Walter S

I'm trying to cleanup my "movie" folders on my share and when I browse into the share to look for more than one location per folder Unraid goes unresponsive. This has worked in the past. Any ideas? This could be a bug.

I forgot to mention, my PSU is modular and all the 6 pin SATS power outputs are all taken. That's why I came across those 8 pin to 6 pin adapters. I do have open PCIe 8 pin outputs and wondered if that might be an option. I'm just concerned the pin assignment (on the PCIe) might not be what I need. I don't want to short anything out. the punch-down idea might be an option thanks Michael_P. I just don't want to put too many HDD on one line.

I could use a suggestion/advice, I have two StartechUSA trayless 3X5 HDD modules, each 5 HDD unit is powered by 2 SATA inputs. I have a Seasonic Gold 850W single rail power supply. I also have 2 single StartechUSA units for each of my parity drives, along with 3 SSD's inside my Antec 1200 case. I would like to power the 3X5's modules with two separate cables from the PSU instead of using one line. The problem I'm seeing is I don't have enough SATA outputs on the PSU. I'm wondering about SATA splitters or using the PCIe 8 pin to 6 pin adapters I have listed below, and run SATA power from them to the module or to a single HDD as required. Any thoughts would be appreciated.. https://www.amazon.com/dp/B01DV1Z32Y?starsLeft=1&ref_=cm_sw_r_cso_em_apin_dp_SK62JH351KREWD0Y9ZYA Amazon.com_ Cable Matters 2-Pack 6 Pin to 8 Pin PCIe Adapter Power Cable - 4 Inches _ Electronics.html

Yes CRC errors are usually bad cabling if I remember correctly. I unchecked that error box. Notifications via email is a pain in the butt to setup I tried and I could't get to work so I have only browser alerts, which is fine cause I'm on the computer most of the day.

interesting, no, all my disks show healthy. I'll keep a close eye on SMART reports. I have only got a unhealthy 👎 notice when a disks goes disabled, by than yeah, I know I have a problem. I never gave much thought otherwise to the SMART reports.

I have 11 hard drives in my array with 2 parity drives and a cache pool with SSD's. I have a large video collection, Family pictures and so on. I was wondering, is there a "rule of thumb" on how long Unraid folks keep their HDD's in use. I have been using Unraid for roughly 10 years, and only replace a disk when they go disables more than once. This just happened the other day. I replaced the data disk and in the process one of the parity disks started acting stupid. Just wondering. do you pull it when the warranty runs out? which seems like a waste. or do you pull it like after five years or whatever.. Ever time I have to replace a disk (which isn't often) my Wife throws a fit. lol.

Thank you Sir.. And tank's to all the Unraid staff..

I have 1 data disk that went disabled ( I copied the contents), I'm now pre-clearing (at approx 20% done) a fresh disk to replace it. Not a problem, I've done this before. However, one of my 2 parity disks went disabled with read errors (?) I know the procedure to rebuild a disk onto itself, my question is whats the best and safest strategy here? Should I deal with rebuilding on to itself the disabled parity disk first? and than deal with the pre-cleared data disk? I'm thinking so, because 1. I have a copy of the contents from the data disk. and 2. if the other parity disk get stupid on me I may have a bigger problem to deal with. Any thoughts would be appreciated. Thanks in advance.. server-diagnostics-20240221-2024.zip

6.12.5 to 6.12.6 completed without incident. Apricate the great work. Happy Holidays

Nice plugin, I was wondering where are the snap shot stored? are they stored next to the files themself? Is there an option for saving them elsewhere?

Mine seems to work as expected. Great job, Thanks.

I've updated to UR 6.12.1 added back Disk location but it seems to crash the Dashboard unless all drives are spun-up, then it comes back. Same things happens after updating to 6.12.2. Only works when all drives are spun-up

I'm running one unraid server, I have a second license key as a backup. My question is which files other than the Key file in the config folder do I need to backup? Or do I just need to copy everything (other than the Key file in the config folder) In case the usb fails.

Haha that's for sure.. Welcome Eli

All seems fine now.. Good work

Same thing here..

For some reason my Tdarr app and node got knocked off when I updated to Unraid Version: 6.10.0-rc4 (I think). I haven't used it lately it seem to have disappeared. Any one else noticed this? It shows up under Previous installed apps but it fails to install properly.

Hi all, I just updated to the latest Unraid rc3 and I noticed this error. I don't like to mess with a good think, so I proceed with caution with my beloved media server. I received this error via Fix Common Problems, and I'm not sure how to correct it (if necessary) any further explanation/help would be appreciated. Thanks.. server-diagnostics-20220311-1219.zip

I don't know why this got marked Solved? Cause it's NOT!! Gonna sit tight...

I'm having the same problem. (6.10.0-rc2) It seems to have just started. My system has been running without issues until I noticed the sign-in/out issue in the last day or two. I tried turning off my VPN but it didn't seem to have any effect. I going to Not do anything drastic or make any changes at this point. Seems like its at the Unraid server side.

This seems to work nicely with a bit of tinkering. I noticed when using the usb id for my usb connected HP P2035n I found during a server restart or printer restart the usb id changes. Seeing this is a network printer, I tinkered a bit more and finally was able to get it to work successfully without the usb connection. Great work Jose finally we can AirPrint now with CUPS

I noticed the same problem. I hope there's a fix

Thanks for the tip, It worked like a charm.. TY JonathanM

O, I have to look at that. Thanks JonathanM

Is there such a thing?..I run Urbackup and even though I set it to back up only one day a week it keeps my parity and designated data disk from sleeping (always spun-up). This seems like a worthwhile app. I couldn't find anything that might fit the bill. maybe somebody could create it..