GuildDarts Posted February 25, 2021 Author Share Posted February 25, 2021 1 minute ago, ChillZwix said: @GuildDarts Got a problem, may be since last update. But I can't make new folders, can't edit folder. Got any idea? When you try and edit a folder does it load the folder settings on the edit page? Also when you try and save a folder do you get any errors in browser console? Quote Link to comment
ChillZwix Posted February 25, 2021 Share Posted February 25, 2021 2 minutes ago, GuildDarts said: When you try and edit a folder does it load the folder settings on the edit page? Also when you try and save a folder do you get any errors in browser console? It open like I will create a new folder, with all empty fields. Quote Link to comment
GuildDarts Posted February 25, 2021 Author Share Posted February 25, 2021 2 minutes ago, ChillZwix said: It open like I will create a new folder, with all empty fields. Just to make sure that i understand, you can't edit/create new folders but the ones you do have are still showing up? Do you use folders for both docker and vm or just one of them? Quote Link to comment
ChillZwix Posted February 26, 2021 Share Posted February 26, 2021 (edited) 39 minutes ago, GuildDarts said: Just to make sure that i understand, you can't edit/create new folders but the ones you do have are still showing up? Do you use folders for both docker and vm or just one of them? 1. correct 2. just docker Edited February 26, 2021 by ChillZwix Quote Link to comment
GuildDarts Posted February 26, 2021 Author Share Posted February 26, 2021 8 minutes ago, ChillZwix said: 1. correct 2. just docker Could you try and edit a folder then press f12 to open the browser console, then refresh the page and see if any errors appear If you dont get any errors could you then export all your folders and attach them to your next post (there is a button in the top right when eddting a folder) if the export does not work then the file is '/boot/config/plugins/docker.folder/folders.json' Quote Link to comment
ChillZwix Posted February 26, 2021 Share Posted February 26, 2021 23 minutes ago, GuildDarts said: Could you try and edit a folder then press f12 to open the browser console, then refresh the page and see if any errors appear If you dont get any errors could you then export all your folders and attach them to your next post (there is a button in the top right when eddting a folder) if the export does not work then the file is '/boot/config/plugins/docker.folder/folders.json' This did show up at refresh: Uncaught (in promise) TypeError: folderChild is not iterable at HTMLInputElement.<anonymous> (UpdateFolder?type=docker&folderId=545f0cc:2880) at Function.each (dynamix.js?v=1583697979:4) at n.fn.init.each (dynamix.js?v=1583697979:4) at init (UpdateFolder?type=docker&folderId=545f0cc:2877) (anonymous) @ UpdateFolder?type=docker&folderId=545f0cc:2880 each @ dynamix.js?v=1583697979:4 each @ dynamix.js?v=1583697979:4 init @ UpdateFolder?type=docker&folderId=545f0cc:2877 async function (async) init @ UpdateFolder?type=docker&folderId=545f0cc:2873 (anonymous) @ UpdateFolder?type=docker&folderId=545f0cc:2870 Quote Link to comment
GuildDarts Posted February 26, 2021 Author Share Posted February 26, 2021 (edited) 13 minutes ago, ChillZwix said: This did show up at refresh: Uncaught (in promise) TypeError: folderChild is not iterable at HTMLInputElement.<anonymous> (UpdateFolder?type=docker&folderId=545f0cc:2880) at Function.each (dynamix.js?v=1583697979:4) at n.fn.init.each (dynamix.js?v=1583697979:4) at init (UpdateFolder?type=docker&folderId=545f0cc:2877) (anonymous) @ UpdateFolder?type=docker&folderId=545f0cc:2880 each @ dynamix.js?v=1583697979:4 each @ dynamix.js?v=1583697979:4 init @ UpdateFolder?type=docker&folderId=545f0cc:2877 async function (async) init @ UpdateFolder?type=docker&folderId=545f0cc:2873 (anonymous) @ UpdateFolder?type=docker&folderId=545f0cc:2870 Could you export your folders, and attach them to your next post or if you want you can edit the export and see if you can find the "children" that is no longer an array and fix it (might be more than one) i'm a bit unsure how this happened, how long since you last edited a folder and it worked? Edited February 26, 2021 by GuildDarts Quote Link to comment
ChillZwix Posted February 26, 2021 Share Posted February 26, 2021 29 minutes ago, GuildDarts said: Could you export your folders, and attach them to your next post or if you want you can edit the export and see if you can find the "children" that is no longer an array and fix it (might be more than one) i'm a bit unsure how this happened, how long since you last edited a folder and it worked? Correct? folders.backup.json folders.json Quote Link to comment
GuildDarts Posted February 26, 2021 Author Share Posted February 26, 2021 3 minutes ago, ChillZwix said: Correct? folders.backup.json 515.99 kB · 0 downloads folders.json 527.76 kB · 1 download looks like a folder called 'System' maybe failed to migrate at some point I removed it from the folders.json you can either do that on yours or download the attached one and replace your current hope this fixes it folders.json 1 Quote Link to comment
ChillZwix Posted February 26, 2021 Share Posted February 26, 2021 11 hours ago, GuildDarts said: looks like a folder called 'System' maybe failed to migrate at some point I removed it from the folders.json you can either do that on yours or download the attached one and replace your current hope this fixes it folders.json 527.71 kB · 0 downloads @GuildDartsThank you so much for help! Now everything works! Quote Link to comment
NickI Posted February 28, 2021 Share Posted February 28, 2021 Hello everyone! i am having an issue with the plugin (fresh install) After install, went into the plugins/Docker Folder to config and i got the below error Warning: require_once(/usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.folder-.php): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.php on line 12 Fatal error: require_once(): Failed opening required '/usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.folder-.php' (include_path='.:/usr/local/emhttp') in /usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.php on line 12 seeing the error i noticed the add-update.folder-.php name of the file and decided to dig into it a bit more it seems that the add-update.php has two lines that probably not working as expected to my unraid Line 01: $folderType = $_GET['type']; Line 12: require_once("$docroot/plugins/docker.folder/include/add-update.folder/add-update.folder-$folderType.php"); Any help or hint on what might went wrong would be very much appreciated. Quote Link to comment
GuildDarts Posted February 28, 2021 Author Share Posted February 28, 2021 22 minutes ago, NickI said: Hello everyone! i am having an issue with the plugin (fresh install) After install, went into the plugins/Docker Folder to config and i got the below error Warning: require_once(/usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.folder-.php): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.php on line 12 Fatal error: require_once(): Failed opening required '/usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.folder-.php' (include_path='.:/usr/local/emhttp') in /usr/local/emhttp/plugins/docker.folder/include/add-update.folder/add-update.php on line 12 seeing the error i noticed the add-update.folder-.php name of the file and decided to dig into it a bit more it seems that the add-update.php has two lines that probably not working as expected to my unraid Line 01: $folderType = $_GET['type']; Line 12: require_once("$docroot/plugins/docker.folder/include/add-update.folder/add-update.folder-$folderType.php"); Any help or hint on what might went wrong would be very much appreciated. The way you are meant to configure/add folders is under the docker/vm page so goto e.g the docker page then at the bottom there is a add folder button (same for vm) i can see how this might be confusing as every other plugin you can just goto plugins/plugin name 1 Quote Link to comment
NickI Posted February 28, 2021 Share Posted February 28, 2021 11 minutes ago, GuildDarts said: The way you are meant to configure/add folders is under the docker/vm page so goto e.g the docker page then at the bottom there is a add folder button (same for vm) i can see how this might be confusing as every other plugin you can just goto plugins/plugin name GuildDarts thank you so much for the swift reply and the great work you've done! Works like a charm now. By the way, the plugins settings page still shows the same error. Is that expected? Quote Link to comment
GuildDarts Posted February 28, 2021 Author Share Posted February 28, 2021 Just now, NickI said: GuildDarts thank you so much for the swift reply and the great work you've done! Works like a charm now. By the way, the plugins settings page still shows the same error. Is that expected? No it's not expected, think it broke when i added support for vm folders Will fix it, when i have time but as i does not break anything might be soon TM 1 Quote Link to comment
GuildDarts Posted March 4, 2021 Author Share Posted March 4, 2021 2 hours ago, Alex.b said: I updated to the last version but drag seems doesn't work. what version of unraid are you on? Quote Link to comment
GeneM Posted March 5, 2021 Share Posted March 5, 2021 Also trying to rearrange the folders and dockers to manage start-up. unRAID: 6.9.0 2021-02-27 Docker Folder Plugin: 2021.03.03 Not seeing anything in the Chrome browser console. Same symptom w/Firefox Thank you... Quote Link to comment
GuildDarts Posted March 5, 2021 Author Share Posted March 5, 2021 @GeneM @Alex.b In unraid 6.9.0 you have to drag via the new icon on the far right This also caught me off guard at first Quote Link to comment
GeneM Posted March 6, 2021 Share Posted March 6, 2021 😆Oh, man. Sorry for spinning this up. If I missed a release-note or documentation(?) change, please advise. But, thank you. Quote Link to comment
kennymc.c Posted March 7, 2021 Share Posted March 7, 2021 Has the Log button also disappeared with the 6.9 update? This is now only possible via the context menu. In the folder settings there is also no possibility for it. Quote Link to comment
GuildDarts Posted March 7, 2021 Author Share Posted March 7, 2021 (edited) 37 minutes ago, kennymc.c said: Has the Log button also disappeared with the 6.9 update? This is now only possible via the context menu. In the folder settings there is also no possibility for it. Yeah i think it has, tho thats a default unraid change edit: realised that you might have meant the preview log button, as that was broke. (should be fixed now ) Edited March 7, 2021 by GuildDarts maybe issue fixed Quote Link to comment
kennymc.c Posted March 7, 2021 Share Posted March 7, 2021 (edited) Updated to 2021.03.07 but the preview log button is still missing. Re-install did not help either. Edited March 7, 2021 by kennymc.c Quote Link to comment
GuildDarts Posted March 7, 2021 Author Share Posted March 7, 2021 33 minutes ago, kennymc.c said: Updated to 2021.03.07 but the preview log button is still missing. Re-install did not help either. You are talking about the preview log button right? or are you talking about the one that used to be next to uptime? you wanna make sure we are on the same page Quote Link to comment
kennymc.c Posted March 7, 2021 Share Posted March 7, 2021 Just realized, that the preview log button and also the Webgui buttons are actually there but I cloud't see them because I use a dark theme. So the problem is more the transparent background, which did not exist before. Quote Link to comment
GuildDarts Posted March 7, 2021 Author Share Posted March 7, 2021 1 minute ago, kennymc.c said: Just realized, that the preview log button and also the Webgui buttons are actually there but I cloud't see them because I use a dark theme. So the problem is more the transparent background, which did not exist before. Yeah just tried the dark theme and it hella hard to see them. Will see if i can make dark theme support better. For now you can use something like theme engine plugin and add cutom stying to the dark theme Quote Link to comment
kennymc.c Posted March 7, 2021 Share Posted March 7, 2021 I already use the theme engine plugin but the dark grey and black background colors seems to be hard coded to the black base theme. So I will wait for a fix then. Quote Link to comment
Recommended Posts
Posted by scolcipitato,
Docker Folder is going away, this is the replacement
Recommended by JonathanM
4 reactions
Go to this post
Posted by Squid,
9 reactions
Go to this post
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.