s.Oliver Posted December 4, 2018 Share Posted December 4, 2018 2 minutes ago, 1812 said: I was compiling the hp proliant bzimage while running my pfsense firewall, and hosting an external facing cloud. It's usually not that active. Usually runs between 10-30% I'm using one of the baked in themes. ah, i see. i use the black theme (but i tried all others and never saw this "line" effect). hmm...? Quote Link to comment
1812 Posted December 4, 2018 Share Posted December 4, 2018 1 hour ago, Zonediver said: EDIT2: Would be nice if the gray bar could be green 👍 I actually thought that as well, but then the mike and ike color scheme that is in the hd capacity display might be overwhelming if expanded to the cpu usage bars: Quote Link to comment
1812 Posted December 4, 2018 Share Posted December 4, 2018 Just now, s.Oliver said: ah, i see. i use the black theme (but i tried all others and never saw this "line" effect). hmm...? It might also be something safari is doing in rendering the gui. Quote Link to comment
trurl Posted December 4, 2018 Share Posted December 4, 2018 33 minutes ago, MortenBN1988 said: Starting in GUI Safe mode works If it works in SAFE mode then that would seem to indicate an issue with one of your plugins. SAFE mode just skips plugin loading. Are all your plugins up-to-date? Quote Link to comment
s.Oliver Posted December 4, 2018 Share Posted December 4, 2018 2 hours ago, 1812 said: It might also be something safari is doing in rendering the gui. hmm... just tried safari with the black theme, but it rendered same as firefox. well, well. Quote Link to comment
1812 Posted December 4, 2018 Share Posted December 4, 2018 5 minutes ago, s.Oliver said: hmm... just tried safari with the black theme, but it rendered same as firefox. well, well. I just looked, i'm on gray theme (I couldn't remember) black looks like this for me on firefox on the dashboard Quote Link to comment
s.Oliver Posted December 4, 2018 Share Posted December 4, 2018 5 minutes ago, 1812 said: I just looked, i'm on gray theme (I couldn't remember) strange, switched once more and now i do see these thin lines as bars as well. but then, i'm too hooked on the black theme (navi bars, condensed look), so went back. i wish i could get that line-look in the black theme 🙂 Quote Link to comment
bonienl Posted December 4, 2018 Share Posted December 4, 2018 7 hours ago, hawihoney said: Yes, that worked. Colors on Dashboard are correct now. Can you please elaborate a little bit. Is this a bug or WAD? This action clears a configuration file on your flash device. Part of a fix introduced some versions ago (can't remember exactly which one) Quote Link to comment
bonienl Posted December 4, 2018 Share Posted December 4, 2018 4 hours ago, Zonediver said: EDIT: Ah, i see... the color comes automaticly Quote Link to comment
MortenBN1988 Posted December 4, 2018 Share Posted December 4, 2018 4 hours ago, trurl said: If it works in SAFE mode then that would seem to indicate an issue with one of your plugins. SAFE mode just skips plugin loading. Are all your plugins up-to-date? All plugins and dockers are updated (and working). It's only GUI safe mode (which uses the bzroot-gui file) that works. Regular safe mode, that uses the usual bzroot file doesn't. So it seems to be specific to the bzroot file. Quote Link to comment
trurl Posted December 5, 2018 Share Posted December 5, 2018 1 hour ago, MortenBN1988 said: All plugins and dockers are updated (and working). It's only GUI safe mode (which uses the bzroot-gui file) that works. Regular safe mode, that uses the usual bzroot file doesn't. So it seems to be specific to the bzroot file. Does GUI not-safe mode work? How about if you try GUI not-safe mode but before booting rename your config/plugins folder so none of the plugins load? Quote Link to comment
bnevets27 Posted December 5, 2018 Share Posted December 5, 2018 Just updated. What the hell? Why does unraid think this disk was 4TB? What do I do here? I could of course just start it and let it build parity but there should be no reason to need to do so. Quote Link to comment
s.Oliver Posted December 5, 2018 Share Posted December 5, 2018 6 hours ago, bnevets27 said: Just updated. What the hell? Why does unraid think this disk was 4TB? What do I do here? I could of course just start it and let it build parity but there should be no reason to need to do so. never seen, that unRAID detects are drive wrong. Quote Link to comment
John_M Posted December 5, 2018 Share Posted December 5, 2018 6 hours ago, bnevets27 said: Why does unraid think this disk was 4TB? It looks as though your boot flash might be corrupted. You can check it in a PC. You could start a new thread in General Support and post diagnostics. Quote Link to comment
John_M Posted December 5, 2018 Share Posted December 5, 2018 19 minutes ago, s.Oliver said: never seen, that unRAID detects are drive wrong. It's detecting it correctly, as 8 TB. It's it "memory" of the disk that's wrong. It's expecting to see a 4 TB disk, so probably a corrupt file on the flash. Quote Link to comment
bonienl Posted December 5, 2018 Share Posted December 5, 2018 19 hours ago, Benson said: When array in stop state, GUI "Slots" broken ? http://192.168.X.X/webGui/images/sum.png Chrome Edge Not broken but a display glitch. Will be fixed in future release. Quote Link to comment
Vr2Io Posted December 5, 2018 Share Posted December 5, 2018 55 minutes ago, bonienl said: Not broken but a display glitch. Will be fixed in future release. Note and tks Quote Link to comment
Srengr Posted December 5, 2018 Share Posted December 5, 2018 Updated two servers 6.6.5 --> 6.6.6 with no issues. Quote Link to comment
Futility Posted December 5, 2018 Share Posted December 5, 2018 A new banner seems to be in order 2 Quote Link to comment
bnevets27 Posted December 5, 2018 Share Posted December 5, 2018 5 hours ago, John_M said: It looks as though your boot flash might be corrupted. You can check it in a PC. You could start a new thread in General Support and post diagnostics. Server is in a remote location so I can't do this easily. But I did open a thread. Though I get the feeling you are right, and the super.dat got corrupted. Would be nice if that could get fixed without doing another parity rebuild. Quote Link to comment
limetech Posted December 5, 2018 Author Share Posted December 5, 2018 2 minutes ago, bnevets27 said: Server is in a remote location so I can't do this easily. But I did open a thread. Though I get the feeling you are right, and the super.dat got corrupted. Would be nice if that could get fixed without doing another parity rebuild. Please post diagnostics. Tools/Diagnostics Quote Link to comment
bnevets27 Posted December 5, 2018 Share Posted December 5, 2018 Please post diagnostics. Tools/Diagnosticshttps://forums.unraid.net/topic/76129-wrong-disk-but-sn-matches/&share_tid=76129&share_fid=18593&share_type=t Quote Link to comment
Shlazor Posted December 5, 2018 Share Posted December 5, 2018 I am new to UnRAID so this might be me... I updated to 6.6.6 and now I can't get to the unRAID GUI from a windows machine by typing "Tower" in the browser. I can get there with an IP address. Don't know if I did something else somewhere. As I mentioned, still learning. Quote Link to comment
Futility Posted December 5, 2018 Share Posted December 5, 2018 3 minutes ago, Shlazor said: I can't get to the unRAID GUI from a windows machine by typing "Tower" in the browser. Have you tried "//tower" or "http://tower" ? Quote Link to comment
Shlazor Posted December 5, 2018 Share Posted December 5, 2018 Yep, at the bottom of the browser (Chrome), in the status line, it simply says "Waiting for available socket..." and nothing ever happens. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.