wirenut

i received unraid notification email of an update to the container from overnight. container auto update enabled in unraid. now i cannot connect from phone app or work computer. log just keeps repeating TLS Error: cannot locate HMAC in incoming packet from [AF_INET]XX.XXX.XXX.XXX:1194 I tried restarting container, did not change. Is there something I need to change on my end as a result of the container update?

thanks fo rthe replies, better safe than sorry. I'll kick one off before retiring for the night.

I replaced a 2tb drive with a 4tb drive. rebuild successful. it has been some time for me in having to perform this procedure. I recall in the past after a successful rebuild, parity would show as "valid but not checked yet" or similar and then it was recommended to run parity check to verify success. I currently see in gui parity is valid and Last check completed on Tue 05 Sep 2017 05:48:04 AM CDT (today), finding 0 errors. Is it no longer necessary to run a parity check after a disc rebuild with version 6.3.5 and dual parity when replacing and rebuilding a disc? thanks.

update to 6.3.5 yesterday, fix common problems finds call trace error in weekly scan this morning. Is this a fluke or something to worry about? tower-diagnostics-20170528-0827.zip

Without knowing any other details for your setup, and using my rule of thumb that true sine with AVR is always better, I vote for the CyberPower, CP850PFCLCD For the money, this series is a very good buy. Also check amazon as some times you can save a couple bucks over newegg. Enjoy. Sent from my HTC One M9 using Tapatalk

I'm experimenting with this docker after experiencing some speed issues with delugevpn as others have mentioned. Until I figure it out and am comfortable using this docker I would like to run both at the same time with pia vpn enabled but trying to start one or the other at the same time results in an "internal server error" pop up and does not start. Can this be done or do I possibly have some other issue preventing this? Sent from my HTC One M9 using Tapatalk

I'm using siphon v 0.73.6 Sent from my HTC One M9 using Tapatalk

I can check when I get back to computer in a few hours... Sent from my HTC One M9 using Tapatalk

Deluge made some security changes in this version. Other apps should be updating soon to account for that. I don't use the two you mentioned, but I do use the extension in chrome and it does now work for me. Sent from my HTC One M9 using Tapatalk

You need to set VPN_REMOTE with a server that supports port forwarding. The one you have set from Texas does not. None of the US server do. Check the list on the PIA website. Sent from my HTC One M9 using Tapatalk

after updating earlier today, my docker log is filling up with this: 2017-02-28 19:52:43,284 DEBG 'deluge-web-script' stderr output:Unhandled error in Deferred:2017-02-28 19:52:43,284 DEBG 'deluge-web-script' stderr output:2017-02-28 19:52:51,277 DEBG 'deluge-web-script' stderr output:Unhandled error in Deferred:2017-02-28 19:52:51,277 DEBG 'deluge-web-script' stderr output:2017-02-28 19:52:55,358 DEBG 'deluge-web-script' stderr output:Unhandled error in Deferred:2017-02-28 19:52:55,373 DEBG 'deluge-web-script' stderr output:Unhandled error in Deferred:2017-02-28 19:52:55,418 DEBG 'deluge-web-script' stderr output:Unhandled error in Deferred:

same for me also.

I think he means the movies not being in their own subfolder. Yes, that's what I'm asking. I heard this was going to change in an update. Guess it hasn't yet. I also hope this change comes. Sooner than later... Sent from my HTC One M9 using Tapatalk

So, after updating, is there anything different to do on my end or just start container and go, as before? Sent from my HTC One M9 using Tapatalk

The MyMain display isn't matched by anything in v6 ... that's probably the one feature that many folks miss from UnMenu. Agree, however, that UnMenu is simply not required with v6. +1 Sent from my HTC One M9 using Tapatalk

I believe the docker version is now depreciated. Look for and install the plugin version. Sent from my HTC One M9 using Tapatalk

correcting run and errors were indeed corrected. second run to verify confirmed no errors.

Just curious if it is acceptable to stop parity che k once (if) sync errors are corrected, then start a fresh check to verify? Or is it more beneficial to complete, then recheck? Sent from my HTC One M9 using Tapatalk

monthly check completed with four sync errors found. From Log: Nov 1 00:00:01 Tower kernel: mdcmd (263): check NOCORRECT Nov 1 00:00:01 Tower kernel: md: recovery thread: check P Q ... Nov 1 00:00:01 Tower kernel: md: using 1536k window, over a total of 3907018532 blocks. Nov 1 00:00:10 Tower kernel: md: recovery thread: PQ incorrect, sector=0 Nov 1 07:09:38 Tower kernel: md: recovery thread: PQ incorrect, sector=3907050624 Nov 1 07:09:39 Tower kernel: md: recovery thread: PQ incorrect, sector=3907122776 Nov 1 07:09:39 Tower kernel: md: recovery thread: PQ incorrect, sector=3907261496 Nov 1 13:26:27 Tower kernel: md: sync done. time=48386sec Nov 1 13:26:27 Tower kernel: md: recovery thread: completion status: 0 After searching around the forum and reading what I could find I have concluded all I can do is run another check, but with option to CORRECT parity enabled. Just wanted to check with the forum experts before proceeding. Thank You.

Are you using the cache directories plugin? It may help you in this situation. Sent from my HTC One M9 using Tapatalk

update: still experiencing this situation. i've found that if i leave the browser window open until the rebooting webpage is displayed all boot up fine. if i close the browser before this page is displayed the situation occurs. consistent for me with FF and chrome. Any ideas?

little glitch after upgrading to 6.2 have array set to auto start but it does not after a reboot. also not capturing current log to flash drive on shutdown. attached diagnostics run from tool menu after starting array. I had the depreciated powerdown plugin installed on 6.1.9 which i uninstalled prior to upgrading to 6.2 if that means anything useful. i also use the dnyamix button from the dashboard to initiate the reboot. If i've done something, help shed light on it so i can reverse it. thanks. tower-diagnostics-20160923-1640.zip

Docker is updated in 6.2. After I upgraded to 6.2 I went to the docker tab and pressed the update all button. All is well now. I hope that works for you too. Sent from my HTC One M9 using Tapatalk

+1 Sent from my HTC One M9 using Tapatalk