essjay Posted May 16, 2016 Share Posted May 16, 2016 Anyone know if the Natex RAM works OK with the X9SRL-F? Currently trawling through this thread to seen if anyone is running the same combo but thought I'd ask also. Quote Link to comment
onionman Posted May 16, 2016 Share Posted May 16, 2016 Does anyone have any experience with modifying the .SDR file for the Intel 2600 CP (From the popular Natex combo). I'm working on modifying the curves for the CPU fan (I would like a lower idle speed), however I'm encountering some difficulty in identifying the part of the file that needs to be changed to affect only the CPU Fan, and not the system fans. It seems the lines 10585-10591 // Global Stepwise Curve Record 5B // Stepwise Curve ID 02 // Domain max and Count [7]-Domain Max (0=no) [6:0]-Count 1E // 30C 19 // 25% 78 // 120C 64 // 100% Control the curves for the case fans on the "Other chassis - Slow Ramp" setting, however these values have no effect on the CPU fan. I've found the following to be helpful, but no success so far: https://communities.intel.com/thread/100324?start=0&tstart=0 http://sigg-iten.ch/learningbits/2015/07/19/fan-sdr-hacking-for-the-intel-s1200v3rp/ https://forums.servethehome.com/index.php?threads/intel-xeon-e5-2670-deal-and-price-tracking.7133/page-72 Quote Link to comment
BigWorm Posted May 17, 2016 Share Posted May 17, 2016 My fellow brothers and sisters, I have ascended and now join your ranks. The next plan is to get more RAM, more HDDs and SSDs. Then when it gets released, get a GTX1080ti and turn this beast into a server and gaming platform. Sweet! Curious how you get the other Ethernet connections to show up on the dashboard. Mine only shows 1 and it's the one connected. Quote Link to comment
Bungy Posted May 18, 2016 Share Posted May 18, 2016 Sorry if I missed this in the thread, it's been a long read. Has anybody come across the issue where the Launch Console button is greyed out in the bmc remote control? I was able to enable the button by editing the html and then launch the java app, but I'm unable to get any control working. I just get an error saying "Error opening video socket" Quote Link to comment
onastvar Posted May 18, 2016 Share Posted May 18, 2016 I ordered dual as well. Haven't ordered a board yet, but leaning towards the ASRock EP2C602-4L/D16. 16 dimms, 4 ethernet, ipmi, 5 pci-e slots, 14 sata. I'm tempted by the version with 10gbit networking, but price premium is too much, plus I'd have to upgrade most of my network hardware, plus I have no driving reason for it other than to have it ;-) I have the ASRock EP2C602-4L/D16 and fired it up yesterday after receiving two e5-2670's that were snatched from ebay. Easy to setup and all seems good so far on Memtests. How loud is your system with 2 CPU/ fans? Quote Link to comment
Naldinho Posted May 18, 2016 Share Posted May 18, 2016 For the people who bought the S2600CP combo -- are you have issues with network connections? My main VM is having trouble resolving sites -- I often have to press reload to get it to load. Sites load up broken / half text. Accessing tower webgui from separate computer is also temperamental. Trying to figure out if it is the something with my settings or if I just need a better switch. Quote Link to comment
Bungy Posted May 18, 2016 Share Posted May 18, 2016 For the people who bought the S2600CP combo -- are you have issues with network connections? My main VM is having trouble resolving sites -- I often have to press reload to get it to load. Sites load up broken / half text. Accessing tower webgui from separate computer is also temperamental. Trying to figure out if it is the something with my settings or if I just need a better switch. So far I haven't noticed any issues. This is with about 30+ dockers running, but no VMs. Having to hit refresh like that and having half/text sounds like it could be dns issues, or it could be dropping connections like you're suggesting. You could try setting up a large download and see if it has issues. That may tell you if it's a bad connection. Quote Link to comment
Uroth Posted May 19, 2016 Share Posted May 19, 2016 My fellow brothers and sisters, I have ascended and now join your ranks. The next plan is to get more RAM, more HDDs and SSDs. Then when it gets released, get a GTX1080ti and turn this beast into a server and gaming platform. Sweet! Curious how you get the other Ethernet connections to show up on the dashboard. Mine only shows 1 and it's the one connected. @BigWorm Sorry for the late reply. The only thing I have done is going into the BIOS and configuring the North Bridge to allow VT-d. I haven't tried booting up unRAID with this option turned off. I am running Unraid 6.1.9 Quote Link to comment
dbrown2 Posted May 19, 2016 Share Posted May 19, 2016 Helllo, A little late to the game, but I guess better late than never. I am going to upgrade my Pentium 4 Unraid box with the following: CPU SR0KX INTEL XEON E5-2670 8 CORE 2.60GHz 64 GB Ram [url=http://ebay.to/1qwcnEW PSU http://www.newegg.com/Product/Product.aspx?Item=N82E16817139083 Antec Nine Hundred V1 Case (I already owned it) And one of the two MB's below. (Are they basicaly the same?) Is one better? MBD-X9DRL-IF-B ASRock EP2C602-4L/D16 I would like to try a few (3) VM's and my 16TB (all 4TB) drives and one SSD cache drive Thank you David Quote Link to comment
Shamalamadindong Posted May 20, 2016 Author Share Posted May 20, 2016 Get the Asrock, more RAM slots so you have room to upgrade your RAM and it has full size PCI-e ports. Edit: and quad gigabit, just in case Unraid ever gets quad gigabit teaming. Quote Link to comment
ijuarez Posted May 20, 2016 Share Posted May 20, 2016 Install a Dell YT674 Intel PRO/1000 Quad Port Gigabit PCIe Network on my S2600CPJ board and its working great. I did disable the on-board nic tho. and at a maximum of 512GB of ram im pretty sure it can handle ram. Quote Link to comment
BigWorm Posted May 21, 2016 Share Posted May 21, 2016 My fellow brothers and sisters, I have ascended and now join your ranks. The next plan is to get more RAM, more HDDs and SSDs. Then when it gets released, get a GTX1080ti and turn this beast into a server and gaming platform. Sweet! Curious how you get the other Ethernet connections to show up on the dashboard. Mine only shows 1 and it's the one connected. @BigWorm Sorry for the late reply. The only thing I have done is going into the BIOS and configuring the North Bridge to allow VT-d. I haven't tried booting up unRAID with this option turned off. I am running Unraid 6.1.9 Well crap. I enabled VT-d but it messes up the Marvell controller and unraid can't seen anything connected to those ports. At the moment I am using 2 of them. Quote Link to comment
saarg Posted May 21, 2016 Share Posted May 21, 2016 My fellow brothers and sisters, I have ascended and now join your ranks. The next plan is to get more RAM, more HDDs and SSDs. Then when it gets released, get a GTX1080ti and turn this beast into a server and gaming platform. Sweet! Curious how you get the other Ethernet connections to show up on the dashboard. Mine only shows 1 and it's the one connected. @BigWorm Sorry for the late reply. The only thing I have done is going into the BIOS and configuring the North Bridge to allow VT-d. I haven't tried booting up unRAID with this option turned off. I am running Unraid 6.1.9 Well crap. I enabled VT-d but it messes up the Marvell controller and unraid can't seen anything connected to those ports. At the moment I am using 2 of them. It should work if you add iommu=pt after append in your syslinux.cfg on the flash drive. Quote Link to comment
Naldinho Posted May 28, 2016 Share Posted May 28, 2016 On the Natex Combo (S2600CP2) is there a limitation that only one NIC can be used at 1000Mb/s and the other must be 100Mb/s? I was originally using eth1 at 1000MB/s and then I connected eth0 in preparation for bonding and I saw that eth0 was at 100Mb/s but thought that would resolve itself once I bonded the two NICs but that does not appear to be the case. After I bonded the NICs I got the following Network: bond0: IEEE 802.3ad Dynamic link aggregation eth0: 1000Mb/s - Full Duplex eth1: 100Mb/s - Full Duplex So eth0 is now at 1000Mb/s but eth1 has switched to 100 Am I doing something wrong or is this a limitation of the controller? Quote Link to comment
RobJ Posted May 28, 2016 Share Posted May 28, 2016 On the Natex Combo (S2600CP2) is there a limitation that only one NIC can be used at 1000Mb/s and the other must be 100Mb/s? I was originally using eth1 at 1000MB/s and then I connected eth0 in preparation for bonding and I saw that eth0 was at 100Mb/s but thought that would resolve itself once I bonded the two NICs but that does not appear to be the case. After I bonded the NICs I got the following Network: bond0: IEEE 802.3ad Dynamic link aggregation eth0: 1000Mb/s - Full Duplex eth1: 100Mb/s - Full Duplex So eth0 is not at 1000Mb/s but eth1 has switched to 100 Am I doing something wrong or is this a limitation of the controller? I don't have any of your equipment, so you'll get better answers from others that do. But I just wanted to say a limitation like that is extremely unlikely. It is far more likely you have network issues, such as a bad switch or bad cables or connectors or a bad NIC. Quote Link to comment
gert Posted May 29, 2016 Share Posted May 29, 2016 After many months consideration I ended up pulling the trigger and acquired 2 of the these CPUs, with the ASUS Z9PA-D8/iKVM board and some Noctua NH-U12DX i4 coolers. i was lucky to pick up some PC10600R ram cheap (48 GB) My reasons for going with this combo. I was using the Fractal Design - Define R4 and was happy with it (sits vertically on a shelf), i have no room for bigger cases (for SSI EEB), so it had to be ATX I wanted PCIE 3.0 x16 slots for playing around with replacing my gaming/desktop PC later on (other ATX motherboard options was very limited). I wanted enough PCIE ports to add a HBA and other cards for more Video card pass through (replace my HTPC) I wanted IPMI functionality. It had to be 2 CPUs for it to be worth it replacing my E3 haswell with Supermicro X10SL7-F (meaning i had to add a HBA as well) In the end i am happy with my choice even if i don't think it is the same quality as my previous SM board and i do observe added heat from the 2 CPUs with higher TDP and doesn't have Haswell efficiency, so my drive temps in general has gone up to an average of 40c with several drives spun up, but since they are WD reds they should be able to cope fine with this. Observations. the CPUs boots often to 3.0-3.1 Ghz on all cores. Temperatures is average 45c/62c (idle/load) Quote Link to comment
ijuarez Posted May 30, 2016 Share Posted May 30, 2016 how are you guys monitoring cpu temps? Quote Link to comment
Naldinho Posted May 30, 2016 Share Posted May 30, 2016 how are you guys monitoring cpu temps? I'm certain someone more knowledgeable can give you a better answer but all I did was install Dynamix System Temperature and PERL. After that it is pretty simple -- Settings will now have a system temperature option you go to it press Detect and the only sensor mine detect was coretemp so you press save. After that just select which of them you want to display and save. Once you've detected the sensor you should then remove PERL unless you need it for something else. My CPU temp is usually 39 -- I don't do much that is taxing. I have a bunch of VMs but no transcoding or anything like that. Quote Link to comment
aptalca Posted May 30, 2016 Share Posted May 30, 2016 I'm using the ipmi plugin (assuming your board has ipmi). It can put the temps in the footer of the unraid gui Quote Link to comment
ijuarez Posted May 31, 2016 Share Posted May 31, 2016 I'm using the ipmi plugin (assuming your board has ipmi). It can put the temps in the footer of the unraid gui I have the Natex S2600CPJ i need to look at the manual, but thanks for the suggestions. Quote Link to comment
betaman Posted May 31, 2016 Share Posted May 31, 2016 I'm using the ipmi plugin (assuming your board has ipmi). It can put the temps in the footer of the unraid gui I have the Natex S2600CPJ i need to look at the manual, but thanks for the suggestions. As Naldinho already mentioned, just install the Dynamix system temp plugin and Perl (first run only). Grab the temps you want displayed and they'll show up in the footer of the Dynamix UnRAID webgui. I noticed CPU2 runs hotter than CPU1 in my config so I picked it and the board temp to display. Works great. Quote Link to comment
ijuarez Posted May 31, 2016 Share Posted May 31, 2016 Well crafted I Google that plug in and it pull up old guide not my gui for unraid is all wacked out. Hopefully I can reverse the changes Sent from my SAMSUNG-SM-N920A using Tapatalk Quote Link to comment
aptalca Posted May 31, 2016 Share Posted May 31, 2016 Well crafted I Google that plug in and it pull up old guide not my gui for unraid is all wacked out. Hopefully I can reverse the changes Sent from my SAMSUNG-SM-N920A using Tapatalk It's best to install plugins from the community applications Quote Link to comment
ijuarez Posted May 31, 2016 Share Posted May 31, 2016 Yes you right, but the Google search took me to the old guide. Sent from my SAMSUNG-SM-N920A using Tapatalk Quote Link to comment
auggiekc Posted June 17, 2016 Share Posted June 17, 2016 I have joined!! Setup: 2x e5-2670 8x 8GB ECC 1600 SuperMicro X9DRL-IF Corsair RM850i 2x Hyper 212 Evo 2x 128GB SSD 7x other drives totalling 21GB Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.