PeterB Posted March 29, 2013 Share Posted March 29, 2013 I had transmission running, with several active torrents. I had need to reboot the server and when it came back online, all my torrents are missing - shouldn't they be preserved over a reboot? Since we often have several powercuts a day, this won't be very usable. Edit: It's also forgotten the downloads location. Edit 2: Okay, resolved! It wasn't clear what information is held in the Transmission 'Data directory' and I had assumed, foolishly, that if the data was critical, it would be copied away to permanent storage on shutdown. Clearly, the data is critical, and it isn't preserved. Having assigned the 'Data directory' to non-volatile storage, all seems well. I guess that the relevant advice about this is on the forum somewhere, but with ten pages in this thread, 120 pages in Influencer's thread and 47 pages in the original unMenu package thread, it is difficult to know where to begin looking! I also have another question - on the Transmission plugin configuration screen, there are two fields whose function is not clear: 'Show storage memory usage' and 'Show data persistency Information'. Both of these appear to default to 'Yes', but I haven't got a clue where this information will be shown. Can anyone give me any guidance? Edit 3: Oh, and one more question - how can I discourage Transmission from filling the syslog with all its informational log entries? Quote Link to comment
piotrasd Posted August 1, 2013 Share Posted August 1, 2013 latest transmission 2.81 https://truck.it/p/u843s88zjx Quote Link to comment
ICDeadPpl Posted August 1, 2013 Share Posted August 1, 2013 latest transmission 2.81 https://truck.it/p/u843s88zjx The page says "Sorry, item no longer exists." Quote Link to comment
piotrasd Posted August 1, 2013 Share Posted August 1, 2013 fixed link https://truck.it/p/4AwNFzfb4h (sorry) Quote Link to comment
publicENEMY Posted August 2, 2013 Share Posted August 2, 2013 fixed link https://truck.it/p/4AwNFzfb4h (sorry) sorry for asking but im a noob. i already have transmission installed(unplugged version). i want to install the latest version of transmission and migrating all my torrents(from unplugged) to new transmission. would you kind enough to provide such details? or a link to how to(safe and suitable for noobs) also appreciated. thanks. Quote Link to comment
piotrasd Posted August 2, 2013 Share Posted August 2, 2013 in plugin - replace this <FILE Name="/boot/packages/transmission-2.76-i686-1PTr.txz" Run="upgradepkg --install-new"> <URL>--no-check-certificate https://dl.dropbox.com/u/1574928/Unraid%20Plugins/transmission-2.76-i686-1PTr.txz</URL> </FILE> on this <FILE Name="/boot/packages/transmission-2.81-i686-1PTr.txz" Run="upgradepkg --install-new"> <URL>--no-check-certificate https://dl.dumptruck.goldenfrog.com/p/4AwNFzfb4h/transmission-2.81-i686-1PTr.txz</URL> </FILE> Here also already updated plugin version https://raw.github.com/piotrasd/UNplugged/8839495ca5b247fe78ad2c96b04544e9be4378fd/transmission_unplugged.plg Enjoy Quote Link to comment
publicENEMY Posted August 3, 2013 Share Posted August 3, 2013 in plugin - replace this <FILE Name="/boot/packages/transmission-2.76-i686-1PTr.txz" Run="upgradepkg --install-new"> <URL>--no-check-certificate https://dl.dropbox.com/u/1574928/Unraid%20Plugins/transmission-2.76-i686-1PTr.txz</URL> </FILE> on this <FILE Name="/boot/packages/transmission-2.81-i686-1PTr.txz" Run="upgradepkg --install-new"> <URL>--no-check-certificate https://dl.dumptruck.goldenfrog.com/p/4AwNFzfb4h/transmission-2.81-i686-1PTr.txz</URL> </FILE> Here also already updated plugin version https://raw.github.com/piotrasd/UNplugged/8839495ca5b247fe78ad2c96b04544e9be4378fd/transmission_unplugged.plg Enjoy Wow thank you. you should put a new thread for this. Quote Link to comment
gtroyp Posted September 8, 2013 Share Posted September 8, 2013 None of the links above are working for me. Let's just say someone was considering keeping this up to date. Could someone give me an idea of what's needed to port the version on transmissionbt.com to unraid? I need another hobby. Quote Link to comment
prostuff1 Posted September 8, 2013 Share Posted September 8, 2013 None of the links above are working for me. Let's just say someone was considering keeping this up to date. Could someone give me an idea of what's needed to port the version on transmissionbt.com to unraid? I need another hobby. check the Influencer thread. There is a version of transmission there Quote Link to comment
piotrasd Posted September 8, 2013 Share Posted September 8, 2013 check the Influencer thread. There is a version of transmission there Im compile myself, but before you must prepare environment on slackware 13.1 Quote Link to comment
grither Posted October 22, 2013 Share Posted October 22, 2013 I have transmission installed and working great! Has anyone had any luck controlling it remotely using port forwarding? I have Sab and plex running great remotely but I'm unable to with transmission Would love to access it from a remote computer or better yet an app for iOS? Any thoughts? Quote Link to comment
prostuff1 Posted October 22, 2013 Share Posted October 22, 2013 I have transmission installed and working great! Has anyone had any luck controlling it remotely using port forwarding? I have Sab and plex running great remotely but I'm unable to with transmission Would love to access it from a remote computer or better yet an app for iOS? Any thoughts? Use a VPN Quote Link to comment
grither Posted October 22, 2013 Share Posted October 22, 2013 I appreciate the feedback. I've tried to do some reading but most of it goes over my head! Do I need a pay service? I have a ddwrt router which means I think I can make a secure tunnel to that and then access both my pc and server from there? I just haven't been able to locate an install guide for 'dummies'! Quote Link to comment
prostuff1 Posted October 22, 2013 Share Posted October 22, 2013 I appreciate the feedback. I've tried to do some reading but most of it goes over my head! Do I need a pay service? I have a ddwrt router which means I think I can make a secure tunnel to that and then access both my pc and server from there? I just haven't been able to locate an install guide for 'dummies'! If you have a router with DDWRT you are likely half way there. The DDWRT site should have a little writeup in there wiki on how to set it up. You are correct in that you can set up the VPN on the router then from the computer you are on make the secure VPN connection. From there your computer will act as if it is sitting on your home network. Quote Link to comment
sdballer Posted October 26, 2013 Share Posted October 26, 2013 How come all my settings are erased and downloading torrent are cleared out when rebooting? Quote Link to comment
nordika Posted November 23, 2013 Share Posted November 23, 2013 Hi, All download links are broken. Can anyone post a valid link to update to 2.81? Thanks Quote Link to comment
barclay Posted December 23, 2013 Share Posted December 23, 2013 Hi, All download links are broken. Can anyone post a valid link to update to 2.81? Thanks +1 Quote Link to comment
Ockingshay Posted December 23, 2013 Share Posted December 23, 2013 You can have my version of 2.82 @ https://www.dropbox.com/s/nzcy0tb0hgzs2bk/transmission-2.82-i686-1PTr.txz You could even update the plg with that address if you wanted to have it as part of the plugin. If not simply add it to packages folder on your flash drive. Quote Link to comment
ars92 Posted December 24, 2013 Share Posted December 24, 2013 You can have my version of 2.82 @ https://www.dropbox.com/s/nzcy0tb0hgzs2bk/transmission-2.82-i686-1PTr.txz You could even update the plg with that address if you wanted to have it as part of the plugin. If not simply add it to packages folder on your flash drive. I'm currently using influencer's plugin for transmission. So I guess editing the plg with your txz would work just fine? Thanks in advance. Sent from my SM-N9005 using Tapatalk Quote Link to comment
Ockingshay Posted December 24, 2013 Share Posted December 24, 2013 yeah works fine.....if you already have transmission installed previously, just add that file to your packages folder on flash and through telnet run the installpkg command. Quote Link to comment
ars92 Posted December 25, 2013 Share Posted December 25, 2013 removed the old pkg, installed the new one, and have also edited the plg to point to your dropbox. 2.82 seems to be working well. Thanks for the share, Ockingshay. Quote Link to comment
Riot Posted December 27, 2013 Share Posted December 27, 2013 If you go to the upgrade branch on influencer's github that copy has all the updated packages. Not only transmission 2.82 but the dependency packages as well. https://github.com/Influencer/UNplugged/blob/Upgrade/transmission_unplugged.plg Quote Link to comment
Ockingshay Posted December 27, 2013 Share Posted December 27, 2013 If you go to the upgrade branch on influencer's github that copy has all the updated packages. Not only transmission 2.82 but the dependency packages as well. https://github.com/Influencer/UNplugged/blob/Upgrade/transmission_unplugged.plg Nice one, that saves a lot of work for people....influencer has been a busy boy Although i do recall there being issues with these updated packages conflicting with other dependencies. Simply swapping out the txz file at least i know works 100% and is what i've been using for a while now. Quote Link to comment
Riot Posted December 27, 2013 Share Posted December 27, 2013 Yeah you're right it's borked. Something must have changed since last i updated from there. Would probably be better to use the url package from it for updating so your dropbox isn't getting hammered. <FILE Name="/boot/packages/transmission-2.82-i686-1PTr.txz" Run="upgradepkg --install-new"> <URL>--no-check-certificate https://copy.com/8Zye0EQw7L6sy72K/unrad-generic/transmission-2.82-i686-1PTr.txz</URL> <MD5>e4ee16ff27d8a591cda0c958489855cd</MD5> </FILE> Quote Link to comment
goslo Posted January 29, 2014 Share Posted January 29, 2014 I deleted the 2.76 file reference and added this to the .plg file. <FILE Name="/boot/packages/transmission-2.82-i686-1PTr.txz" Run="upgradepkg --install-new"> <URL>--no-check-certificate https://copy.com/8Zye0EQw7L6sy72K/unrad-generic/transmission-2.82-i686-1PTr.txz</URL> <MD5>e4ee16ff27d8a591cda0c958489855cd</MD5> </FILE> I did a manual install and it failed with a bad MD5. So I just deleted the MD5 and it installed and Transmission 2.82 is working on my testbox. Will bad things happen? I really don't know the ramifications of deleting the checksum, if the file downloaded without it, why did it need the md5 in the first place? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.