Paul_Ber

I still don't see what I am doing wrong. Do I screenshot my edit screen? Blanking sensitive info?

Here is part of the logs:

I see these 2 addresses in the logs. I deleted the port forward at Airvpn and requested a new one, updated Deluge incoming port then the download started then speed went lower until it stopped.

When you generate the openvpn config at Airvpn it selects 443 but is that different than the forwarded port? On Airvpn I already had the forwarded port setup from before. I put the port in Deluge. Not downloading on a test Ubuntu torrent. This is from Airvpn forwarded ports page.

Ok like said I am running this Docker but I don't understand the port Forwarding? I am with Airvpn, welll ar least until March.

@binhex I might stop trying keep up with your Docker on my Docker DelugeVPN-flexget, getting too complicated for my programming skills. I got it updated but I think because I am using Airvpn the forwarding on 443 is not working. My cache pool on 5yr old SSDs got hooped and I had to buy new SSDs and start over. https://github.com/paulpoco/arch-delugevpn/tree/dev I see now you can assign one Docker to use another's Internet connection(at least I saw that in SpaceInvaders YouTube). I.e. I'll update my Flexget only Docker and install it and assign it the DelugeVPN internet connection. Will the Flexget be able to send the Deluge torrent to the DelugeVPN Docker. I installed your Docker and it works right away. Maybe I need to take your current one and start over, my Flexget stuff was kind of easy to add. Well another night then.

@StevenD Thanks

From someone else's post but I don't see "GPU" in Dashboard like this: The HW transcoding in PLEX works just fine.

Weird Unraid USB Flash drive(Unraid 6.9 RC2) not seen unless I move it to a port on its own. This happened after I changed Video card from GT240 to GTX 1660 Super. MB is ASUS M5A97 R2.0. Originally the Unraid flash drive(is a USB 3.0 stick) was plugged into 1 of 2 USB 3.0 ports on the rear of MB. The other thing plugged into 2 of 2 USB 3.0 ports was the UPS. So tried putting the Unraid USB Flash drive on the front 1 of 2 USB 3.0 ports that already had a Logitech receiver. Bios saw the Unraid USB Flash drive but the keyboard wouldn't work. Moved the UPS USB to USB 2.0 port and put Unraid USB Flash drive back on rear USB 3.0 port, no go BIOS doesn't see it. Put Logitech receiver USB on rear USB 2.0 port and put Unraid USB Flash drive on front USB 3.0 by itself, this works. Weird?? Not a Unraid 6.9 RC2 issue but a MB BIOS issue.

@ich777 dumb question I saw a video on YouTube that showed a GPU section in the Dashboard or is that only once you setup your PLEX to use the Nvidia? I have only followed the instructions up to the point before would follow the instructions for PLEX.

Thanks for doing the plugin and instructions.

I am a little confused about the Plex Nvidia Transcoding? Am I supposed to use these instructions? Or is there something from Linetech?

Has anyone had any issues with the bleeding edge feature for Plex-Pass features? I haven't noticed any but I guess you won't know until it happens. So the best way to switch from Binhex-plexpass to Binhex-plex is use the method @SpaceInvaderOne YouTube video shows? @binhex too bad you couldn't merge the 2 versions and just have a setting in the edit settings screen to switch between binhex-plexpass and binhex-plex?

Upgraded from 6.8.3 to 6.9 RC2 in prep for Nvidia PLEX hardware transcode GTX 1660 Super, so far seems ok and everything is working as expected.

How does Unraid control Video Card fan speed/temps?

I think it is that easy. I think i am using that UPS, it just works , I set it up years ago.

Use 16x slot(16x) & 16x slot(4x) video card and LSI 9211-8i? Have a LSI 9211-8i that is 8x PCIe 2.0 card. Picking up a GTX 1660 Super for Plex transcoding. I was going put the GTX 1660 in the 1st 16x physical slot that works at 16x And put the LSI 9211-8i in the 2nd 16x physical slot that works at 4x. This part is weird as other boards will work differently and a video card in each of the 2 slots would make the 1st slot go down to 8x(when card in each slot) and the 2nd slot would be 8x. Is this what I should do or do it the other way around? I have the bios boot off a PCI ATI 7000 video card for the unraid gui. This in the past was so I could use the main PCIe 2.0 16x slot video card for a VM I don't use anymore. Now I have tried the video card in the 2nd 16x(4x) before and I think the MB didn't like that. ASUS MB M5A97 R2.0, yes the MB manual says 2012 but it works and has 4 x 8GB DDR3 1600 ECC ram. I am only going to have 7 spinning disks on the LSI 9211-8i with 2 8087 cables.

I cannot remember when but one September or fall time, PLEX offered Lifetime Pass for $29. I gave my money right away. That was many years ago

Re up this one. On a test Unraid I had to pull the video card and go with on board HDMI and this has a really low resolution too. And "control plus minus" never gets small enough without text getting too tiny.

Yes this feature would be great. I had it working 10 years ago in a XBMC Linux system but I don't really understand how to do it for Unraid.

Too bad. You would think because the new data disks are zeroed it could add them and not allow any writes on the new disks until the parity 2 was done writing? So guess if you wanted the additional space you would add the new data disks then after that add parity 2.

Right now have 1 Parity(8TB) & 3 Data(6TB,3TB,3TB) disks. About to add a 8TB, 6TB, 5TB disks when my LSI 9211-8i arrives. If I make that new 8TB a 2nd Parity disk can I add the other 2 drives at the same time? They are all precleared 3 times.

I think I will stick with my Fractal Design Arc Midi R2 case. No hot swap but room for 8 3.5" drives and 2 5.25" bays. And with fans stays fairly cool. Waiting for a LSI 9211-8i card to arrive. Got a 5.25" bay 6 x 2.5" SSD cage. Then add WD80EFAX 8TB, rma'd WD60EFRX 6TB, and an older WD50EFRX 5TB drives.

Corsair says right on their website type 3 and type cable are the same for everything except for 24pin and cpu power.

The Preclear plug-in status display flashes off and on , on the Unraid main screen in UD listing.