sure what else to look at. Installed deludge and that's running, but would like to go back to Transmission if possible. Quote Link to comment
bobbo489 Posted April 26, 2019 Share Posted April 26, 2019 Is the MineOS username/password different than what is mentioned in the docker container download? I am trying to log into it and it just refreshes the log in page. It won't accept the default credentials. Quote Link to comment
clowrym Posted April 27, 2019 Author Share Posted April 27, 2019 Did you change the admin password? Should be mc & password if i remember correctly. Quote Link to comment
bobbo489 Posted April 30, 2019 Share Posted April 30, 2019 Nope, I have not changed anything. I just installed? the Docker Container started it and went to the webpage to log in. Tried both mc/password and mc/mypass. Neither works. Quote Link to comment
bobbo489 Posted April 30, 2019 Share Posted April 30, 2019 I am in. I forgot I could just go in through Portainer console and change the password in the shadow file with passwd.....sometimes I hate Linux and the logicalness of it. Quote Link to comment
bobbo489 Posted April 30, 2019 Share Posted April 30, 2019 But now I cannot get a server to run and this log entry from /var/log/mineos.log is kind of vague. Any thoughts on fixing this? {"level":"info","message":"[testing] received request \"start\"","timestamp":"2019-04-30T02:46:35.985Z"} {"command":"start","uuid":"2bbb5d00-6af2-11e9-b791-ab42d78053ab","time_initiated":1556592395984,"success":false,"err":"!up","time_resolved":1556592396086,"level":"error","message":"[testing] command \"start\" errored out:","timestamp":"2019-04-30T02:46:36.087Z"} Quote Link to comment
clowrym Posted April 30, 2019 Author Share Posted April 30, 2019 While I do run a couple server's, ive never run into any of these issues, Typically when I have had issue with starting servers, it was either user:group issues of the files within the mount points, or share mapping. Can you post your docker run command? Beyond any glaring issues there, you could also post an issue HERE Quote Link to comment
bobbo489 Posted May 1, 2019 Share Posted May 1, 2019 Not sure where to get that. I am using this all from UnRaid. So it is just choose it from the list, download it, and then select start. /var/log/docker.log doesn't show anything in there for the command run. This is the command PS info for the correlating process that started when the mineos container restarted. docker-containerd-shim -namespace moby -workdir /var/lib/docker/containerd/daemon/io.containerd.runtime.v1.linux/moby/82a7ab3eb8643a40f8f2933559da556ed50bdfd8a2f021b4dbf5f9979d05fade -address /var/run/docker/containerd/docker-containerd.sock -containerd-binary /usr/bin/docker-containerd -runtime-root /var/run/docker/runtime-runc Quote Link to comment
clowrym Posted May 1, 2019 Author Share Posted May 1, 2019 (edited) 15 hours ago, bobbo489 said: Not sure where to get that. I am using this all from UnRaid. So it is just choose it from the list, download it, and then select start. /var/log/docker.log doesn't show anything in there for the command run. This is the command PS info for the correlating process that started when the mineos container restarted. docker-containerd-shim -namespace moby -workdir /var/lib/docker/containerd/daemon/io.containerd.runtime.v1.linux/moby/82a7ab3eb8643a40f8f2933559da556ed50bdfd8a2f021b4dbf5f9979d05fade -address /var/run/docker/containerd/docker-containerd.sock -containerd-binary /usr/bin/docker-containerd -runtime-root /var/run/docker/runtime-runc CLick force resart and a window should pope up, your looking for this: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name='MineOS-node' --net='bridge' -e TZ="America/Denver" -e HOST_OS="Unraid" -e 'USER_PASSWORD'='password' -p '25565-25575:25565-25575/tcp' -p '8443:8443/tcp' -p '8120-8126:8120-8126/tcp' -p '25565:25565/udp' -v '/mnt/cache/appdata/minecraft/':'/var/games/minecraft':'rw' -v '/mnt/cache/minecraft':'/mnt/data':'rw' 'hexparrot/mineos' 479fd653a593c9ed8f3c2b7e150b6c26e540c50b6cb593d4964337fad4dace05 Also, can you check the user:group on the folders / subfolders, they all should be 1000:1000 per below Edited May 1, 2019 by clowrym Quote Link to comment
gacpac Posted May 5, 2019 Share Posted May 5, 2019 I'm having this problem with the transmission docker container. Is this a problem? because I want to get rid of this annoying message. I'm using PIA ErrorWarningSystemArrayLogin Sun May 5 05:13:18 2019 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #2687837 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings Sun May 5 05:13:18 2019 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #2687838 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings Quote Link to comment
clowrym Posted May 5, 2019 Author Share Posted May 5, 2019 8 hours ago, gacpac said: I'm having this problem with the transmission docker container. Is this a problem? because I want to get rid of this annoying message. I'm using PIA ErrorWarningSystemArrayLogin Sun May 5 05:13:18 2019 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #2687837 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings Sun May 5 05:13:18 2019 Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #2687838 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings Do you have this added : Quote Link to comment
gacpac Posted May 5, 2019 Share Posted May 5, 2019 Do you have this added : I have first part only, not the other part saying --muteSent from my Pixel 2 XL using Tapatalk Quote Link to comment
clowrym Posted May 5, 2019 Author Share Posted May 5, 2019 1 minute ago, gacpac said: I have first part only, not the other part saying --mute Sent from my Pixel 2 XL using Tapatalk Not all shown should read: --inactive 3600 --ping 10 --ping-exit 60 --mute-replay-warnings 1 Quote Link to comment
gacpac Posted May 5, 2019 Share Posted May 5, 2019 Not all shown should read: --inactive 3600 --ping 10 --ping-exit 60 --mute-replay-warnings That should do it then Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
gacpac Posted May 5, 2019 Share Posted May 5, 2019 That should do it then Sent from my Pixel 2 XL using Tapatalk Is there something I can do to inxrease my download speed. The speeds that I'm getting now are way off. Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
gacpac Posted May 5, 2019 Share Posted May 5, 2019 Im testing with Ubuntu. Maybe i can modify the peers or something else?Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.