vcadm Posted January 11 Share Posted January 11 7 hours ago, vcadm said: Having an issue getting Plateminder to install properly. I have installed both dockers below: open-alpr-http-wrapper platminder I have a separate vlan that is created on the unRaid server: 172.16.100.0/22 Both of these containers have static IPs assigned to them. I did notice that when i initally created the plateminder docker the config.yaml was created as a directory instead of a file. Also, there were no permissions on the docker so I added to keys for the PUID and PGID to be 99/100. I am a little confused on the plateminder config below is what I currently have: ############### sources: # Have an RTSP stream? - type: rtsp name: frLPR url: 'rtsp://plateminder:[email protected]:554/cam/realmonitor?channel=1&subtype=0' # How often an image should be captured. # Increments are in seconds. Fractional values (i.e. "0.5") can be used for # sub-second capturing. captureInterval: 1 # By default, plate-minder will restart a source if it ends with an error # code. Setting alwaysRestart to true will restart a source whether it ends # with an error code or not. alwaysRestart: false # Globally applied filters # Filter jpeg frames. Currently 'motion' and 'mask' filters are available. # Filters are processed in the order they are defined filters: # Masks out a portion of the frame. Note that any pixels within the mask # cannot be used for detection. - type: mask # Optional. Outputs an image to the './data' path # debug: true shapes: # Shapes are a series of x/y coordinates - 1267,0,1920,0,1920,100,1267,100 # Timestamp, top right # Crops the frame down to the largest area of motion detection - type: motion # Optional. Outputs an image to the './data' path # debug: true openALPR: # Path to ALPRToHTTP server url: http://172.16.100.55:3000/detect # OpenALPR supports the following country codes: # "au" => Australia # "auwide" => Australia Wide # "br" => Brazil # "br2" => Brazil Two Line # "eu" => Europe # "fr" => France # "gb" => United Kingdom # "in" => India # "kr" => South Korea # "kr2" => South Korea Two Line # "mx" => Mexico # "sg" => Singapore # "us" => United States # "vn2" => Vietnam Two Line country_code: 'us' # Attempts to match the plate number against a plate pattern # (e.g. md for Maryland, ca for California) # OpenALPR supports the following pattern codes based on the selected country # See: https://github.com/openalpr/openalpr/tree/master/runtime_data/postprocess pattern: 'us' # optional # Record detected license plate information recorders: # Output to a SQLite database - type: sqlite # Output to an MQTT host - type: mqtt url: <mqtt address> # Optional - Default base topic is 'plate-minder' baseTopic: plate-minder # Optional - Home Assistant Auto Discovery support. hassDiscovery: enable: true discoveryPrefix: homeassistant # Connection options can be found here: # https://github.com/mqttjs/MQTT.js#client #mqttOptions: username: username password: mypassword # Output files to a folder - type: file # Naming pattern of files to store. # Tokens ({{DATE}}, {{TIME}}, {{SOURCE}}, and {{PLATE}}) are replaced with # dynamic values. pattern: './data/images/{{DATE}}/{{SOURCE}}/{{TIME}}_{{PLATE}}.jpeg' # Files older than retainDays will be removed. retainDays: 30 ############### I set the openalpr address and port but not sure which mqtt server address to use. If I take the record section out of the config, it seems to start up. I would like to have this integrated into Home Assistant but there isn't much documentation for it. Would also like to have the web portion of plateminder too but don't see that in unraid. I ended up figuring it out I believe. I had been commenting out the user/pass section in plateminder for mqtt, however, I believe it was needing it. Being that the setting was in there I thought it was optional. After configuring the user/pass on mqtt and in plateminder for it, it is now functioning. Going to see if I can get the Home Assistant portion going and then will see how it goes. Quote Link to comment
adminmat Posted January 19 Share Posted January 19 Question about SpeedTest. Does the test run through the browser / client you are using? Or does it just test the speed from the container on the server? I'm running these tests from a browser in another state. I'm connected to my server via Wireguard. I'm getting some really weird results. Quote Link to comment
digiblur Posted January 20 Author Share Posted January 20 21 hours ago, adminmat said: Question about SpeedTest. Does the test run through the browser / client you are using? Or does it just test the speed from the container on the server? I'm running these tests from a browser in another state. I'm connected to my server via Wireguard. I'm getting some really weird results. It is between your browser and the container. 1 Quote Link to comment
thany Posted January 28 Share Posted January 28 My UniFI docker (you call it unms) seems to have lost its login information. Seems it's not being persisted anywhere, which makes sense, because there's no directory mapping. Nobody wants have to go through the setup every time Unraid has gone through a reboot, or the docker updated, or some other stop/start cycle. Can this be fixed please? Quote Link to comment
digiblur Posted January 28 Author Share Posted January 28 3 minutes ago, thany said: My UniFI docker (you call it unms) seems to have lost its login information. Seems it's not being persisted anywhere, which makes sense, because there's no directory mapping. Nobody wants have to go through the setup every time Unraid has gone through a reboot, or the docker updated, or some other stop/start cycle. Can this be fixed please? Looks like it is called UISP. Not Unifi. If you don't have the /config mapping then that is probably the issue. Quote Link to comment
thany Posted January 28 Share Posted January 28 (edited) 8 minutes ago, digiblur said: Looks like it is called UISP. Not Unifi. If you don't have the /config mapping then that is probably the issue. I was never asked to do that when I installed the docker. So how could I possibly have known to do this? Or indeed, how should I have known that it's apprently /config? Edit: scratch that, it's under "more settings", it's mapped to appdata/unms perfectly fine. And there is stuff in there. But I've also got another directory appdata/unifithat also has data. Could be renamed or something and reset itself because of that? Edited January 28 by thany whoops Quote Link to comment
digiblur Posted January 28 Author Share Posted January 28 You could always try to map it to another location to start fresh and see if there is something causing that. Another thing is to check to see if anyone else has this issue on the github for the container. https://github.com/Nico640/docker-unms I'm not currently using my edgerouter anymore to test this. Quote Link to comment
mikey6283 Posted February 2 Share Posted February 2 Hi for some reason all mqtt devices are not working , tried to reconfigure them but receiving errors. I have attached my recent. I have delete a sensor but it will not join any help woul dbe appreciated. Using '/app/data' as data directory Zigbee2MQTT:error 2024-02-01 18:54:38: Failed to configure 'Aqaramotion_Sensor', attempt 1 (Error: Read 0x54ef4410004e4b63/1 genPowerCfg(["batteryVoltage"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (5)) at DeconzAdapter.sendZclFrameToEndpoint (/app/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:666:23) at Request.send (/app/node_modules/zigbee-herdsman/src/controller/helpers/request.ts:79:20) at Endpoint.read (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:466:28) at configure (/app/node_modules/zigbee-herdsman-converters/src/devices/lumi.ts:1777:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:140:25) at Configure.configure (/app/lib/extension/configure.ts:120:13) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17)) Zigbee2MQTT:error 2024-02-01 18:57:09: Failed to configure 'TestZB1', attempt 1 (Error: Bind 0x0c4314fffea00f98/1 genOnOff from '0x00212effff06cefc/1' failed (waiting for response TIMEOUT) at DeconzAdapter.bind (/app/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:776:19) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:551:13) at setupAttributes (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:54:13) at result.configure (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:126:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:140:25) at Configure.configure (/app/lib/extension/configure.ts:120:13) at Immediate.<anonymous> (/app/lib/extension/configure.ts:72:17)) Zigbee2MQTT:error 2024-02-01 19:01:08: Publish 'set' 'state' to 'KitchenZBSpots2' failed: 'Error: Command 0x0c4314fffebb63d5/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (8))' Zigbee2MQTT:error 2024-02-01 19:03:07: Publish 'set' 'state' to 'KitchenZBSpots2' failed: 'Error: Command 0x0c4314fffebb63d5/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (9))' Zigbee2MQTT:error 2024-02-01 23:00:45: Publish 'set' 'state' to 'ReadingLight' failed: 'Error: Command 0xbc33acfffe549777/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (10))' Zigbee2MQTT:error 2024-02-01 23:00:45: Publish 'set' 'state' to 'Lighttv_1' failed: 'Error: Command 0x5c0272fffe98049e/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (14))' Zigbee2MQTT:error 2024-02-01 23:00:45: Publish 'set' 'state' to 'Lighttv_2' failed: 'Error: Command 0x588e81fffebb44de/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (13))' Zigbee2MQTT:error 2024-02-01 23:00:45: Publish 'set' 'state' to 'Lighttv_1' failed: 'Error: Command 0x5c0272fffe98049e/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (12))' Zigbee2MQTT:error 2024-02-01 23:00:45: Publish 'set' 'state' to 'Lighttv_2' failed: 'Error: Command 0x588e81fffebb44de/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (11))' Zigbee2MQTT:error 2024-02-01 23:17:01: Publish 'set' 'state' to ' GarageZBSwitch' failed: 'Error: Command 0x0c4314fffebb6572/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (15))' Zigbee2MQTT:error 2024-02-01 23:19:01: Publish 'set' 'state' to 'KitchenZBSpots2' failed: 'Error: Command 0x0c4314fffebb63d5/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (16))' Zigbee2MQTT:error 2024-02-02 05:53:43: Publish 'set' 'state' to ' GarageZBSwitch' failed: 'Error: Command 0x0c4314fffebb6572/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (17))' Zigbee2MQTT:error 2024-02-02 05:55:43: Publish 'set' 'state' to 'KitchenZBSpots2' failed: 'Error: Command 0x0c4314fffebb63d5/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (18))' Zigbee2MQTT:error 2024-02-02 15:45:47: Publish 'set' 'state' to 'ReadingLight' failed: 'Error: Command 0xbc33acfffe549777/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (19))' Zigbee2MQTT:error 2024-02-02 15:45:47: Publish 'set' 'state' to 'Lighttv_2' failed: 'Error: Command 0x588e81fffebb44de/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (21))' Zigbee2MQTT:error 2024-02-02 15:45:47: Publish 'set' 'state' to 'Lighttv_1' failed: 'Error: Command 0x5c0272fffe98049e/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (20))' Zigbee2MQTT:error 2024-02-02 18:56:20: Publish 'set' 'approach_distance' to 'AqaraFPIDetector' failed: 'Error: Write 0x54ef4410005872f8/1 manuSpecificLumi({"326":{"value":0,"type":32}}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (22))' Zigbee2MQTT:error 2024-02-02 19:00:35: Failed to configure 'Aqaramotion_Sensor', attempt 2 (Error: Read 0x54ef4410004e4b63/1 genPowerCfg(["batteryVoltage"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (23)) at DeconzAdapter.sendZclFrameToEndpoint (/app/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:666:23) at Request.send (/app/node_modules/zigbee-herdsman/src/controller/helpers/request.ts:79:20) at Endpoint.read (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:466:28) at configure (/app/node_modules/zigbee-herdsman-converters/src/devices/lumi.ts:1777:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:140:25) at Configure.configure (/app/lib/extension/configure.ts:120:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17)) Zigbee2MQTT:error 2024-02-02 19:01:07: Failed to configure 'AqaraFPIDetector', attempt 1 (Error: Read 0x54ef4410005872f8/1 manuSpecificLumi([268], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":4447,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (24)) at DeconzAdapter.sendZclFrameToEndpoint (/app/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:666:23) at Request.send (/app/node_modules/zigbee-herdsman/src/controller/helpers/request.ts:79:20) at Endpoint.read (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:466:28) at configure (/app/node_modules/zigbee-herdsman-converters/src/devices/lumi.ts:1866:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:140:25) at Configure.configure (/app/lib/extension/configure.ts:120:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17)) Zigbee2MQTT:error 2024-02-02 19:02:02: Publish 'set' 'state' to 'diningroom_1' failed: 'Error: Command 0x5c0272fffe98df40/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (26))' Zigbee2MQTT:error 2024-02-02 19:02:03: Publish 'set' 'state' to 'diningroom_2' failed: 'Error: Command 0x847127fffe2d2d4d/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (27))' Zigbee2MQTT:error 2024-02-02 19:02:06: Publish 'set' 'state' to 'diningroom_3' failed: 'Error: Command 0x847127fffedebae0/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (28))' Zigbee2MQTT:error 2024-02-02 19:05:41: Publish 'set' 'state' to 'KitchenZBSpots2' failed: 'Error: Command 0x0c4314fffebb63d5/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (29))' Zigbee2MQTT:error 2024-02-02 19:05:51: Publish 'set' 'state' to 'Conservatory_2' failed: 'Error: Command 0x00158d000324a087/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (30))' Zigbee2MQTT:error 2024-02-02 19:05:58: Publish 'set' 'state' to 'Conservatory_1' failed: 'Error: Command 0x00158d000324c0ac/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (31))' Zigbee2MQTT:error 2024-02-02 19:08:44: Publish 'set' 'state' to 'ReadingLight' failed: 'Error: Command 0xbc33acfffe549777/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (34))' Zigbee2MQTT:error 2024-02-02 19:08:44: Publish 'set' 'state' to 'Lighttv_2' failed: 'Error: Command 0x588e81fffebb44de/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (33))' Zigbee2MQTT:error 2024-02-02 19:08:44: Publish 'set' 'state' to 'Lighttv_1' failed: 'Error: Command 0x5c0272fffe98049e/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (32))' Using '/app/data' as data directory Zigbee2MQTT:error 2024-02-02 19:25:58: Publish 'set' 'state' to 'KitchenZBSpots2' failed: 'Error: Command 0x0c4314fffebb63d5/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (10))' Zigbee2MQTT:error 2024-02-02 19:28:29: Failed to configure 'TestZB1', attempt 1 (Error: Bind 0x0c4314fffea00f98/1 genOnOff from '0x00212effff06cefc/1' failed (waiting for response TIMEOUT) at DeconzAdapter.bind (/app/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:776:19) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:551:13) at setupAttributes (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:54:13) at result.configure (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:126:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:140:25) at Configure.configure (/app/lib/extension/configure.ts:120:13) at Immediate.<anonymous> (/app/lib/extension/configure.ts:72:17)) Quote Link to comment
digiblur Posted February 2 Author Share Posted February 2 Reading part of the log you might be using conbee? https://github.com/Koenkk/zigbee2mqtt/issues/21162 Quote Link to comment
BurningSky Posted February 3 Share Posted February 3 I'm having the same issue so might downgrade until there seems to be a resolution, how do I do that on this container? Would setting the repo to koenkk/zigbee2mqtt:1.35.1 work? Quote Link to comment
digiblur Posted February 3 Author Share Posted February 3 5 hours ago, BurningSky said: I'm having the same issue so might downgrade until there seems to be a resolution, how do I do that on this container? Would setting the repo to koenkk/zigbee2mqtt:1.35.1 work? Check the tags here to be sure https://hub.docker.com/r/koenkk/zigbee2mqtt/tags Quote Link to comment
BurningSky Posted February 3 Share Posted February 3 2 hours ago, digiblur said: Check the tags here to be sure https://hub.docker.com/r/koenkk/zigbee2mqtt/tags Ah of course! Thanks, forgot about the tags webpage! Quote Link to comment
adminmat Posted March 3 Share Posted March 3 (edited) Just want to clarify something here. I ran the Speedtest on my local network with my laptop. Unraid is hosting the container. Download = Rate of data from laptop to server (container) ? Upload = Rate of data from server (container) to laptop ? So sort of opposite of what the internet / Ookla Speedtest does? If this is the case why not reverse the Download / Upload labels? Edited March 3 by adminmat Quote Link to comment
dopeytree Posted April 15 Share Posted April 15 Getting this on the silabs [04:46:31:062449] Info : ENCRYPTION IS DISABLED [04:46:31:062452] Info : Starting daemon in normal mode [04:46:31:062485] *** ASSERT *** : FATAL system call in function 'driver_uart_open' in file /usr/src/cpc-daemon/driver/driver_uart.c at line #323 : No such file or directory [04:46:32:062637] Info : Daemon exiting with status EXIT_FAILURE Logger buffer size = 28672, highwater mark = 2215 : 7.73%. Lost logs : 0 2024-04-15 04:46:32 [INFO] CPC ended with exit code 1 (signal 0)... 2024-04-15 04:46:33 [INFO] Starting cpcd... [04:46:33:158676] Info : [CPCd v4.3.1.0] [Library API v3] [RCP Protocol v4] [04:46:33:158720] Info : Git commit: 133b29678b3d0bc7578e098d2f46b4d5bcd2ebb4 / branch: [04:46:33:158722] Info : Sources hash: ff8300587e7e4ab1def7a89a272c0baef32f9eb3bff9b0ba06b94e655d652367 [04:46:33:158728] WARNING : In function 'main' in file /usr/src/cpc-daemon/main.c at line #186 : Running CPCd as 'root' is not recommended. Proceed at your own risk. [04:46:33:158742] Info : Reading cli arguments [04:46:33:158745] Info : /usr/local/bin/cpcd [04:46:33:158860] Info : Reading configuration [04:46:33:158861] Info : file_path = /usr/local/etc/cpcd.conf [04:46:33:158862] Info : instance_name = cpcd_0 [04:46:33:158863] Info : socket_folder = /dev/shm [04:46:33:158864] Info : operation_mode = MODE_NORMAL [04:46:33:158865] Info : use_encryption = false [04:46:33:158866] Info : binding_key_file = /root/.cpcd/binding.key [04:46:33:158867] Info : stdout_tracing = false [04:46:33:158868] Info : file_tracing = false [04:46:33:158869] Info : lttng_tracing = false [04:46:33:158870] Info : enable_frame_trace = false [04:46:33:158871] Info : traces_folder = /dev/shm/cpcd-traces [04:46:33:158872] Info : bus = UART [04:46:33:158873] Info : uart_baudrate = 460800 [04:46:33:158874] Info : uart_hardflow = true [04:46:33:158875] Info : uart_file = /dev/thread [04:46:33:158876] Info : fu_recovery_pins_enabled = false [04:46:33:158877] Info : fu_connect_to_bootloader = false [04:46:33:158878] Info : fu_enter_bootloader = false [04:46:33:158879] Info : restart_cpcd = false [04:46:33:158880] Info : application_version_validation = false [04:46:33:158881] Info : print_secondary_versions_and_exit = false [04:46:33:158882] Info : use_noop_keep_alive = false [04:46:33:158883] Info : reset_sequence = true [04:46:33:158883] Info : stats_interval = 0 [04:46:33:158885] Info : rlimit_nofile = 2000 [04:46:33:158885] Info : ENCRYPTION IS DISABLED [04:46:33:158886] Info : Starting daemon in normal mode [04:46:33:158891] *** ASSERT *** : FATAL system call in function 'driver_uart_open' in file /usr/src/cpc-daemon/driver/driver_uart.c at line #323 : No such file or directory [04:46:34:158969] Info : Daemon exiting with status EXIT_FAILURE Logger buffer size = 28672, highwater mark = 2215 : 7.73%. Lost logs : 0 Quote Link to comment
digiblur Posted April 15 Author Share Posted April 15 You need to pass in the multipan firmware stick as the path you provide. Quote Link to comment
dopeytree Posted April 15 Share Posted April 15 (edited) /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_5aa28a0ce09ced11947d7dfaa7669f5d-if00-port0 Edited April 15 by dopeytree Quote Link to comment
digiblur Posted April 15 Author Share Posted April 15 Add :/dev/thread to the end of your pass through Quote Link to comment
dopeytree Posted April 15 Share Posted April 15 Thanks, some progress it now prints this: Quote Link to comment
digiblur Posted April 15 Author Share Posted April 15 (edited) Which firmware do you have on it? EDIT: I'm using https://github.com/NabuCasa/silabs-firmware/blob/main/RCPMultiPAN/beta/NabuCasa_SkyConnect_RCP_v4.3.1_rcp-uart-hw-802154_460800.gbl Edited April 15 by digiblur Quote Link to comment
Painfreeze Posted April 16 Share Posted April 16 Hello, to reach my ESPHome Dashboard - i would like to add an username and password. Do you have any advise for me? Thank you in advanced. Quote Link to comment
digiblur Posted April 16 Author Share Posted April 16 3 hours ago, Painfreeze said: Hello, to reach my ESPHome Dashboard - i would like to add an username and password. Do you have any advise for me? Thank you in advanced. Try the password and user on the dashboard commands possibly. Not sure if it works passing it in as docker run commands, just never tried it. https://esphome.io/guides/cli.html?highlight=authentication#dashboard-command Quote Link to comment
Painfreeze Posted April 17 Share Posted April 17 20 hours ago, digiblur said: Try the password and user on the dashboard commands possibly. Not sure if it works passing it in as docker run commands, just never tried it. https://esphome.io/guides/cli.html?highlight=authentication#dashboard-command Thank you. That was a good hint and it works now. Attached the screenshots what i did. Quote Link to comment
Kosh42EFG Posted June 11 Share Posted June 11 Firstly - loving your work and a long time video watcher. And sorry for running HA as a VM, not a Docker. I do not feel responsible enough to be the Supervisor My question is about the Plate-Minder Unraid. I've installed it and realised that it's set up the config.yaml as a directory, deleted that and created a blank config.yaml file (as per here where it says you can have a blank one and config in the UI: https://github.com/sclaflin/Plate-Minder?tab=readme-ov-file#configyaml) @vcadm mentioned setting up GUID and PGID but as an Unraid newbie I'm unsure how to do this? Any help welcome, as at the moment I'm in a restart loop with it spooling out loads of indecipherable junk to log then restarting, repeat ad nauseum. Quote Link to comment
amix Posted June 12 Share Posted June 12 (edited) Hi, since I found no way to have my Sonoff ZBDongle-E get recognized by zigbee2mqtt (Home Assistant immediately found it without using zigbee2mqtt), as a last resort, I tried to add a device path to the zigbee2mqtt settings. This resulted in a failed restart of the container. But now the zigbee2mqtt container has gone from the installed containers list in unRAID. Physically, it is still there. It's just, that unRAID forgot about it. (In the end I would like to run openHAB with this dongle, using zigbee2mqtt) How can I make unRAID become aware, that zigbee2mqtt container is installed? Like, re-registering it without re-installing it. Another problem I have is with the IP. Sometimes I get a reply from that IP, sometimes not. I would like to run the container with the same IP as my unRAID host is known to the network, using a port of my choice. How can I achieve this? Thanks. Edited June 14 by amix typo, clarification, added second issue, struck through solved isse Quote Link to comment
amix Posted June 14 Share Posted June 14 (edited) On 6/21/2021 at 2:01 AM, jj_uk said: zigbee2mqtt: Is it just a case of plugging in a USB coordinator and it'll find it, or is there a process to follow? The auto-generated config file shows: # Serial settings serial: # Location of CC2531 USB sniffer port: /dev/ttyACM0 How does unraid pass a USB device to a docker? Did you find a solution? I got a Sonoff ZigBee USB Coordinator at that path but I get this: root@nas:/mnt/user/appdata/zigbee2mqtt/log/2024-06-11.13-34-06# cat log.log [2024-06-11 13:34:06] info: z2m: Logging to console, file (filename: log.log) [2024-06-11 13:34:06] info: z2m: Starting Zigbee2MQTT version 1.38.0 (commit #fe048e6) [2024-06-11 13:34:06] info: z2m: Starting zigbee-herdsman (0.49.2) [2024-06-11 13:34:06] error: zh:zstack:znp: Failed to determine if path is valid: 'Error: ENOENT: no such file or directory, lstat '/dev/ttyACM0'' [2024-06-11 13:34:06] info: zh:zstack:znp: Opening SerialPort with {"path":"/dev/ttyACM0","baudRate":115200,"rtscts":false,"autoOpen":false} [2024-06-11 13:34:06] error: z2m: Error while starting zigbee-herdsman [2024-06-11 13:34:06] error: z2m: Failed to start zigbee [2024-06-11 13:34:06] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start.html for possible solutions [2024-06-11 13:34:06] error: z2m: Exiting... [2024-06-11 13:34:06] error: z2m: Error: Error: No such file or directory, cannot open /dev/ttyACM0 The configuration is this: root@nas:/mnt/user/appdata/zigbee2mqtt# cat configuration.yaml homeassistant: false frontend: true mqtt: base_topic: zigbee2mqtt server: mqtt://localhost serial: port: /dev/ttyACM0 advanced: network_key: - 135 - 138 - 7 - 91 - 65 - 233 - 79 - 70 - 6 - 243 - 162 - 38 - 245 - 92 - 244 - 231 pan_id: 23217 ext_pan_id: - 151 - 237 - 249 - 52 - 62 - 197 - 174 - 251 There is a note in the docker image configuration, that I do not fully understand: Quote All users MUST edit the configuration.yaml file in the appdata zigbee2mqtt folder to specify the serial port (or tcp port) for the zigbee adapter. If you are using a USB adapter add it via dev serial ID and point it to /dev/zigbee for ease of use. Example value: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0:/dev/zigbee How is the exact (and full) syntax for this "Example value:" and where do I need to place it? Thanks. On a sidenote: I found the orphaned container (as mentioned in my previous post) and now know, that I have to reinstall it. Edited June 14 by amix clarification Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.