SimonF Posted February 15, 2023 Share Posted February 15, 2023 7 hours ago, jeffreywhunter said: That made a difference, I was able to load the drivers and then update the plugin. Unfortunately, I'm seeing N/A on all the various display items. are you using a nvidia GPU? Did you select the GPU under the type selection in settings? Quote Link to comment
jaybigman77 Posted February 15, 2023 Share Posted February 15, 2023 (edited) how can i fix this error lastest version 00:02.0 VGA compatible controller: Intel Corporation RocketLake-S GT1 [UHD Graphics 730] (rev 04) powerdraw.txt Edited February 15, 2023 by jaybigman77 more info Quote Link to comment
ich777 Posted February 15, 2023 Share Posted February 15, 2023 1 hour ago, jaybigman77 said: how can i fix this error lastest version You provide very little information, can you please post your Diagnostics? What iGPU are you using, it is possible that your iGPU doesn't output the power draw. Quote Link to comment
jaybigman77 Posted February 15, 2023 Share Posted February 15, 2023 12 minutes ago, ich777 said: You provide very little information, can you please post your Diagnostics? What iGPU are you using, it is possible that your iGPU doesn't output the power draw. What info do i need to include Quote Link to comment
ich777 Posted February 15, 2023 Share Posted February 15, 2023 4 minutes ago, jaybigman77 said: What info do i need to include As mentioned above the Diagnostics. Quote Link to comment
jeffreywhunter Posted February 15, 2023 Share Posted February 15, 2023 10 hours ago, SimonF said: are you using a nvidia GPU? Did you select the GPU under the type selection in settings? I have an ASUS P8P67 Deluxe Mobo with onboard graphics which I believe is Intel based. I've tried all three options, no response from any of them. Perhaps it does not support onboard graphics? Quote Link to comment
ich777 Posted February 15, 2023 Share Posted February 15, 2023 5 minutes ago, jeffreywhunter said: ASUS P8P67 This is SandyBridge... SandyBridge wont do much nowadays in terms of transcoding, see the transcoding matrix here, so to speak only h264 (AVC), h265 (HEVC) isn't even supported. Quote Link to comment
smdion Posted February 15, 2023 Share Posted February 15, 2023 (edited) Have the issue of some others with an AMD APU not showing up on the current build. Running on a beelink SER5 with 5600H. 04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c6) 1676484803.315975: bus 04, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 0.85% 25.93mb, gtt 0.07% 10.20mb, mclk 100.00% 1.600ghz, sclk 22.87% 0.412ghz VENDOR="amd" GPUID="04" TEMPFORMAT="C" DISPCLOCKS="1" DISPENCDEC="1" DISPPCIUTIL="1" DISPTEMP="1" DISPFAN="1" DISPPWRDRAW="1" DISPPWRSTATE="1" DISPTHROTTLE="1" DISPSESSIONS="1" UIREFRESH="1" UIREFRESHINT="1000" DISPMEMUTIL="1" DISP3DRENDER="1" DISPBLITTER="1" DISPVIDEO="1" DISPVIDENH="1" DISPINTERRUPT="1" DISPEVENT="1" DISPVERTEX="1" DISPTEXTURE="1" DISPSHADEREXP="1" DISPSEQUENCER="1" DISPSHADERINTER="1" DISPSCANCON="1" DISPPRIMASSEM="1" DISPDEPTHBLK="1" DISPCOLORBLK="1" DISPGFXTRANS="1" But does work on - https://raw.githubusercontent.com/b3rs3rk/gpustat-unraid/6cf1b1e96bc8cd5c1cf7ac8fefea1271d8891e26/gpustat.plg Edited February 15, 2023 by smdion Quote Link to comment
SimonF Posted February 15, 2023 Share Posted February 15, 2023 2 hours ago, jeffreywhunter said: I have an ASUS P8P67 Deluxe Mobo with onboard graphics which I believe is Intel based. I've tried all three options, no response from any of them. Perhaps it does not support onboard graphics? if you run intel_gpu_top from cmdline what do you get. Quote Link to comment
jeffreywhunter Posted February 15, 2023 Share Posted February 15, 2023 20 minutes ago, SimonF said: if you run intel_gpu_top from cmdline what do you get. root@HunterNAS:~# intel_gpu_top bash: intel_gpu_top: command not found Appears I'm missing something... Quote Link to comment
SimonF Posted February 15, 2023 Share Posted February 15, 2023 Just now, jeffreywhunter said: root@HunterNAS:~# intel_gpu_top bash: intel_gpu_top: command not found Appears I'm missing something... you n4ed to install intel gpu top from ca for intel igpu. 1 Quote Link to comment
jeffreywhunter Posted February 15, 2023 Share Posted February 15, 2023 (edited) 1 hour ago, SimonF said: you n4ed to install intel gpu top from ca for intel igpu. Thanks! Appears that's the issue. Although it also appears that not all the trackable features show up... Here's what intel_top_gpu displays Edited February 15, 2023 by jeffreywhunter Quote Link to comment
SimonF Posted February 15, 2023 Share Posted February 15, 2023 9 minutes ago, jeffreywhunter said: Appears that's the issue. Although it also appears that not all the trackable features show up... does it match intel_gpu_top? 1 Quote Link to comment
mikeyosm Posted February 15, 2023 Share Posted February 15, 2023 Is it possible for the plugin to show more than 1 GPU on the dashboard? Quote Link to comment
SimonF Posted February 15, 2023 Share Posted February 15, 2023 1 minute ago, mikeyosm said: Is it possible for the plugin to show more than 1 GPU on the dashboard? No it only does one. Quote Link to comment
jeffreywhunter Posted February 15, 2023 Share Posted February 15, 2023 48 minutes ago, SimonF said: does it match intel_gpu_top? Apparently. Several of the sensors don't display. Not unexpected since this is a mobo driven GPU. Consider it good enough for now. Thanks! 1 Quote Link to comment
ich777 Posted February 16, 2023 Share Posted February 16, 2023 8 hours ago, jeffreywhunter said: Not unexpected since this is a mobo driven GPU. No, this is a iGPU from the CPU, these are two different things. 8 hours ago, jeffreywhunter said: Apparently. Several of the sensors don't display. As said above, your CPU is simply too old to display Video Enhance, you need a CPU that is at least capable of transcoding h265 (HEVC) to have that displayed. If you have a newer CPU it would display everything just fine and would be as capable as a GTX1050Ti for transcoding. 1 Quote Link to comment
mikeyosm Posted February 16, 2023 Share Posted February 16, 2023 I had to roll back gpu stat plugin to 2022.02.22 so that both (igpu and dgpu) AMD gpus are detected. The latest version (2022.11.30a) of the plugin breaks this, when will this be fixed please? Quote Link to comment
jeffreywhunter Posted February 17, 2023 Share Posted February 17, 2023 (edited) 19 hours ago, ich777 said: No, this is a iGPU from the CPU, these are two different things. As said above, your CPU is simply too old to display Video Enhance, you need a CPU that is at least capable of transcoding h265 (HEVC) to have that displayed. If you have a newer CPU it would display everything just fine and would be as capable as a GTX1050Ti for transcoding. For anyone that is interested, I searched on what is the minimum hardware requirement for Video Enhance AI? A DirectX12 compatible GPU (NVidia or AMD). An Intel CPU from 2015 onwards or an AMD CPU from 2016 onwards are apparently the minimum requirements for the CPU. Thanks ich777! Edited February 17, 2023 by jeffreywhunter Quote Link to comment
Robert_Chandra Posted February 18, 2023 Share Posted February 18, 2023 Did the fix for AMD GPUs not showing up in the dropdown ever get updated? Quote Link to comment
iball Posted February 22, 2023 Share Posted February 22, 2023 On 2/17/2023 at 11:00 PM, Robert_Chandra said: Did the fix for AMD GPUs not showing up in the dropdown ever get updated? Nope. I had to uninstall the latest version and reinstall an older version to get the AMD iGPU to show up. Quote Link to comment
Joshndroid Posted February 23, 2023 Share Posted February 23, 2023 Also have a broken GPU stat on AMD dedicated GPU 6600xt. Quote Link to comment
SimonF Posted February 23, 2023 Share Posted February 23, 2023 I have created a PR for b3rs3rk's plugin to add MultiGPU support for 6.12 as Dashboard panels are different in 6.12. The PR works on pre realeases but does not provide Multi support. There are some other enhancements like being able to select Intel iGPU or ARC cards. Adding the correct model on the screen. Selection for Intel to select the GPU/Package or Max of the them for Powerdraw as the driver doesn't always report GPU. You can review the PR here: https://github.com/b3rs3rk/gpustat-unraid/pull/52 b3rs3rk's is currently reviewing the PR. Note the image is with test data, but there are other images on the PR. 2 1 Quote Link to comment
Cicatrix Posted February 26, 2023 Share Posted February 26, 2023 Not running for my iGPU (5700G): 30:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c8) 1677445836.606015: bus 30, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 0.30% 24.84mb, gtt 0.09% 10.20mb, mclk 100.00% 1.600ghz, sclk 20.67% 0.413ghz "cd /usr/local/emhttp/plugins/gpustat/ && php ./gpustatus.php" gives nothing to me. bash: /boot/config/plugins/gpustat/gpustat.cfg: Permission denied And I can't choose the controller: Do you need some more information? Quote Link to comment
SimonF Posted February 26, 2023 Share Posted February 26, 2023 16 minutes ago, Cicatrix said: Not running for my iGPU (5700G): 30:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c8) 1677445836.606015: bus 30, gpu 0.00%, ee 0.00%, vgt 0.00%, ta 0.00%, sx 0.00%, sh 0.00%, spi 0.00%, sc 0.00%, pa 0.00%, db 0.00%, cb 0.00%, vram 0.30% 24.84mb, gtt 0.09% 10.20mb, mclk 100.00% 1.600ghz, sclk 20.67% 0.413ghz "cd /usr/local/emhttp/plugins/gpustat/ && php ./gpustatus.php" gives nothing to me. bash: /boot/config/plugins/gpustat/gpustat.cfg: Permission denied And I can't choose the controller: Do you need some more information? There is a test load on my pr above that may allow you to select amd until the author releases a new package. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.