SimonF Posted March 18, 2023 Share Posted March 18, 2023 (edited) 20 minutes ago, CrazyBoyS said: I just installed 13th gen mobo and cpu. Was using Nvidia P400 before but now I am using the Intel Onboard 770 chipset. I have reset my GPU statistic and also reinstalled and it sees my Intel chipset but It does not show any decoding. Plex is also setup with Intel settings. Screenshots for comparison. So i am not sure why I am not seeing anything. I have tested and noting shows. Also plex is setup to do Hardware Transcoding also. Do you have the latest version of intel_gpu_top installed. Do you get dataif you run from cmdline? Edited March 18, 2023 by SimonF Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 5 minutes ago, SimonF said: Do you have the latest version of intel_gpu_top installed. Do you get dataif you run from cmdline? Yes GPU TOP is installed as I just upgraded the hardware this AM from AMD to Intel. Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 (edited) 25 minutes ago, CrazyBoyS said: Yes GPU TOP is installed as I just upgraded the hardware this AM from AMD to Intel. That looks fine, matches my 12600K. which OS are you on? can you provide cat /boot/config/plugins/gpustat/gpustat.cfg Edited March 18, 2023 by SimonF Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 6 minutes ago, SimonF said: That looks fine, matches my 12600K. which OS are you on? can you provide cat /boot/config/plugins/gpustat/gpustat.cfg Version 6.11.5 VENDOR="intel" GPUID="0000-00-000-000000" TEMPFORMAT="C" DISPCLOCKS="1" DISPENCDEC="0" DISPPCIUTIL="1" DISPTEMP="1" DISPFAN="1" DISPPWRDRAW="1" DISPPWRSTATE="1" DISPTHROTTLE="0" DISPSESSIONS="0" UIREFRESH="1" UIREFRESHINT="1000" DISPMEMUTIL="1" DISP3DRENDER="1" DISPBLITTER="1" DISPVIDEO="1" DISPVIDENH="1" DISPINTERRUPT="1" DISPEVENT="1" DISPVERTEX="1" DISPTEXTURE="1" DISPSHADEREXP="1" DISPSEQUENCER="1" DISPSHADERINTER="1" DISPSCANCON="1" DISPPRIMASSEM="1" DISPDEPTHBLK="1" DISPCOLORBLK="1" DISPGFXTRANS="1" Quote Link to comment
Squid Posted March 18, 2023 Share Posted March 18, 2023 While the plugin used to simply have the display aberrations with 6.12.0-rc1, under the next rev of the OS (currently private testing) having it installed will prevent the dashboard from even loading. It is now marked as being incompatible until such time as the author lets me know it has been fixed https://forums.unraid.net/bug-reports/prereleases/unraid-os-version-6120-rc1-available-r2297/page/4/?tab=comments#comment-22546 Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 18 minutes ago, CrazyBoyS said: Version 6.11.5 VENDOR="intel" GPUID="0000-00-000-000000" TEMPFORMAT="C" DISPCLOCKS="1" DISPENCDEC="0" DISPPCIUTIL="1" DISPTEMP="1" DISPFAN="1" DISPPWRDRAW="1" DISPPWRSTATE="1" DISPTHROTTLE="0" DISPSESSIONS="0" UIREFRESH="1" UIREFRESHINT="1000" DISPMEMUTIL="1" DISP3DRENDER="1" DISPBLITTER="1" DISPVIDEO="1" DISPVIDENH="1" DISPINTERRUPT="1" DISPEVENT="1" DISPVERTEX="1" DISPTEXTURE="1" DISPSHADEREXP="1" DISPSEQUENCER="1" DISPSHADERINTER="1" DISPSCANCON="1" DISPPRIMASSEM="1" DISPDEPTHBLK="1" DISPCOLORBLK="1" DISPGFXTRANS="1" What is the version of the plugin? Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 4 minutes ago, SimonF said: What is the version of the plugin? Newest one. 2022.11.30a Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 Just now, CrazyBoyS said: Newest one. 2022.11.30a Only thing I can suggest is to delete the .cfg and try again. Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 Just now, SimonF said: Only thing I can suggest is to delete the .cfg and try again. Where would I go to do that? Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 (edited) 3 minutes ago, CrazyBoyS said: Where would I go to do that? rm /boot/config/plugins/gpustat/gpustat.cfg Then just go into the config from settings. Edited March 18, 2023 by SimonF Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 1 hour ago, SimonF said: rm /boot/config/plugins/gpustat/gpustat.cfg Then just go into the config from settings. did all this and still the same issue. I just dont get it. Uninstalled GPU Statistics and rebooted server -> Reinstalled GPU Statistics and still same issue. Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 13 minutes ago, CrazyBoyS said: did all this and still the same issue. I just dont get it. Uninstalled GPU Statistics and rebooted server -> Reinstalled GPU Statistics and still same issue. Can you run and send the json output. I can then put it thou my new version to see if it works. I have created this PR to add 6.12 support and Multigpu, there is a test load in the PR if you want to try. Intel works a little different as I want to add support for ARC. https://github.com/b3rs3rk/gpustat-unraid/pull/52 root@computenode:~# timeout -k .500 .600 intel_gpu_top -J -s 250 -d drm:/dev/dri/card0 { "period": { "duration": 4.763089, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 24.936426, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/1": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } { "period": { "duration": 254.444122, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 5.622704, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/1": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } { "period": { "duration": 254.164899, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 7.393670, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/1": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 1 minute ago, SimonF said: Can you run and send the json output. I can then put it thou my new version to see if it works. I have created this PR to add 6.12 support and Multigpu, there is a test load in the PR if you want to try. Intel works a little different as I want to add support for ARC. https://github.com/b3rs3rk/gpustat-unraid/pull/52 root@computenode:~# timeout -k .500 .600 intel_gpu_top -J -s 250 -d drm:/dev/dri/card0 { "period": { "duration": 4.763089, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 24.936426, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/1": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } { "period": { "duration": 254.444122, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 5.622704, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/1": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } { "period": { "duration": 254.164899, "unit": "ms" }, "frequency": { "requested": 0.000000, "actual": 0.000000, "unit": "MHz" }, "interrupts": { "count": 0.000000, "unit": "irq/s" }, "rc6": { "value": 100.000000, "unit": "%" }, "power": { "GPU": 0.000000, "Package": 7.393670, "unit": "W" }, "engines": { "Render/3D/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Blitter/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "Video/1": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" }, "VideoEnhance/0": { "busy": 0.000000, "sema": 0.000000, "wait": 0.000000, "unit": "%" } }, "clients": { } } Will this work with my version as I am on the stable version and not rc 6.12? Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 Just now, CrazyBoyS said: Will this work with my version as I am on the stable version and not rc 6.12? Yes but will only be for single gpu I have test on 6.11 and 6.10 Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 1 minute ago, SimonF said: Yes but will only be for single gpu I have test on 6.11 and 6.10 Ok so how should I run this in the cmd line? Sorry plugins usually are install and go so little extra work. Sorry to be a newb. Also side note this always worked for my P400 until i swapped all my hardware today. NVidia just worked. I like the plugin have been using it since you released it officially. Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 1 minute ago, CrazyBoyS said: Ok so how should I run this in the cmd line? Sorry plugins usually are install and go so little extra work. Sorry to be a newb. Also side note this always worked for my P400 until i swapped all my hardware today. NVidia just worked. I like the plugin have been using it since you released it officially. Goto plugins then click on install plugin tab post this https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/gpustat.plg and then press install Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 12 minutes ago, SimonF said: Goto plugins then click on install plugin tab post this https://raw.githubusercontent.com/SimonFair/gpustat-unraid/master/gpustat.plg and then press install Thought so but wanted to make sure. SO a little change has shown after. I also see in the Intel settings I have GPU / Packages / Mix of Both as a option but its on GPU right now. Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 2 minutes ago, CrazyBoyS said: Thought so but wanted to make sure. SO a little change has shown after. I also see in the Intel settings I have GPU / Packages / Mix of Both as a option but its on GPU right now. There should be a file in /tmp called gpujson or gpujson2 can you cat and send me the ouput? i.e. cat /tmp/gpujson2 Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 4 minutes ago, SimonF said: There should be a file in /tmp called gpujson or gpujson2 can you cat and send me the ouput? i.e. cat /tmp/gpujson2 root@KiNG-KOOPA:/tmp# cat gpujson2 Time = Sat, 18 Mar 2023 18:41:43 -0400 {"clock":"N\/A","fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"N\/A","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"N\/A","tempmax":"N\/A","util":"N\/A","error":[{"code":301,"message":"Vendor command returned no data.","extra":""}]} Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 2 minutes ago, CrazyBoyS said: root@KiNG-KOOPA:/tmp# cat gpujson2 Time = Sat, 18 Mar 2023 18:41:43 -0400 {"clock":"N\/A","fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"N\/A","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"N\/A","tempmax":"N\/A","util":"N\/A","error":[{"code":301,"message":"Vendor command returned no data.","extra":""}]} run timeout -k .500 .600 intel_gpu_top -J -s 250 Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 7 minutes ago, SimonF said: run timeout -k .500 .600 intel_gpu_top -J -s 250 root@KiNG-KOOPA:/tmp# timeout -k .500 .600 intel_gpu_top -J -s 250 root@KiNG-KOOPA:/tmp# cat gpujson2 Time = Sat, 18 Mar 2023 18:52:38 -0400 {"clock":"N\/A","fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"N\/A","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"N\/A","tempmax":"N\/A","util":"N\/A","error":[{"code":301,"message":"Vendor command returned no data.","extra":""}]} Quote Link to comment
SimonF Posted March 18, 2023 Share Posted March 18, 2023 1 minute ago, CrazyBoyS said: root@KiNG-KOOPA:/tmp# timeout -k .500 .600 intel_gpu_top -J -s 250 root@KiNG-KOOPA:/tmp# cat gpujson2 Time = Sat, 18 Mar 2023 18:52:38 -0400 {"clock":"N\/A","fan":"N\/A","memclock":"N\/A","memutil":"N\/A","memused":"N\/A","power":"N\/A","powermax":"N\/A","rxutil":"N\/A","txutil":"N\/A","temp":"N\/A","tempmax":"N\/A","util":"N\/A","error":[{"code":301,"message":"Vendor command returned no data.","extra":""}]} ok the command intel_gpu-top -J should be outputting a long output but it is failing like mine a few posts above I will check tomorrow to see if there is an update to top with plugin creator. Quote Link to comment
CrazyBoyS Posted March 18, 2023 Share Posted March 18, 2023 1 minute ago, SimonF said: ok the command intel_gpu-top -J should be outputting a long output but it is failing like mine a few posts above I will check tomorrow to see if there is an update to top with plugin creator. Sounds good. Keep up the good work. Quote Link to comment
Juani Posted March 19, 2023 Share Posted March 19, 2023 1 hour ago, CrazyBoyS said: Sounds good. Keep up the good work. Hi, Same here. With one Core i5 13500. Not info displayed too. We hope the developer will update the plugin. Quote Link to comment
ich777 Posted March 19, 2023 Share Posted March 19, 2023 7 hours ago, CrazyBoyS said: Sounds good. Keep up the good work. 6 hours ago, Juani said: Same here. With one Core i5 13500. Not info displayed too. Please post your Diagnostics. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.