Selecting a Gigabit switch?


unRaidMe

Recommended Posts

Is there anything I need to look out for when purchasing a gigabit switch? It seems like a lot of people connect to a gigabit switch and then to their wireless router and then to the cable modem... is this correct?

 

There are two switches on newegg for less than $30:

http://www.newegg.com/Product/Product.aspx?Item=N82E16833122140&cm_re=gigabit_switch-_-33-122-140-_-Product

http://www.newegg.com/Product/Product.aspx?Item=N82E16833122128&cm_re=gigabit_switch-_-33-122-128-_-Product

 

What do you think between these two? Any other recommendations for a gigabit switch?

 

Thanks in advance!

Link to comment

That is how I have my equipment connected.

 

 

I have a couple of these, but I paid 10 a piece for them after rebate (32.98):

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16833156259

 

This is a bit better and cheaper (27.99):

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16833156250

 

If you want eight ports (37.99):

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16833156251

Link to comment

I've been using a D-Link DGS-2208 heavily (24/7/365) for a year now without issue, the low power consumption was a plus for me. I have also used several of the Netgear GS105 and GS108, and they did seem to get hot, one of the GS108 failed after a few days, a capacitor looked burnt out too me.

 

Mine is connected up as follows:

 

Cable Modem > DD-WRT wireless router > Gigabit switch

Link to comment

I just bought an HP 1410-16G switch (16 port GIGABIT) for a new house I am building - planning on using (connecting to wall socket) about 10-12 of the ports.

 

Will actually use about 8-9 simultaneously once my kids get bigger and have demands.

 

1x ISP router

1x kitchen

1-2x living room

4x bedrooms

1-2x study/game room

 

Link to comment

Hello.

 

I have a very simple question regarding GbE network, so I won't open a new topic. I was just wondering if it was possible to enable two GbE ports at the same time (with a dual port MB or a network card) and set one of these two ports to use Jumbo Frames (while the other one remains at default).

 

The thing is that I want to enable Jumbo Frames to speed up transfers but if I do that, I can no more stream media files to my NMT as it doesn't support Jumbo Frames. The configuration will look something like this:

 

NAS (Jumbo Frames enabled on Port 1) <> GbE switch <> PC (Jumbo Frames enabled) : used to transfer files

NAS (Jumbo Frames disabled on Port 2) <> GbE switch <> NMT (no support for Jumbo Frames) : used to stream media files

 

Does this configuration makes sense?

Link to comment
  • 1 month later...

After having a handful of Linksys/Dlink/Netgear switches overheat and start dropping packets or worse and burn out completely, I got a 8 port HP switch.  http://www.newegg.com/Product/Product.aspx?Item=N82E16833316076

 

I bleed Cisco green through and through, but for an unmanaged gigabit switch the HP line is both affordable and reliable.

 

They also have a POE powered one which is pretty cool in my book.

http://www.newegg.com/Product/Product.aspx?Item=N82E16833316155

 

 

Link to comment

+1 for the HP ProCurve!

 

I have 2x 8-port unmanaged switches, and they just work. They stay cool and the lifetime warranty is nice :).

 

 

ya - me too.  I have a pile of other brands I've removed and replaced with these HP switches.  Of course they are twice as much as the cheaper switches too.

 

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.