Fuggin

Members
 View Profile  See their activity

  • Posts

    273

  • Joined

  • Last visited

 Content Type 

Everything posted by Fuggin

  1. Fuggin
    I will retry in safe mode. Just so you are aware, this didn't occur for several days after the update to rc5. With rc4 it was immediate. The only plugins/changes I did after the update to rc5 was adding the nvidia driver and gpu statistics plugin.
  2. Fuggin
    This is occurring with RC5. golem-diagnostics-20220428-0923.zip
  3. Fuggin
    Changed Priority to Urgent
  4. Fuggin
    That did the trick! Thanks for the quick fix!
  5. Fuggin
    Towards the end of boot sequence. I don't get any other errors otherwise.
  6. Fuggin
    I have noticed this using the RC versions. Otherwise SAS Spin Down works fine. Using all SAS drives connected through a SAS3008 HBA and Supermicro 836 backplane.
  7. Fuggin
    Ok...I thought I was able to move items from column to column. Either way, rc5 seems to have fixed the position retention within the columns. Glad BRiT thought it was funny.
  8. Fuggin
    If it matters, I get the same error as the OP with no VMs running.
  9. Fuggin
    The ability to drag widgets from column to column stopped working for me from RC2 and on. When I do make a change in a column, it doesn't retain position when you leave the Dashboard page and return. Request - a pin/unpin feature for widgets.
  10. Fuggin
    Now
  11. Fuggin
    Disregard...I am an idiot. Everything works now.
  12. Fuggin
    Hello...installed an Nvidia GT 710 GPU and used the 470.103.01 driver that claims is the latest linux driver that supports that GPU. Plugin still does not detect card. Running. 6.10.0.-rc2. Don't know if I need to be running rc4 to work? Please advise.
  13. Fuggin
    NVM....need to enable disks AND Historical to see them....fine by me.
  14. Fuggin
    Latest update fixed it...but the historical disks don't show now when switching it on...I don't know if the update just cleared the history altogether.
  15. Fuggin
    Historical disks keep appearing on the main tab. Turning on/off the historical devices does nothing.
  16. Fuggin
    root@Golem:~# lspci -vvs 03:00.0 | grep Lnk pcilib: sysfs_read_vpd: read failed: Input/output error LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Exit Latency L0s <64ns LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ LnkSta: Speed 5GT/s (ok), Width x4 (downgraded) LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase
  17. Fuggin
    I just realized that my BIOS isn't as current as yours. Need to fix that.
  18. Fuggin
    Hello...please help. My brain is mush. Motherboard: Supermicro X9DRL-iF HBA: PCIe x8 LSI 9211-8i (IT mode) (inserted into Slot 6, closest to the CPU) In Unraid DiskSpeed Container, it shows the controller is set at 4x link speed: Here's my BIOS settings: Do I have my settings correct? Documentation on the HBA says it is a PCIe 2.0 x8 card...so why can't it connect at x8? Then the other odd thing is that my HBA is a SAS2 controller. Why is unraid loading SAS3 drivers? Please advise.
  19. Fuggin
    RC4. Had a fun one today. I had a kernel panic last night and was doing a memtest. After testing was complete, I booted and then started the array. My array was spun down when the kernel panic occur, so my intent was to cancel the parity check once the array started. Then this happened (in Firefox): Parity check, while stopped? Disks (supposedly) unmounted, parity running... Containers running, but array (supposedly) stopped, while doing a parity check... So...before I go any further, I have noticed that rc4 seems to affect browser refresh...when I make changes on the main tab, it just doesn't refresh consistently. Anyways...I exited the browser and went back into unraid and it was still doing this. I even tried Chrome, same thing. I ended up having to enter powerdown -r in terminal. Powerdown went smooth then rebooted. Once back in, I went to Tools and restored rc2, rebooted again. System came up just fine. Config was valid, I started the Array and everything was fine. Attached rc4 diagnostics before I power down the first time. golem-diagnostics-20220401-1602.zip
  20. Fuggin
    https://www.ebay.com/sch/simo3394/m.html?_nkw=&_armrs=1&_ipg=&_from= Check on the page for more stuff being added throughout the week. (Ignore the knives...selling for a friend) Added more items to ebay site. Adding more used mini-tower/htpc cases during the week. Adding Artic fans/heatsinks during the week.
  21. Fuggin
    You had to do this during a parity sync.....😭
  22. Fuggin
    If I wanted to update my topo diagram...how would I go doing so? I made some changes but get an error from doing a topo a while ago. ln -s /lib64/libudev.so.1 /lib64/libudev.so.0 ln: failed to create symbolic link '/lib64/libudev.so.0': File exists So which file do I delete to generate the new topo?
  23. Fuggin
    Makes sense...thank you!
  24. Fuggin
    Quick question on this...great guide btw... I have read these are the steps one should follow. It mentions to flash the mpt3x64.rom and the controller address as well... sas3flash -list sas3flash -o -e 7 sas3flash -f SAS9300XXX_IT.bin -b mptsas3.rom -b mpt3x64.rom sas3flash -o -sasadd 50060XXXXXXXXXXXX Can you confirm if these need to be done?
  25. Fuggin
    My own fault, but I forgot to stop unbalance when shutting down the server. Now I have to wait for the entire rsync process for a particular folder of shows to finish moving before it unmounts the drives. I thought stopping unbalance would stop after finishing a single file transfer but it doesn't. It only stops when the whole folder is moved. I am assuming this is normal plugin behavior?