KluthR Posted June 23, 2023 Author Share Posted June 23, 2023 22 hours ago, Aman Saroha said: Getting this error at the end while trying to backup Need debug log. Either PM it or attach it. Quote Link to comment
TheOgre Posted June 23, 2023 Share Posted June 23, 2023 (edited) So one issue I am running into is exclusions, I got the exclusions for each docker container figured out, but one big issue for me is the exclusion of the /.Recycle Bin/ folder from the Recycle Bin plugin. I find this plugin necessary for accidental deletion of files/folders and had it excluded in the old CA backup. I see under each docker container configuration there is an exclusion list and I can select basically any folder on the system from there, but will that actually propagate to the main backup? Seems a bit confusing as is. Any advice would be appreciated, thanks! Edited June 23, 2023 by TheOgre Quote Link to comment
KluthR Posted June 23, 2023 Author Share Posted June 23, 2023 What do you mean with „Main backup“? where is this Recycle Bin folder located? If this works alongside with docker and is just a folder which is not used in any container then its not a part from the backup. The plugin does not just backup the appdata folders. It backups folders in use by containers. Quote Link to comment
jcofer555 Posted June 24, 2023 Share Posted June 24, 2023 how do i backup the actual appdata like the old plugin? when i do a backup all i get is the .xml files 1 Quote Link to comment
KluthR Posted June 24, 2023 Author Share Posted June 24, 2023 29 minutes ago, jcofer555 said: how do i backup the actual appdata like the old plugin? Not at all anymore. All needed data is collected from each containers volume mapping. Therefore you need to check the appdata source setting and notice the help block inside it. Quote Link to comment
jcofer555 Posted June 24, 2023 Share Posted June 24, 2023 34 minutes ago, KluthR said: Not at all anymore. All needed data is collected from each containers volume mapping. Therefore you need to check the appdata source setting and notice the help block inside it. i see, so much extra effort than before but thank you for the response Quote Link to comment
enJOyIT Posted June 24, 2023 Share Posted June 24, 2023 I upgraded from 6.12.0 to 6.12.1 and switched my cache pools from btrfs to zfs and changed docker.img to directory. Are there any issues regarding zfs and using this plugin? I now had two times a kernel panic which killed my entire unraid system (--> needed a hard reset of the system). I don't shutdown any docker before backup, is this maybe connected to this (but an error shouldn't kill the unraid host)? I don't have log files because i wasn't able to get them after it happend. But it was something like "unraid kernel panic not syncing" and zfs was mentioned elsewhere in the console tab (its a VM inside a proxmox host). I never had such massive problems before and now I'm afraid that there is a major issue which causes this. I disabled the plugin to observe the behaviour now. Quote Link to comment
KluthR Posted June 24, 2023 Author Share Posted June 24, 2023 30 minutes ago, enJOyIT said: Are there any issues regarding zfs and using this plugin? I dont think so because the plugin works on top of the filesystem layer. Quote Link to comment
Renegade605 Posted June 24, 2023 Share Posted June 24, 2023 6 hours ago, enJOyIT said: Are there any issues regarding zfs and using this plugin? I now had two times a kernel panic which killed my entire unraid system (--> needed a hard reset of the system). I've had ZFS related kernel panics on 6.12 as well during heavy filesystem operation. The frequency went down drastically when I changed docker from macvlan to ipvlan mode. I did get a lock up just recently but I haven't had a chance to debug it yet as my ISP is trying to fix their internet and I just got back from out of town. I'll be posting updates here when I get to them: https://forums.unraid.net/bug-reports/stable-releases/zfs-related-kernel-panic-r2458/ 1 Quote Link to comment
Fribb Posted June 25, 2023 Share Posted June 25, 2023 I would like to make a suggestion. While I like the "container by container" approach of doing the backups to reduce the time a container isn't available, in some instances this could also be a problem. For example, stopping the database of a service will potentially break the service accessing that database. A more specific example, I have a Tautulli container which can monitor the Plex logs which are acessible through a volume mapping to the Plex container config. However, currently the Backup of Tautulli fails because the Plex Logs are changing. I had to now remove that feature and the volume mapping for Tautulli getting backed up correctly. I also see that a ToDo is to "Use Dockerman default order when no order was set before" which is good but doesn't necessarily fix the issue I highlighted above. What I would like to see is that you can "group" Containers so that they are stopped as a whole and then started after they are backed up. So, for example, Plex and Tautulli are in such a group and both are getting stopped, Tautulli is backed-up and started, then Plex is backed-up and started. 1 Quote Link to comment
Revan335 Posted June 25, 2023 Share Posted June 25, 2023 Can i select Backups for Revisions/Points and days? By rotated Drives is for example 90 days worse than revisions. Quote Link to comment
iXNyNe Posted June 25, 2023 Share Posted June 25, 2023 Does the Update containers after backup feature require CA Auto Update Applications to be installed? Quote Link to comment
KluthR Posted June 26, 2023 Author Share Posted June 26, 2023 On 6/25/2023 at 9:23 AM, Fribb said: the Backup of Tautulli fails because the Plex Logs are changing Exclude this volume path from the tautilly container. So the Plex logs are only backed up within Plex' context. 19 hours ago, Revan335 said: Can i select Backups for Revisions/Points and days? By rotated Drives is for example 90 days worse than revisions. Sorry, I dont understand 16 hours ago, iXNyNe said: Does the Update containers after backup feature require CA Auto Update Applications to be installed? No. The new plugin does it the native unraid way. 1 Quote Link to comment
Revan335 Posted June 26, 2023 Share Posted June 26, 2023 35 minutes ago, KluthR said: Sorry, I dont understand The Retention that I can selected is x Days and not x Points. Booth Options are very cool. Than i can choose through Days or Points. By Days can deleted a job all Backups on a old USB Disk. For example the last used are 120 Days and have 90 Points/Backups the Retention is 80 Days/Points. The Backup Job/Retention deleted all Backups outside the Retention. Backup Run 2x daily. By Points the Retention deleted only the Points outside the Retention. By days removed the Retention more Backups. Quote Link to comment
Kilrah Posted June 26, 2023 Share Posted June 26, 2023 Just set more days for retention? Quote Link to comment
Revan335 Posted June 26, 2023 Share Posted June 26, 2023 1 hour ago, Kilrah said: Just set more days for retention? That's an Option when the USB Disk have enough Storage. But Unfortunately, this does not solve the problem if the other disk was not connected for so long that it is outside the retention and therefore all backups would be deleted there when connecting and backing up. Instead of retention with points only those above the set retention points. Therefore a choice option would be super. Then one can take days and the other takes points. Quote Link to comment
Renegade605 Posted June 26, 2023 Share Posted June 26, 2023 20 minutes ago, Revan335 said: That's an Option when the USB Disk have enough Storage. But Unfortunately, this does not solve the problem if the other disk was not connected for so long that it is outside the retention and therefore all backups would be deleted there when connecting and backing up. Instead of retention with points only those above the set retention points. Therefore a choice option would be super. Then one can take days and the other takes points. Did you try this option? 1 Quote Link to comment
Kilrah Posted June 26, 2023 Share Posted June 26, 2023 (edited) 1 hour ago, Revan335 said: But Unfortunately, this does not solve the problem if the other disk was not connected for so long that it is outside the retention and therefore all backups would be deleted there when connecting and backing up. Instead of retention with points only those above the set retention points. If you're always doing 2 backups per day then it doesn't matter whether you keep x backups or keep backups for Y days, you can always get the same result. Keeping 30 days of backups equals keeping 60 backups. Edited June 26, 2023 by Kilrah Quote Link to comment
Revan335 Posted June 26, 2023 Share Posted June 26, 2023 2 hours ago, Renegade605 said: Did you try this option? That's its! I must be blind. This in combine with the Retention Days. I tried! Quote Link to comment
NegZero Posted June 27, 2023 Share Posted June 27, 2023 Awesome work @KluthR! I used to be able to configure notifications when containers were updated upon restart (I think it fired via CA Auto Update Notifications). That seems to be gone / I don't see how to send a webhook notification an update was completed anymore / etc. Am I missing something? Quote Link to comment
KluthR Posted June 27, 2023 Author Share Posted June 27, 2023 2 hours ago, NegZero said: I used to be able to configure notifications when containers were updated Yea, thats not possible currently. I never used the CA Auto Update plugin. if it helps, I could add a log entry with Warning level for done updates. If you set the notification level accordingly, it would produce an email. Quote Link to comment
NegZero Posted June 27, 2023 Share Posted June 27, 2023 3 hours ago, KluthR said: Yea, thats not possible currently. I never used the CA Auto Update plugin. if it helps, I could add a log entry with Warning level for done updates. If you set the notification level accordingly, it would produce an email. I'd personally like that, it's nice to have a reminder that something was updated without digging through logs. That way if you see something behaving oddly you immediately have the option of investigating the container update. Quote Link to comment
enJOyIT Posted June 29, 2023 Share Posted June 29, 2023 (edited) On 6/24/2023 at 4:47 PM, Renegade605 said: I've had ZFS related kernel panics on 6.12 as well during heavy filesystem operation. The frequency went down drastically when I changed docker from macvlan to ipvlan mode. I did get a lock up just recently but I haven't had a chance to debug it yet as my ISP is trying to fix their internet and I just got back from out of town. I'll be posting updates here when I get to them: https://forums.unraid.net/bug-reports/stable-releases/zfs-related-kernel-panic-r2458/ I thought it is related to that, so I decided a similar way... I set up a dedicated docker network (to a seperate eth) as my router needs seperate MAC-addresses to identify my devices. Since then it works without issues so far... Edited June 29, 2023 by enJOyIT Quote Link to comment
bobbintb Posted June 29, 2023 Share Posted June 29, 2023 Excellent work. Much cleaner interface, more options, inline help added. I like being able to run a script before or after the backup. I think it could already do part of that but the options were a bit confusing before. I have a script that will reboot the server if UnRAID was updated and awaiting reboot. I previously had it in user scripts but it's nicer to include it with this process as it makes more sense and is easier to manage. 1 Quote Link to comment
Rutj87 Posted June 30, 2023 Share Posted June 30, 2023 Hi Team, Getting an error when trying to backup one of my containers - any suggestions? Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.