July 18, 20169 yr Another new PMS update and the official plex docker isn't pulling in the latest version (1.01.2). Is there going to be an update to ensure the latest version is pulled? Still seeing just version 1.0.0.2261 available for non-Plex Pass users. Same here. Most recent update on the Plex website was June 23rd.
July 18, 20169 yr Does this docker only support non plex pass versions ? Yes. If you wish to use plex pass versions, use Linuxserver og binhex docker version.
July 30, 20169 yr any update on when the new version of PMS will be available..? tried manually updating but it isn't pulling the newest version.
July 30, 20169 yr any update on when the new version of PMS will be available..? tried manually updating but it isn't pulling the newest version. You might try the linuxserver version. They often push out updates a little faster.
July 30, 20169 yr any update on when the new version of PMS will be available..? tried manually updating but it isn't pulling the newest version. You might try the linuxserver version. They often push out updates a little faster. thanks, i'll remember that later. in the meantime, the new version is now available on limetech's docker repo with a force update.
July 30, 20169 yr Got a funny error with updating the Plex docker after going from 6.1.9 to 6.2-rc3... anyone know how to fix this? IMAGE ID [latest]: Pulling from limetech/plex. IMAGE ID [6ffe5d2d6a97]: Already exists. IMAGE ID [f4e00f994fd4]: Already exists. IMAGE ID [e99f3d1fc87b]: Already exists. IMAGE ID [a3ed95caeb02]: Already exists. IMAGE ID [ededd75b6753]: Already exists. IMAGE ID [1ddde157dd31]: Already exists. IMAGE ID [8d7d45a813c4]: Pulling fs layer. Downloading 100% of 771 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [eeb36e73ebd8]: Pulling fs layer. Downloading 100% of 117 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [9c89f037a839]: Pulling fs layer. Downloading 100% of 564 B. Verifying Checksum. Download complete. Extracting. Pull complete. TOTAL DATA PULLED: 117 MB Error: layers from manifest don't match image configuration
July 30, 20169 yr Got a funny error with updating the Plex docker after going from 6.1.9 to 6.2-rc3... anyone know how to fix this? IMAGE ID [latest]: Pulling from limetech/plex. IMAGE ID [6ffe5d2d6a97]: Already exists. IMAGE ID [f4e00f994fd4]: Already exists. IMAGE ID [e99f3d1fc87b]: Already exists. IMAGE ID [a3ed95caeb02]: Already exists. IMAGE ID [ededd75b6753]: Already exists. IMAGE ID [1ddde157dd31]: Already exists. IMAGE ID [8d7d45a813c4]: Pulling fs layer. Downloading 100% of 771 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [eeb36e73ebd8]: Pulling fs layer. Downloading 100% of 117 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [9c89f037a839]: Pulling fs layer. Downloading 100% of 564 B. Verifying Checksum. Download complete. Extracting. Pull complete. TOTAL DATA PULLED: 117 MB Error: layers from manifest don't match image configuration Delete and recreate docker.img then reinstall all dockers. See 6.2 release notes
August 1, 20169 yr My media files can't be located. I just moved my plex folder off my cache which was formatted for reiserfs. It was located in a folder called Apps on the cache drive. I then formatted the cache drive to xfs. I then moved my plex folder into the appdata folder. Of note I notice all the plex dockers have the folder listed as PlexMediaServer. My folder is just named plex, not sure if that should matter but I point the docker to /mnt/cache/appdata/plex I re-installed the limetech Plex docker which I had been using without a hiccup for a long time. PMS loads just fine. I can see all of my media but it can't find any of my files. When I click on add folder in PMS (as if I was going to point PMS to a folder to add media) I have no idea where it's pulling from. I'm seeing folders like mqueue, config, data etc. I know with prev dockers I could just specific /mnt as the location for the data. I don't know if the issue is with the having a new drive format (xfs) or if it's calling my docker folder appdata instead of apps or if it's because my plex folder is called plex and not PlexMediaServer or if there's something else off.
August 1, 20169 yr My media files can't be located. I just moved my plex folder off my cache which was formatted for reiserfs. It was located in a folder called Apps on the cache drive. I then formatted the cache drive to xfs. I then moved my plex folder into the appdata folder. Of note I notice all the plex dockers have the folder listed as PlexMediaServer. My folder is just named plex, not sure if that should matter but I point the docker to /mnt/cache/appdata/plex I re-installed the limetech Plex docker which I had been using without a hiccup for a long time. PMS loads just fine. I can see all of my media but it can't find any of my files. When I click on add folder in PMS (as if I was going to point PMS to a folder to add media) I have no idea where it's pulling from. I'm seeing folders like mqueue, config, data etc. I know with prev dockers I could just specific /mnt as the location for the data. I don't know if the issue is with the having a new drive format (xfs) or if it's calling my docker folder appdata instead of apps or if it's because my plex folder is called plex and not PlexMediaServer or if there's something else off. You probably don't have your media shares mapped in the template. Ie you don't have /mnt mapped to /mnt anymore like you implied you originally did Sent from my LG-D852 using Tapatalk
August 1, 20169 yr Add a container volume of /mnt mapped to a host volume of /mnt. Not the way I do mappings but it works and is easy to understand and since you already mentioned /mnt above I'm presuming you've done it on your other containers Sent from my LG-D852 using Tapatalk
August 1, 20169 yr thanks. I tried doing this earlier but just tried it again and it worked. Not sure what I did differently but you were right, that fixed it.
August 10, 20169 yr Does this docker only support non plex pass versions ? Yes. If you wish to use plex pass versions, use Linuxserver og binhex docker version. Stumbled upon this because it seems like Limetech's version of Plex hadn't seen an update in a while, but if I'm reading the posts correctly this is simply because there hasn't been one. Good enough. However, this Plex Pass comment has me curious. I have a Plex Pass, but didn't think there was any difference between the Plex dockers. I'm not sure I've really been missing anything using Limetech's version. Is there any reason I should go to the trouble to install a Plex Pass docker instead of limetech's version since I indeed have a Plex Pass?
August 14, 20169 yr Hi. After upgrading from unraid 6.1.9 to 6.2rc3, can't update or reinstall Sync docker. Getting an error: "Error: layers from manifest don't match image configuration" Thanks
August 14, 20169 yr Hi. After upgrading from unraid 6.1.9 to 6.2rc3, can't update or reinstall Sync docker. Getting an error: "Error: layers from manifest don't match image configuration" Thanks here
August 14, 20169 yr Does this docker only support non plex pass versions ? Yes. If you wish to use plex pass versions, use Linuxserver og binhex docker version. Stumbled upon this because it seems like Limetech's version of Plex hadn't seen an update in a while, but if I'm reading the posts correctly this is simply because there hasn't been one. Good enough. However, this Plex Pass comment has me curious. I have a Plex Pass, but didn't think there was any difference between the Plex dockers. I'm not sure I've really been missing anything using Limetech's version. Is there any reason I should go to the trouble to install a Plex Pass docker instead of limetech's version since I indeed have a Plex Pass? If you want the plexpass version, yes. If not, then no
August 17, 20169 yr Recently, after editing the docker PlexMediaServer to add two directory locations of mounted media, PMS no longer loads the WebGUI locally: It has lost it's port configuration. Now, I've tried to manually add it back like so: But it still wil not load with locally with, 192.168.0.100:32400. However, Plex.tv can still access it, but ofcourse, Plexpy can't because it accesses the local content. Any way to fix this up?
August 17, 20169 yr You don't need to ever add the port, as Plex runs in Host mode, and it'll all be handled automatically. Would probably be prudent to post the logs for Plex (advanced view in top right corner, then click the log button) Only two things pop into my head: - Verify Plex is still in Host mode; Remove the plex container and image and then reinstall it via CA's previous apps section
August 17, 20169 yr Log: *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 14 6 10000 /config/Library/Application Support 10000 [system] Aug 17 07:49:13 Unimatrix_Zero syslog-ng[23]: syslog-ng starting up; version='3.5.3' [Warning] WARNING: ENABLED NONE CIPHER Then when going to WebGUI: container: ff767e61d98d container: ff767e61d98d container: ff767e61d98d [Keeps going on like that, a loop] I would remove and reinstall PMS, but I have a good amount of custom images/titels/specials etc added which didn't get parsed automatically. Any way to back those up in before? Edit: Also, Plex is still in Host mode.
August 17, 20169 yr I would remove and reinstall PMS, but I have a good amount of custom images/titels/specials etc added which didn't get parsed automatically. Any way to back those up in before? Edit: Also, Plex is still in Host mode. They are all stored within the appdata folder which is NOT part of the docker image. But if you're really worried, you can backup your appdata via CA's appdata backup module
August 17, 20169 yr Settings. Appdata backup. Of its not there update CA Sent from my LG-D852 using Tapatalk
August 17, 20169 yr Ah, I see, thanks. I made a backup. Removing and reinstalling it via Previous Apps didn't fix the local functionality of Plex however. Both with and without removing the image as I'm uninstalling it and reinstalling it. Strange, the only thing I Edited on plex was adding Paths to mounted Unassigned Devices, which now, ofcourse, are gone. I don't know what else happend.
Archived
This topic is now archived and is closed to further replies.